Visual UpTime Select ASE model 807-0111 T1 CSU/DSU ASE With Modem The Visual UpTime® Select™ T1 CSU/DSU ASE is This ASE features an internal modem that allows Key features deployed on a T1 access line at the demarcation point users to establish a telephone connection to either • Inband management capabilities between the provider network and customer premises. the ASE’s administrative interface or a pass-through It supports full and fractional (FT1) T1 networks and connection through the serial port. • Multi-Protocol or IP Transport software provides connectivity through V.35 interface. In addition to performing standard CSU/DSU • Service Level Agreement (SLA) metrics The ASE supports Multi-Protocol software for deploy- functions—such as BER tests, loopbacks, and power • Drop-and-Insert capabilities through ment in standard frame relay or HDLC networks and failure detection—the ASE is capable of inserting DSX port IP Transport software for deployment in networks that management trafŢ c. • Internal modem use IP switching. • Voice over IP (VoIP) analysis capability • Application analysis capability • LMI spooŢ ng • LAN management port • Power loss detection • Realtime events T1 CSU/DSU model 807-0111 front view T1 CSU/DSU model 807-0111 rear view CSU/DSU ASE T1 Access V.35 Line Line Wide Area Network Modem Optional LAN Visual UpTime Connection Connection Select PBX PBX Server Tl h T1 CSU/DSU model 807-0111 position on network Technical Data What are ASEs? T1 CSU/DSU ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) Plastic case with internal power supply. collection and network performance monitor- Weight 2.10 lbs. ing hardware devices placed on a wide area Data Rate 1.544 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode Derived externally from the T1 network or DSX-1 as part of the Visual UpTime Select system, interface, or internally from the ASE. which offers in-depth, real-time, and historical o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) visibility into the performance of your o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) applications infrastructure. In the system, Clearance Requirement Minimum of 3” (7.62 cm) space on sides. data gathered by ASEs is stored in the Visual Operating and Storage 10% to 90%, noncondensing Humidity UpTime Select server and displayed and ana- Power Requirements Input 100 to 120 VAC lyzed from the Visual UpTime Select Web client. Frequency 50/60 Hz As a service level management tool, ASEs Input Current Rating 0.5 amps indicate when services are being met, provide T1 Network Interface Line Rate 1.544 Mbps ±50 bps synchronous warnings when services start to degrade, and Line Format AMI or B9ZS line coding send alerts when services are not met. Framing ESF or D4 framing formats ESF FDL ANSI T1.403, AT&T TR54016, Both, or None Hardware Warranties Input Signal 0dB to -36dB Enhanced Gold, Bronze, and International Output Signal 0, -7.5dB, -15dB, -22.5dB LBO Gold ASE hardware warranty service programs Pulse Density AT&T 62411 are available to help you maximize your Connector 8-pin modular jack—USOC: RJ48C investment in Visual UpTime Select. For more Timing Loop, DSX-1, or Internal detailed warranty information, visit: Channel Selection 1 to 24 channels in any combination www.fl ukenetworks.com/visualcustomercare Network DTE Interface ConŢ guration DCE for interfacing with DTE (Data Port) Data and Clock Leads ITU-T V.35 Ordering Information Signaling Leads EIA RS-232 (ITU-T V.28) For more details, please contact your Visual Data Rates 56 kbps x N or 64 kbps x N (N = 1 through 24) UpTime Select authorized reseller or HDLC Inversion Selectable V.35 data inversion Fluke Networks Sales at (800) 240-4010 Transmit Timing Basis Network selected-source timing or (301) 296-2300. Receive Timing Basis SCT, inverted SCT, SCTE Receive Line Data Not Valid RLSD, CTS Connector Female 34-pin V.35 connector Serial Port Interface SpeciŢ cations 19200 or 9600 bps baud rate, 8 data bits no parity, 1 stop bit, EIA RS-232 DTE electrical format, RJ-45 connector Ethernet 10/100BaseT Bite Rate 10 or 100 Mbps Interface Connector 8-pin modular jack: RJ-48 Modem Connector RJ11 Standard FCC Part 68 and IC-CS03 NETWORK SUPER VISION Fluke Networks Compliance US and Canada P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To Ţ nd your local ofŢ ce contact details, go to www.ţ ukenetworks.com/contact. 2006 Fluke Corporation. All rights reserved. © Printed in U.S.A. 2/2006 2643374 D-ENG-N Rev A