Visual UpTime Select ASE model 807-0201 E3 i nline probe ASE With LinkSafe capabilities The Visual UpTime® Select™ E3 LinkSafe™ inline The E3 inline probe ASE is designed for deploy- Key features probe ASE complies with Class A standards for ment at the network demarcation point between a  Inband management capabilities countries using E3 ATM lines and supports digital subscriber’s CPE and the WAN. It can be deployed in transmission at the E3 rate of 34 Mbps. This ASE ATM and mixed frame relay-ATM environments. The  LinkSafe technology supports Multi-Protocol software for deployment in fi gure below shows the ASE positioned at the edge of  Multi-Protocol or IP Transport software standard ATM networks and IP Transport software an inter-worked frame relay-to-ATM network, allowing  Service Level Agreement (SLA) metrics for deployment in ATM-based networks that use IP for SLA messaging between a frame relay DLCI and an  Application analysis capability switching. The ASE also includes LinkSafe technology ATM VPI/VCI.  LAN management port to protect circuit integrity in case of an ASE outage,  Realtime events as well as power failure notifi cation. E3 inline probe model 201 front view E3 inline probe model 201 rear view LAN Branch ASEs Visual Frame to ATM UpTime Interworking CPE Select T1 ATM ASE Router server Frame ATM Network Network E3 inline probe model 201 on ATM/Frame network Technical Data What are ASEs? E3 inline probe ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 1 EIA unit (1.75”) high x 19” wide rack-mountable chassis collection and network performance monitor- Weight 10 lbs. ing hardware devices placed on a wide area Data Rate to 34 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode Derived externally from the network. as part of the Visual UpTime Select system, o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) which offers in-depth, real-time, and historical o o o o Storage Temperature -20 to +55 C (-4 to +131 F) visibility into the performance of your Clearance Requirement Minimum of 3” (7.62 cm) space on sides. applications infrastructure. In the system, Operating/Storage Humidity 10% to 90% non-condensing data gathered by ASEs is stored in the Visual Power Requirements Input 100 to 240 VAC UpTime Select server and displayed and ana- Frequency 50/60 Hz lyzed from the Visual UpTime Select Web client. Input Current Rating 0.5 amps As a service level management tool, ASEs Network Interface Line Rate 34.368 Mbps indicate when services are being met, provide Cell Delineation HEC or PLCP warnings when services start to degrade, and Cell Scrambler Enable or Disable send alerts when services are not met. Connector 4 BNC (75 ohm), Network Tx and Rx, CPE Tx and Rx Serial Port Interface Baud Rate 57600, 19200, or 9600 bps Hardware Warranties Parity 8 data bits, no parity Enhanced Gold, Bronze, and International Stop Bit 1 stop bit Gold ASE hardware warranty service programs Electrical Format EIA RS-232, DTE are available to help you maximize your Connector 9-pin D, male per EIA-574 investment in Visual UpTime Select. For more Bite Rate 10 or 100 Mbps Ethernet 10/100BaseT Interface detailed warranty information, visit: Connector 8-pin modular jack: RJ-48 www.ţ ukenetworks.com/visualcustomercare Ordering Information For more details, please contact your Visual UpTime Select authorized reseller or Fluke Networks Sales at (800) 240-4010 or (301) 296-2300. NETWORK SUPER VISION Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To fi nd your local offi ce contact details, go to www.ţ ukenetworks.com/contact. 2006 Fluke Corporation. All rights reserved. © Printed in U.S.A. 2/2006 2643483 D-ENG-N Rev A