EM02 Data Sheet - 2004-09-22 EM02 - ESM with Tualatin Pentium III u Embedded System Module with: u Tualatin ULP Pentium III / 933 MHz u Tualatin ULV Celeron / 400 MHz u Up to 512 MB DRAM, CompactFlash u Graphics, USB 1.1 (front) u Gigabit Ethernet (front) u DVI/TFT/video (rear) u 1 COM, keyboard/mouse, (E)IDE, floppy (rear) u Stackable with PCI-104 The EM02 is a complete embedded single-board computer well as two PS/2 interfaces for keyboard and mouse. for use on any carrier board in different industrial The EM02 is an ideal computing platform for embedded environments. The final application consists either of industrial PCs, offering the whole world of Windows a stand-alone EM02, the EM02 with an application-and Linux based software, e.g. for infotainment specific carrier card and/or with additionally plugged applications. PCI-104 modules. The EM02 is controlled by an Ultra-Low Power Tualatin For a first evaluation of the functions of the EM02 it Pentium III with 933MHz or an Ultra-Low Voltage is strongly recommended to use the EK01 ESM starter Tualatin Celeron Processor with 400MHz. It provides kit. The kit consists of the standard CPU module, the 16KB L1 cache controlled by processor programmable carrier card with I/O connectors, an external PSU, and registers and 512KB/256KB L2 cache for ECC protected an adapter for mounting a PCI-104 module. cache data array. The EM02 uses the Intel 815G chip set, including ESM modules are complete computers on a plug-on graphics. It provides one VGA connector, one USB module. They consist of the hardware (CPU, chip set, connector Type A and one Gigabit or one Fast Ethernet memory, I/O) which is not fixed to any application- interface at the front panel. It also has an SO-DIMM specific function, and an FPGA programmed in VHDL socket and a CompactFlash interface on board. As an code, which provides I/O that is also still alternative to onboard USB, legacy I/O is routed to independent of a specific application. ESM modules are the carrier board via the J2 system connector of the based on PCI. They have two system connectors: J1 has EM02. It includes a serial interface, (E)IDE, a hub a fixed signal assignment, while J2 is variable interface for DVI/TFT/video, a floppy interface, as depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. ® 1 Embedded Solutions EM02 Data Sheet - 2004-09-22 Technical Data CPU • Support of 4 external masters • Celeron or Pentium III Miscellaneous • 400MHz or 933MHz processor core frequency • Battery-backed real-time clock • 256KB or 512KB L2 cache • Integrated hardware monitor • 100MHz or 133MHz system bus frequency • 33MHz APIC bus frequency Electrical Specifications • Supply voltage/power consumption:Graphics · +5V (4.85V..5.25V), 796mA (Celeron version) • Integrated VGA graphics controller · +3.3V (3.2V..3.4V), 794mA (Celeron version) · Connection at front panel via VGA connector • MTBF: 165,000h @ 50°C Memory Mechanical Specifications • 512MB SDRAM • Dimensions: conforming to ESM specification (PCB: 149mm x · One 144-pin SO-DIMM socket for synchronous DRAM modules 71mm) · 133/100MHz memory bus frequency • Weight: 215g (incl. heat sink) • CompactFlash interface · Type I Environmental Specifications · True IDE • Temperature range (operation): · 0..+60°CInterfaces · Industrial temperature range on request • 10/100/1000Base-T PCI Ethernet controller · Airflow: min. 10m³/h · 82540(EM) controller • Temperature range (storage): -40..+85°C · RJ45 interface at front panel • Relative humidity (operation): max. 95% non-condensing · Three onboard LEDs to signal LAN Link, Activity status • Relative humidity (storage): max. 95% non-condensing and connection speed (10/100/1000Base-T) • Altitude: -300m to + 3,000m · Supports network boot • Shock: 15g/11ms • USB 1.1 interface • Bump: 10g/16ms · Type A • Vibration (sinusoidal): 2g/10..150Hz · UHCI implementation · At front panel Safety · Data throughput up to 12Mbits/s • PCB manufactured with a flammability rating of 94V-0 by · Supplies High-Power (500mA) without external power supply UL recognized manufacturers Mass Storage EMC • Fast IDE ports • Tested according to EN 55022 / 1999-05 (radio · One IDE hard-disk/CD-ROM port via I/O connector to disturbance) and EN 55024 / 1999-05 (immunity) with carrier board regard to CE conformity · One IDE port for local CompactFlash Software Support I/O Extension • Phoenix BIOS • Super I/O • Windows • Accessible via J2 • Linux (on request) · Keyboard • VxWorks (on request) · Mouse • QNX (on request) · COM1 • RTX (on request) · Floppy · TFT panel · AC'97 audio (on request) PCI Interface • 32-bit PCI interface at PCI-104 connector J1 ® 2 Embedded Solutions EM02 Data Sheet - 2004-09-22 Diagram ® 3 Embedded Solutions EM02 Data Sheet - 2004-09-22 Related Products Standard Hardware 08EK01-01 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, floppy interface; ESM EM02 with ULP Pentium III / 933MHz, graphics, Gigabit Ethernet, USB; temperature range: 0..+60°C; incl. external PSU and adapter for mounting of one PCI-104 module - 512MB DRAM installed, CompactFlash not installed (08EK01-01 = EC01-03 + EM02-04) 08EK01-02 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, floppy interface; ESM EM02 with ULV Pentium III Celeron/ 400MHz, graphics, Gigabit Ethernet, USB; temperature range: 0..+60°C; incl. external PSU and adapter for mounting of one PCI-104 module - 512MB DRAM installed, CompactFlash not installed (08EK01-02 = EC01-03 + EM02-07) 08EK01-03 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, floppy interface; ESM EM02 with ULV Celeron 650MHz, graphics, Gigabit Ethernet, USB; temperature range: 0..+60°C; incl. external PSU and adapter for mounting of one PCI-104 module - 512MB DRAM installed, CompactFlash not installed (08EK01-03 = EC01-03 + EM02-09) 15EM02-04 EM02, ESM - Embedded System Module, ULP Pentium III / 933MHz, CompactFlash slot, 512MB DRAM installed, graphics, Gigabit Ethernet, USB; PCI-104 stackable; temperature range: 0..+60°C 15EM02-07 EM02 for ESM Kit EK01-02, ESM - Embedded System Module, ULV Celeron / 400MHz, CompactFlash slot, 512MB DRAM installed, graphics, Gigabit Ethernet, USB;temperature range: 0..+60°C 15EM02-09 EM02 for ESM Kit EK01-03, ESM - Embedded System Module, ULV Celeron / 650MHz, CompactFlash slot, 512MB DRAM installed, graphics, Gigabit Ethernet, USB; temperature range: 0..+60°C Please refer to our ESM - Embedded System Modules compare chart for a selection of further single-board computers with different processors and on-board functionality. Accessories 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0096 512MB DRAM 0..+60°C for 15EM02-04 (08EK01-01) 0752-0156 512MB DRAM 0..+60°C for 15EM02-07 (08EK01-02) ® 4 Embedded Solutions EM02 Data Sheet - 2004-09-22 Related Products 0752-0166 512MB DRAM 0..+60°Cfor 15EM02-09 (08EK01-03) Software This MEN board is designed to work in a Microsoft Windows environment. For additional Windows driver packages provided or recommended by MEN please refer to the ordering numbers below. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. This board is an MEN product running Linux. For Linux BSP and driver support provided by MEN please refer to the ordering numbers below. 13EM02-70 Windows 2000/XP graphics driver (Intel graphics driver for 815 chipset) for A13, EM02 (ESM kit EK01) 13EM02-71 Windows 2000/XP network driver (Intel) for A13 and EM02 (ESM kit EK01) - only for 933MHz versions! 13Z011-06 MDIS4/2004 low-level driver sources for F7/F7N/D4/EM02 watchdog 13Z011-70 MDIS4/2004 Windows NT4/W2K driver for F7/F7N/D4/EM02 watchdog Documentation 20ABMX-00 Phoenix BIOS user manual 20EK01-00 EK01 user manual, includes EM02 user manual (20EM02-00) 20EM02-00 EM02 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the EM02 online data sheet under www.men.de. --> Click here! ® 5 Embedded Solutions EM02 Data Sheet - 2004-09-22 Contact Information Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® Embedded Solutions