Visual UpTime Select ASE model 807-0109 T1 CSU/DSU ASE With DSX-1, Drop-and-Insert capabilities The Visual UpTime® Select™ T1 CSU/DSU ASE is In addition to performing standard CSU/DSU Key features deployed on a T1 access line at the demarcation point functions—such as BER tests, loopbacks, and power • Inband management capabilities between the provider network and customer premises. failure detection—the ASE is capable of inserting It supports full and fractional (FT1) T1 networks and management trafŢ c. • Multi-Protocol or IP Transport software provides connectivity through V.35 and additional The ASE’s “drop-and-insert” feature provides a • Service Level Agreement (SLA) metrics digital cross connect signal (DSX-1) interfaces. secondary DSX-1 port that can connect to a Private • Drop-and-Insert capabilities through The ASE supports Multi-Protocol software for deploy- Branch Exchange at a customer’s site. T1 Timeslots DSX port ment in standard frame relay or HDLC networks and can be segmented for a PBX on the same circuit car- • Voice over IP (VoIP) analysis capability IP Transport software for deployment in frame relay or rying data trafŢ c (see Ţ gure). • Application analysis capability HDLC-based networks that use IP switching. • LMI spooŢ ng • LAN management port • Power loss detection • Realtime events T1 CSU/DSU model 807-0109 front view T1 CSU/DSU model 807-0109 rear view CSU/DSU ASE T1 Access V.35 Line Line Wide Area Network Optional LAN Visual PBX Connection UpTime Select PBX Server Telephone Telephone T1 CSU/DSU model 807-0109 position on network Technical Data What are ASEs? T1 CSU/DSU ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) Plastic case with internal power supply. collection and network performance monitor- Weight 2.10 lbs. ing hardware devices placed on a wide area Data Rate 1.544 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode Derived externally from the T1 network or DSX-1 as part of the Visual UpTime Select system, interface, or internally from the ASE. which offers in-depth, real-time, and historical o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) visibility into the performance of your o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) applications infrastructure. In the system, Clearance Requirement Minimum of 3” (7.62 cm) space on sides. data gathered by ASEs is stored in the Visual Operating and Storage 10% to 90%, noncondensing Humidity UpTime Select server and displayed and ana- Power Requirements Input 100 to 120 VAC lyzed from the Visual UpTime Select Web client. Frequency 50/60 Hz As a service level management tool, ASEs Input Current Rating 0.5 amps indicate when services are being met, provide T1 Network Interface Line Rate 1.544 Mbps ±50 bps synchronous warnings when services start to degrade, and Line Format AMI or B9ZS line coding send alerts when services are not met. Framing ESF or D4 framing formats ESF FDL ANSI T1.403, AT&T TR54016, Both, or None Hardware Warranties Input Signal 0dB to -36dB Enhanced Gold, Bronze, and International Output Signal 0, -7.5dB, -15dB, -22.5dB LBO Gold ASE hardware warranty service programs Pulse Density AT&T 62411 are available to help you maximize your Connector 8-pin modular jack—USOC: RJ48C investment in Visual UpTime Select. For more Timing Loop, DSX-1, or Internal detailed warranty information, visit: Channel Selection 1 to 24 channels in any combination www.fl ukenetworks.com/visualcustomercare Network DTE Interface ConŢ guration DCE for interfacing with DTE (Data Port) Data and Clock Leads ITU-T V.35 Ordering Information Signaling Leads EIA RS-232 (ITU-T V.28) For more details, please contact your Visual Data Rates 56 kbps x N or 64 kbps x N (N = 1 through 24) UpTime Select authorized reseller or HDLC Inversion Selectable V.35 data inversion Fluke Networks Sales at (800) 240-4010 Transmit Timing Basis Network selected-source timing or (301) 296-2300. Receive Timing Basis SCT, inverted SCT, SCTE Receive Line Data Not Valid RLSD, CTS Connector Female 34-pin V.35 connector DSX-1 Interface Line Rate 1.544 Mbps ±50 bps Line Format AMI or B8ZS Framing ESF or D4 (SF) Input Signal -1dB to -11dB Line Equalization 0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft Connector RJ-45 Channel Selection 1 to 24 channels in any combination NETWORK SUPER VISION Serial Port Interface SpeciŢ cations 19200 or 9600 bps baud rate, 8 data bits no parity, Fluke Networks 1 stop bit, EIA RS-232 DTE electrical format, RJ-45 P.O. Box 777, Everett, WA USA 98206-0777 connector Fluke Networks operates in more than 50 countries Ethernet 10/100BaseT Bite Rate 10 or 100 Mbps worldwide. To Ţ nd your local ofŢ ce contact details, go to www.ţ ukenetworks.com/contact. Interface Connector 8-pin modular jack: RJ-48 2006 Fluke Corporation. All rights reserved. © Printed in U.S.A. 2/2006 2643395 D-ENG-N Rev A