EM05 Data Sheet - 2004-09-20 EM05 - ESM with Transmeta Crusoe TM5900 u Embedded System Module with: u TM5900 / 800 MHz u Up to 512 MB DDR RAM (SO-DIMM), CompactFlash u Dual Fast Ethernet, dual COM (front) u Graphics optional via FPGA (plus 8 MB SDRAM) u Further COMs, CAN, IDE etc. optional via FPGA (USB, keyboard/mouse, floppy etc. optional on carrier board) u Stackable with PCI-104 The EM05 is a complete embedded single-board computer controller etc. can also be realized in the FPGA to for use on any carrier board in different industrial the needs of the individual application. The environments. The final application consists either of functionality of the FPGA is dynamically loaded by the a stand-alone EM05, the EM05 with an application-application software. specific carrier card and/or with additionally plugged The EM05 is a powerful yet low-cost industrial PC PCI-104 modules.which is designed to operate in harsh environments -- The EM05 is controlled by the Crusoe TM5900 an ideal solution also for infotainment applications. microprocessor from Transmeta, a Pentium-like x86 with For a first evaluation of the functions of the EM05 it an integrated Northbridge that operates at 800MHz. is strongly recommended to use the EK03 ESM starter What makes this CPU especially attractive is its kit. The kit consists of the standard CPU module, an extremely low power consumption of typically 5W at FPGA loaded with additional I/O functions, the carrier 800MHz and a long-term availability of five years.card with I/O connectors, an external PSU, VGA and The EM05 is equipped with an onboard 133MHz fast DDR RJ45 to D-Sub cables, and an adapter for mounting a RAM SO-DIMM socket for data and a CompactFlash slot PCI-104 module. for scalable program storage. At its front panel the ESM modules are complete computers on a plug-on EM05 provides two RS232 interfaces and two Fast module. They consist of the hardware (CPU, chip set, Ethernet channels via RJ45 connectors or 9-pin D-Sub memory, I/O) which is not fixed to any application- connectors. Further I/O deriving from the onboard specific function, and an FPGA programmed in VHDL Super I/O controller such as USB, IDE, PS/2 etc. can code, which provides I/O that is also still be routed to the I/O connector of the ESM by means of independent of a specific application. ESM modules are an FPGA -- with the corresponding connectors available based on PCI. They have two system connectors: J1 has on a carrier board. In the same flexible way, a fixed signal assignment, while J2 is variable additional functionality such as serial interfaces, depending on the final application-specific CAN bus controllers, protocol converters, touch configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. ® 1 Embedded Solutions EM05 Data Sheet - 2004-09-20 Technical Data CPU Miscellaneous • CPU • Real-time clock · Transmeta Crusoe TM5900 Microprocessor with integrated • Power supervision and watchdog Northbridge Electrical Specifications · 800MHz • Supply voltage/power consumption: Memory · +5V (4.85V..5.25V), 2A max. • 64KB L1 and 512KB L2 Cache integrated in Crusoe CPU · +3.3V (3.0V..3.6V), 2A max. • SO-DIMM slot for up to 512MB DDR RAM (1GB on request) • MTBF: 84,000h @ 50°C · 133MHz memory bus operation Mechanical Specifications · 64-bit data bus, 2.5V • Dimensions: conforming to ESM specification (PCB: 149mm x • Flash 4MB 71mm) · 8-bit data bus, 3.3V • Weight: 110g (w/o heat sink, w/o CompactFlash card); heat · Hardware data protection sink: 155g • Serial EEPROM 4kbit for factory settings • CompactFlash (TM) card interface for Flash ATA (true IDE) Environmental Specifications via on-board IDE • Temperature range (operation): • Up to 8MB SDRAM, connected to FPGA, e.g. for video data · 0..+60°C · Industrial temperature range on requestInterfaces · Airflow: min. 10m³/h • Two 10/100Mbits/s Ethernet channels • Temperature range (storage): -40..+85°C · Intel GD82551ER controllers • Relative humidity (operation): max. 95% non-condensing · Two RJ45 connectors or one 9-pin D-Sub connector at front • Relative humidity (storage): max. 95% non-condensing panel • Altitude: -300m to + 3,000m • Two UART RS232 serial interfaces (COM1/COM2) • Shock: 15g/11ms · Two RJ45 connectors or one 9-pin D-Sub connector at front • Bump: 10g/16ms panel • Vibration (sinusoidal): 2g/10..150Hz · Up to 230 kbaud · COM1/COM2 also available for rear I/O Safety • One UART RS232 serial interface (COM3), via rear I/O • PCB manufactured with a flammability rating of 94V-0 by • IDE port for hard-disk drives via rear I/O UL recognized manufacturers · Ultra DMA100 support EMC Additional I/O through FPGA and Super I/O • Tested according to EN 55022 (radio disturbance), • Available at I/O connector IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to • Super I/O CE conformity · USB 1.1 · Keyboard Software Support · Mouse • Award BIOS · Floppy disk interface • Linux · AC'97 • Windows • FPGA I/O • VxWorks (on request) · Depending on FPGA composition • MSCAN/Layer2 support: MEN Driver Interface System (MDIS · TFT for Windows, Linux, VxWorks, QNX, RTX, OS-9) · VGA · SRAM · Other/further I/O options on request PCI Interface • 32-bit PCI interface at PCI-104 connector J1 • Support of 4 external masters ® 2 Embedded Solutions EM05 Data Sheet - 2004-09-20 Diagram ® 3 Embedded Solutions EM05 Data Sheet - 2004-09-20 Related Products Standard Hardware 08EK03-00 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, COM2 switchable, TFT/VGA, PS/2, IDE, floppy interfaces; ESM EM05 with Crusoe TM5900 / 800MHz, 2 Fast Ethernet, 2 COMs, FPGA functions (graphics 800x600, TFT, floppy); temperature range: 0..+60°C; incl. VGA cable, RJ45 to D-Sub cable, keyboard/mouse y-cable, external PSU and adapter for mounting of one PCI-104 module - 512MB DRAM installed, CompactFlash not installed (08EK03-00 = EC01-06 + EM05-00 + SA13-01) 15EM05-00 EM05, ESM - Embedded System Module, Transmeta TM5800 / 800MHz, CompactFlash slot, SO-DIMM DRAM slot, dual Fast Ethernet, dual COM; standard FPGA contents graphics 800x600, TFT, floppy; temperature range: 0..+60°C Please refer to our ESM - Embedded System Modules compare chart for a selection of further single-board computers with different processors and on-board functionality. Altera offers free download of its FPGA development software: The Quartus II Web Edition software includes a complete environment for FPGA and CPLD design, including schematic- and text-based design entry, integrated VHDL and Verilog HDL synthesis and support for third-party synthesis software, SOPC Builder system generation software, place-and-route, verification, and programming. For more information and free download of the software please refer to www.altera.com/products. The Altera Tools Selector guide describes the Altera tool offerings and requirements. The online version of the document is available at www.altera.com/literature. Accessories 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0105 512MB DDRAM 0..+60°C for 15EM05-00 08SA13-00 Serial interface adapter, PS/2 for keyboard/mouse, -40..+85°C Software 13EM05-71 Windows 2000/XP network driver for F8 and EM05 (ESM kit EK03) 13Z018-06 MDIS4/2004 low-level driver sources for EM05 watchdog Documentation 20EM05-00 EM05 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the EM05 online data sheet under www.men.de. --> Click here! ® 4 Embedded Solutions EM05 Data Sheet - 2004-09-20 Contact Information Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® Embedded Solutions