EK03 Data Sheet - 2004-09-20 EK03 - ESM Starter Kit with Transmeta Crusoe TM5900 u Computing module ESM EM05: - Crusoe TM5900 / 800MHz - 512MB DRAM (DDR SO-DIMM), CompactFlash slot - 2 Fast Ethernet, 2 COMs (front) - Keyboard/mouse, IDE, floppy (rear) u Cyclone FPGA with additional I/O: - Graphics, TFT, floppy, PS/2, IDE, COM2 u Carrier card EC01 (ATX-compatible format): - 1 ESM slot, 3 PCI slots - USB, serial, IDE, floppy connectors - TFT, VGA u Accessories: - External PSU, PCI-104 adapter - VGA cable, RJ45 to D-Sub cable Embedded System Modules are complete computers on a CPU attractive is its low power consumption of module. A final application consists either of a stand-typically 5W at 800MHz and a long-term availability of alone ESM, an ESM with an application-specific carrier five years. The EM05 is equipped with 512MB DDR RAM card and/or an ESM with additionally plugged PCI-104 (133MHz) and a CompactFlash slot for scalable program modules.storage. It provides two RS232 interfaces and two Fast The EK03 is a starter kit that allows evaluation of Ethernet channels via RJ45 connectors at its front the functions of the ESM EM05. The kit consists of the panel. CPU module, an FPGA with additional I/O functions, the Further I/O deriving from the onboard Super I/O carrier card, DRAM memory, PSU, VGA and RJ45 to D-Sub controller such as USB, IDE, PS/2 etc. are routed to cables, and an adapter for mounting a PCI-104 module. the I/O connector of the ESM by means of an FPGA. The EK03 provides versatile mounting options and can Additional I/O functionality is implemented in the also be installed in a standard PC.onboard FPGA, comprising a graphics controller with After evaluation, the design overhead for each 800x600 resolution and controllers for IDE, SPI and application is limited to I/O. Depending on the GPIO. The physical interfaces are accessible on the application and quantity it may be necessary to carrier board which is included in the kit. develop a simple carrier card, choose PCI-based The ATX-compatible carrier board provides the standard components, load additional I/O functions mechanical platform, the power supply and the I/O into the FPGA, write software drivers for those connectors. It comes with one ESM slot and three PCI additional functions, or design a housing.slots, which allow the use of standard extension cards The EM05 is a powerful industrial PC designed to in the PC. It is equipped with USB (front), a 9-pin operate in harsh environments (-40 to +85°C, D-Sub for RS232 or RS422 or RS485 (front) and shock, vibration, humidity etc.) -- an ideal solution connectors for IDE, floppy, PS/2, TFT, and VGA. also for infotainment applications. It is controlled Optionally, the floppy can be replaced by 4 SA by the Crusoe TM5900 from Transmeta, a Pentium-like adapters. Thus, further serial lines and CAN would be x86 with an integrated Northbridge. What makes this available via FPGA on the carrier. The ESM carrier also features an I2C EEPROM for the board ID and revision information. ® 1 Embedded Solutions EK03 Data Sheet - 2004-09-20 Technical Data EC01 ESM Carrier Card Electrical Specifications • One ESM slot • Supply voltage/power consumption: • J1 and J2 assembled · EC01: +12V, 1.6A; +12V on pin 1, GND on pin 2 • I/O connectors · EM05: +5V (4.85V..5.25V), 2A max. · USB 2.0 · EM05: +3.3V (3.2V..3.4V), 2A max. · IDE connector • MTBF EM05: tbd. @ 50°C · PS/2 keyboard/mouse connector, via SA adapter Mechanical Specifications · TFT connector • Dimensions of EC01 PCB: 170mm x 150mm · VGA connector • EM05 conforming to ESM specification (PCB: 149mm x 71mm) · Floppy disk interface • Weight · RS232/422/485 COM interface (currently not supported) · EC01: 200g (without floppy drive) • PCI interface · EM05: 110g (w/o heat sink, w/o CompactFlash card); heat · Three PCI slots sink: 155g · 33MHz, 32-bit data bus, 5V V-I/O • Reset button and power LED Environmental Specifications • Temperature range (operation):EM05 ESM Module · 0..+60°C • CPU: Transmeta Crusoe TM5900 / 800MHz · Industrial temperature range on request • Memory · Airflow: min. 10m³/h · 64KB L1 and 512KB L2 Cache integrated in Crusoe CPU • Temperature range (storage): -40..+85°C · 512MB SO-DIMM DDR RAM installed • Relative humidity (operation): max. 95% non-condensing · CompactFlash interface • Relative humidity (storage): max. 95% non-condensing · Flash 4MB • Altitude: -300m to + 3,000m · Serial EEPROM 4kbit for factory settings • Shock: 15g/11ms • Interfaces • Bump: 10g/16ms · Two 10/100Mbits/s Ethernet channels, RJ45 at front panel • Vibration (sinusoidal): 2g/10..150Hz · Two UART RS232 serial interfaces (COM1/COM2), RJ45 at front panel Safety · One UART RS232 serial interface (COM3), via EC01 • PCB manufactured with a flammability rating of 94V-0 by (currently not supported) UL recognized manufacturers • Mass storage: Fast IDE ports for IDE devices (40-pin, via EC01) and CompactFlash EMC • I/O Extension • Tested according to EN 55022 (radio disturbance), · Accessible on EC01 IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to · Keyboard CE conformity · Mouse · TFT/VGASoftware Support · Floppy • Award BIOS · COM3 (currently not supported) • Linux • PCI Interface • Windows · 32-bit/33-MHz PCI interface at PCI-104 connector J1 • VxWorks (on request) · Support of 4 external masters Accessories • External PSU • Adapter for mounting of one PCI-104 module • VGA cable (15-pin HD-Sub) • RJ45 to 9-pin D-Sub cable • Keyboard/mouse Y-cable • SA13 PS/2 adapter ® 2 Embedded Solutions EK03 Data Sheet - 2004-09-20 Diagram ® 3 Embedded Solutions EK03 Data Sheet - 2004-09-20 Related Products Standard Hardware 08EK03-00 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, COM2 switchable, TFT/VGA, PS/2, IDE, floppy interfaces; ESM EM05 with Crusoe TM5900 / 800MHz, 2 Fast Ethernet, 2 COMs, FPGA functions (graphics 800x600, TFT, floppy); temperature range: 0..+60°C; incl. VGA cable, RJ45 to D-Sub cable, keyboard/mouse y-cable, external PSU and adapter for mounting of one PCI-104 module - 512MB DRAM installed, CompactFlash not installed (08EK03-00 = EC01-06 + EM05-00 + SA13-01) 15EM05-00 EM05, ESM - Embedded System Module, Transmeta TM5800 / 800MHz, CompactFlash slot, SO-DIMM DRAM slot, dual Fast Ethernet, dual COM; standard FPGA contents graphics 800x600, TFT, floppy; temperature range: 0..+60°C Please refer to our ESM - Embedded System Modules compare chart for a selection of further single-board computers with different processors and on-board functionality. Altera offers free download of its FPGA development software: The Quartus II Web Edition software includes a complete environment for FPGA and CPLD design, including schematic- and text-based design entry, integrated VHDL and Verilog HDL synthesis and support for third-party synthesis software, SOPC Builder system generation software, place-and-route, verification, and programming. For more information and free download of the software please refer to www.altera.com/products. The Altera Tools Selector guide describes the Altera tool offerings and requirements. The online version of the document is available at www.altera.com/literature. Accessories 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0105 512MB DDRAM 0..+60°C for 15EM05-00 08SA13-00 Serial interface adapter, PS/2 for keyboard/mouse, -40..+85°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 13EM05-71 Windows 2000/XP network driver for F8 and EM05 (ESM kit EK03) ® 4 Embedded Solutions EK03 Data Sheet - 2004-09-20 Related Products 13Z018-06 MDIS4/2004 low-level driver sources for EM05 watchdog Documentation 20EK03-00 EK03 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the EK03 online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 5 Embedded Solutions