ASE Model 807-0205 DS3/E3 i nline probe ASE With LinkSafe capabilities The Visual UpTime® Select™ DS3/E3* Key features What are ASEs? LinkSafe™ inline probe ASE complies with ASEs (Analysis Service Elements) are data • Monitor ATM data on DS3 lines Class A standards for countries using DS3 collection and network performance monitor- • IP Transport software access lines and supports digital transmission ing hardware devices placed on a wide area • LinkSafe technology at the DS3 rate of 45 Mbps. This ASE supports network (WAN) or Local Area Network (LAN) • VoIP call monitoring IP Transport software for deployment in ATM- as part of the Visual Performance Management • Application analysis capability based data networks that use IP switching over system, which offers in-depth, real-time, and • LAN management port DS3 physical lines. historical visibility into the performance of • Realtime events your applications infrastructure. Data gathered The DS3/E3 ASE includes LinkSafe technology by ASEs is stored in the Visual Performance to protect circuit integrity in case of an ASE Manager server and displayed and analyzed outage, as well as power failure notification. from the Web portal interface. As a service This ASE is designed for deployment at the net- work demarcation point between a subscriber’s level management tool, ASEs indicate when CPE and the WAN. The figure below shows the services are being met, provide warnings when ASE positioned between a Line Services Unit services start to degrade, and send alerts when and a customer edge router on a DS3 line. services are not met. DS3/E3 Inline Probe ASE Model 807-0205 Technical Data DS3/E3 ASE specifcations General Dimensions 1 EIA unit (1.75”) high x 17” wide rack-mountable chassis Weight 7 lbs. Data Rate up to 45 Mbps synchronous Timing Mode Derived externally from the network. o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) o o o o Storage Temperature -20 to +55 C (-4 to +131 F) Clearance Requirement Minimum of 3” (7.62 cm) space on sides. Operating/Storage Humidity 10% to 90% non-condensing Power Requirements Input 100 to 240 VAC Frequency 50/60 Hz Input Current Rating 1.0 amps nominal Network/User Interface Line Rate 44.736 Mbps Line Coding B3ZS Cell Scrambling On or Off Line Build Out Long = more than 225 feet. Short = 225 feet or less. Connector 4 BNC (75 ohm), Network Tx and Rx, CPE Tx and Rx Impedance Input and Output 75 ohms Pulse Shape Compliant ITU-T recommendation G.703 Framing C-bit or M23 Cell Delineation HEC or PLCP Serial Port Interface Baud Rate 57600, 19200, or 9600 bps Parity 8 data bits, no parity Stop Bit 1 stop bit Electrical Format EIA RS-232, DTE Connector RJ-45 Ethernet 10/100/1000 Bit Rate 10, 100, or 1000 Mbps BaseT Interface Connector RJ-45 Hardware Warranties Enhanced Gold, Bronze, and International Gold ASE hardware warranty service programs are available to help you maximize your investment in Visual Performance Manager. For more detailed warranty information, visit: www.flukenetworks.com/visualcustomercare Ordering Information For more details, please contact your Visual Performance Manager authorized reseller or Fluke Networks Sales at (800) 240-4010 NETWORK SUPER VISION or (301) 296-2300. Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact. 2009 Fluke Corporation. All rights reserved. © Printed in U.S.A. 1/2009 3400952 D-ENG-N Rev A