Visual UpTime Select ASE model 807-0105 X.21 i nline probe ASE With LinkSafe capabilities The Visual UpTime® Select™ X.21 LinkSafe™ inline The ASE supports X.21 connectivity through a X.21 Key features probe ASE is deployed inline on an access line, typical- Data Terminal Equipment (DTE) interface on the • Inband management capabilities ly between a CSU/DSU and customer premises equip- network side and Data Communications Equipment ment (CPE). It supports Multi-Protocol software for (DCE) interface on the user side. • LinkSafe technology deployment in standard frame relay or HDLC networks The ASE operates at data rates up to 2.048 Mbps, • Multi-Protocol or IP Transport software and IP Transport software for deployment in frame deriving timing from the network-side and sourcing • Service Level Agreement (SLA) metrics relay or HDLC-based networks that use IP switching. timing on the user side. It also includes LinkSafe • Voice over IP (VoIP) analysis capability technology to protect circuit integrity in case of an • Application analysis capability ASE outage, as well as power failure notiŢ cation. • LMI spooŢ ng • LAN management port • Power loss detection • Realtime events X.21 inline probe model 807-0105 front view X.21 inline probe model model 807-0105 rear view Optional LAN Connection Access Line LAN WAN CSU/DSU Inline ASE CPE Router Visual UpTime Select Server X.21 inline probe model 807-0105 position on network Technical Data What are ASEs? X.21 inline probe ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) Plastic case with internal power supply collection and network performance monitor- Weight 2.10 lbs. ing hardware devices placed on a wide area Data Rate 0 to 2.048 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode RD: Always synchronous with SCR as part of the Visual UpTime Select system, SD: Synchronous with SCT or SCTE which offers in-depth, real-time, and historical o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) visibility into the performance of your o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) applications infrastructure. In the system, Clearance Requirement Minimum of 3” (7.62 cm) space on sides. data gathered by ASEs is stored in the Visual Operating and Storage 10% to 80%, noncondensing Humidity UpTime Select server and displayed and ana- Power Requirements Input 100 to 240 VAC lyzed from the Visual UpTime Select Web client. Frequency 50/60 Hz As a service level management tool, ASEs Input Current Rating 0.5 amps indicate when services are being met, provide X.21 User Interface ConŢ guration DCE for interfacing with DTE warnings when services start to degrade, and (DCE) Data and Clock Leads ITU-CCITT X.21 send alerts when services are not met. Signaling Leads ITU-CCITT X.21 Connector Female 15-pin X.21 connector Hardware Warranties Signaling Indicate: Clear to Send control signal to the user Enhanced Gold, Bronze, and International interface. Received and terminated by the ASE. Gold ASE hardware warranty service programs X.21 Network ConŢ guration DTE for interfacing with DCE are available to help you maximize your Interface (DTE) Data and Clock Leads ITU-CCITT X.21 investment in Visual UpTime Select. For more Signaling Leads ITU-CCITT X.21 detailed warranty information, visit: Connector Female 15-pin X.21 connector www.fl ukenetworks.com/visualcustomercare Signaling Control: Request to Send control signal from the user interface. On while power is applied by the Ordering Information ASE. For more details, please contact your Visual Serial Port Interface Baud Rate 19200 or 9600 bps Parity 8 data bits, no parity UpTime Select authorized reseller or Stop Bit 1 stop bit Fluke Networks Sales at (800) 240-4010 Electrical Format EIA RS-232, DTE or (301) 296-2300. Connector RJ-45 Ethernet 10/100BaseT Bite Rate 10 or 100 Mbps Interface Connector 8-pin modular jack: RJ-48 NETWORK SUPER VISION Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To Ţ nd your local ofŢ ce contact details, go to www.ţ ukenetworks.com/contact. 2006 Fluke Corporation. All rights reserved. © Printed in U.S.A. 2/2006 2643152 D-ENG-N Rev A