Visual UpTime Select ASE model 807-0112 T1 CSU/DSU ASE With DSX-1, Drop-and-Insert, and Modem The Visual UpTime® Select™ T1 CSU/DSU ASE is The ASE’s “drop-and-insert” feature provides a Key features deployed on a T1 access line at the demarcation point secondary DSX-1 port that can connect to a Private • Inband management capabilities between the provider network and customer premises. Branch Exchange at a customer’s site. T1 Timeslots It supports full and fractional (FT1) T1 networks and can be segmented for a PBX on the same circuit • Multi-Protocol or IP Transport software provides connectivity through V.35 and additional carrying data trafŢ c (see Ţ gure). The ASE’s internal • Service Level Agreement (SLA) metrics digital cross connect signal (DSX-1) interfaces. modem lets users establish a telephone connection • Drop-and-Insert capabilities through The ASE supports Multi-Protocol software for deploy- to either the ASE’s administrative interface or a pass- DSX port ment in standard frame relay or HDLC networks and IP through connection via the serial port. • Internal modem Transport software for deployment in networks that • Voice over IP (VoIP) analysis capability use IP switching. • Application analysis capability • LMI spooŢ ng • LAN management port • Power loss detection • Realtime events T1 CSU/DSU model 807-0112 front view T1 CSU/DSU model 807-0112 rear view CSU/DSU ASE T1 Access V.35 Line Line Wide Area Network Visual Modem Optional LAN Connection Connection UpTime Select PBX PBX Server Tl h T1 CSU/DSU model 807-0112 position on network Technical Data What are ASEs? T1 CSU/DSU ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) Plastic case with internal power supply. collection and network performance monitor- Weight 2.10 lbs. ing hardware devices placed on a wide area Data Rate 1.544 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode Derived externally from the T1 network or DSX-1 as part of the Visual UpTime Select system, interface, or internally from the ASE. which offers in-depth, real-time, and historical o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) visibility into the performance of your o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) applications infrastructure. In the system, Clearance Requirement Minimum of 3” (7.62 cm) space on sides. data gathered by ASEs is stored in the Visual Operating/Storage Humidity 10% to 90%, noncondensing UpTime Select server and displayed and ana- Power Requirements Input 100 to 120 VAC lyzed from the Visual UpTime Select Web client. Frequency 50/60 Hz As a service level management tool, ASEs Input Current Rating 0.5 amps T1 Network Interface Line Rate 1.544 Mbps ±50 bps synchronous indicate when services are being met, provide Line Format AMI or B9ZS line coding warnings when services start to degrade, and Framing ESF or D4 framing formats send alerts when services are not met. ESF FDL ANSI T1.403, AT&T TR54016, Both, or None Hardware Warranties Input Signal 0dB to -36dB Enhanced Gold, Bronze, and International Output Signal 0, -7.5dB, -15dB, -22.5dB LBO Pulse Density AT&T 62411 Gold ASE hardware warranty service programs Connector 8-pin modular jack—USOC: RJ48C are available to help you maximize your Timing Loop, DSX-1, or Internal investment in Visual UpTime Select. For more Channel Selection 1 to 24 channels in any combination detailed warranty information, visit: Network DTE Interface ConŢ guration DCE for interfacing with DTE www.fl ukenetworks.com/visualcustomercare (Data Port) Data and Clock Leads ITU-T V.35 Signaling Leads EIA RS-232 (ITU-T V.28) Ordering Information Data Rates 56 kbps x N or 64 kbps x N (N = 1 through 24) For more details, please contact your Visual HDLC Inversion Selectable V.35 data inversion UpTime Select authorized reseller or Transmit Timing Basis Network selected-source timing Fluke Networks Sales at (800) 240-4010 Receive Timing Basis SCT, inverted SCT, SCTE or (301) 296-2300. Receive Line Data Not Valid RLSD, CTS Connector Female 34-pin V.35 connector DSX-1 Interface Line Rate 1.544 Mbps ±50 bps Line Format AMI or B8ZS Framing ESF or D4 (SF) Input Signal -1dB to -11dB Line Equalization 0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft Connector RJ-45 Channel Selection 1 to 24 channels in any combination Serial Port Interface SpeciŢ cations 19200 or 9600 bps baud rate, 8 data bits no parity, NETWORK SUPER VISION 1 stop bit, EIA RS-232 DTE electrical format, RJ-45 Fluke Networks connector P.O. Box 777, Everett, WA USA 98206-0777 Ethernet 10/100BaseT Bite Rate 10 or 100 Mbps Fluke Networks operates in more than 50 countries Interface worldwide. To Ţ nd your local ofŢ ce contact details, go to Connector 8-pin modular jack: RJ-48 www.ţ ukenetworks.com/contact. 2006 Fluke Corporation. All rights reserved. © Modem SpeciŢ cations RJ11 connector, FCC Part 68 and IC-CS03 standards, Printed in U.S.A. 2/2006 2643363 D-ENG-N Rev A compliance in US and Canada