FLUKE 807-0115
Features
- Application analysis capability
- Four management ports
- Inband management capability
- LAN management port
- LinkSafe technology
- LMI spoofing
- MLPPP support on IP Transport software
- Power loss detection
- Realtime events
- Service Level Agreement (SLA) metrics
Datasheet
Fluke-807-0115-4xT1-E1-Inline-Probe-ASE-344666708.pdf
94 KiB
Extracted Text
Visual UpTime Select ASE model 807-0115 4xT1/E1 i nline probe ASE With LinkSafe capabilities The Visual UpTime® Select™ 4xT1/E1 inline probe The 4xT1/E1 ASE includes LinkSafe™ technology Key features ASE enhances the data analysis functionality of the to protect circuit integrity in case of a power outage • Four management ports Visual UpTime Select system for enterprises with and it also delivers a notiŢ cation alarm if there is a two-to-four T1 or E1 circuits terminating at a single power failure. • MLPPP support on IP Transport software location. The ASE provides up to 6.176 Mbps Designed for locations with multiple circuits • Inband management capability (T-standard) or 8.192 Mbps (E-standard) of detailed terminating at a single device, the 4xT1/E1 is typi- • LinkSafe technology network trafŢ c analysis and management, while cally deployed as an inline probe between the service • Power loss detection maintaining full wire speed pass-through of all provider’s edge device and the customer’s termination • Service Level Agreement (SLA) metrics trafŢ c. In its initial release, the ASE supports IP equipment. The Ţ gure below highlights the multilink • Application analysis capability Transport software over MultiLink Point-to-Point deployment for the 4xT1/E1 ASE. • LMI spooŢ ng Protocol (MLPPP) T1 links. • LAN management port • Realtime events 4xT1/E1 inline probe model 807-0115 front 4xT1/E1 inline probe model model 807-0115 rear Optional LAN Connection Bundled T1 Line WAN CPE Router 4xT1/E1 inline ASE LAN 4xT1/E1 inline probe model 807-0115 position on network Technical Data What are ASEs? 4xT1/E1 inline probe ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) collection and network performance monitor- Weight 7 lbs. ing hardware devices placed on a wide area Data Rate T1: 1.536 Mbps, E1: 1.984 Mbps network (WAN) or Local Area Network (LAN) Timing Mode Derived externally from the T1 or E1 network, user interface, or internally from the ASE. as part of the Visual UpTime Select system, o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) which offers in-depth, real-time, and historical o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) visibility into the performance of your Clearance Requirement Minimum of 3” (7.62 cm) space on sides. applications infrastructure. In the system, Operating and Storage 10% to 80%, noncondensing data gathered by ASEs is stored in the Visual Humidity UpTime Select server and displayed and ana- Power Requirements Input 100 to 240 VAC lyzed from the Visual UpTime Select Web client. Frequency 50/60 Hz As a service level management tool, ASEs Input Current Rating 0.5 amps T1 Network Interface Line Rate 1.544 Mbps ±50 bps synchronous indicate when services are being met, provide (Ports 1-4) Line Format B8ZS line coding warnings when services start to degrade, and Framing ESF framing formats send alerts when services are not met. Input Signal 0dB to -36dB Hardware Warranties Output Signal 0, -7.5dB, -15dB, -22.5dB LBO Enhanced Gold, Bronze, and International Pulse Density AT&T 62411 Connector 100 ohm 8-pin modular jack—USOC: RJ48C Gold ASE hardware warranty service programs Timing Network or User are available to help you maximize your Channel Selection 1 to 24 channels in any combination investment in Visual UpTime Select. For more E1 Network Interface Line Rate 2.048 Mbps ±102.4 bps synchronous detailed warranty information, visit: (Ports 1-4) Line Format HDB3 line coding www.ţ ukenetworks.com/visualcustomercare Framing CRC4 or FAS framing formats Time Slot 16 CAS, CCS, or Data Ordering Information Input Signal 0dB to -43dB For more details, please contact your Visual Output Signal 0dB UpTime Select authorized reseller or Connector 120 ohm RJ-48C balanced and 75 ohm BNC unbal- Fluke Networks Sales at (800) 240-4010 anced coaxial or (301) 296-2300. Channel Selection 1-31 (includes channel 16) or 1-15, 17-31 (does not include channel 16) Serial Port Interface Baud Rate 19200 or 9600 bps Parity 8 data bits, no parity Stop Bit 1 stop bit Electrical Format EIA RS-232, DTE Connector RJ-45 Ethernet 10/100BaseT Bite Rate 10 or 100 Mbps Interface Connector 8-pin modular jack: RJ-48 NETWORK SUPER VISION Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To Ţ nd your local ofŢ ce contact details, go to www.ţ ukenetworks.com/contact. 2006 Fluke Corporation. All rights reserved. © Printed in U.S.A. 2/2006 2643418 D-ENG-N Rev A
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 807-0115 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods