Visual UpTime Select ASE model 807-0134 V.35 i nline probe ASE With LinkSafe capabilities The Visual UpTime® Select™ V.35 LinkSafe™ inline The V.35 inline probe ASE supports V.35 connectiv- Key features probe ASE is deployed inline on a T1 access line, ity through a V.35 Data Terminal Equipment (DTE) • Inband management capabilities typically between a CSU/DSU and customer premises interface on the network side and Data Communica- equipment. This ASE supports IP Transport software tions Equipment (DCE) interface on the user side. • LinkSafe technology for deployment in frame relay or HDLC-based networks The ASE operates at data rates up to 2.048 Mbps, • IP Transport software that use IP switching. deriving timing from the network-side and sourcing • Realtime events timing on the user side. It also includes LinkSafe • Service Level Agreement (SLA) metrics technology to protect circuit integrity in case of an • Voice over IP (VoIP) analysis capability ASE outage, as well as power failure notiŢ cation. • Support for IP-based management trafŢ c consolidation • Application analysis capability • LMI spooŢ ng • LAN management port • Power loss detection V.35 inline probe ASE front view V.35 inline probe ASE rear view Optional LAN Connection Access Line LAN WAN CSU/DSU Inline ASE CPE Router Visual Performance Manager Server V.35 inline probe ASE position on network Technical Data What are ASEs? V.35 inline probe ASE specifcations ASEs (Analysis Service Elements) are data General Dimensions 9.75” (24.7 cm) x 8.9” (22.6 cm) x 1.75”(4.4 cm) Metal case with internal power supply collection and network performance monitor- Weight 2.30 lbs. ing hardware devices placed on a wide area Data Rate 0 to 2.048 Mbps synchronous network (WAN) or Local Area Network (LAN) Timing Mode RD: Synchronous with SCR as part of the Visual Performance Management SD: Synchronous with SCT or SCTE (VPM) system, which offers in-depth, real-time, o o o o Environment Operating Temperature 0 to +40 C (+32 to +104 F) and historical visibility into the performance of o o o o Storage Temperature -20 to +55 C (-4 to +131 ×F) your applications infrastructure. Data gathered Clearance Requirement Minimum of 3” (7.62 cm) space on sides. by ASEs is stored in the VPM server and dis- Operating and Storage 10% to 80%, noncondensing Humidity played and analyzed from the Web portal inter- Power Requirements Input 100 to 240 VAC face. As a service level management tool, ASEs Frequency 50/60 Hz indicate when services are being met, provide Input Current Rating 0.5 amps warnings when services start to degrade, and V.35 User Interface ConŢ guration DCE for interfacing with DTE send alerts when services are not met. (DCE) Data and Clock Leads ITU-T V.35 Signaling Leads EIA RS-232 (ITU-T V.28) Hardware Warranties Connector Female 34-pin V.35 connector Enhanced Gold, Bronze, and International Gold Signaling RTS, DTR ASE hardware warranty service programs are V.35 Network ConŢ guration DTE for interfacing with DCE available to help you maximize your invest- Interface Data and Clock Leads ITU-T V.35 ment in Visual Performance Manager. For more (DTE) Signaling Leads EIA RS-232 (ITU-T V.28) detailed warranty information, visit: Connector Female 34-pin V.35 connector www.fl ukenetworks.com/visualcustomercare Signaling CTS, RLSD, DSR Serial Port Interface Baud Rate Selectable up to 19200 bps Ordering Information Parity 8 data bits, no parity For more details, please contact your Visual Stop Bit 1 stop bit Performance Manager authorized reseller or Electrical Format EIA RS-232, DTE Fluke Networks Sales at (800) 240-4010 Connector RJ-45 or (301) 296-2300. Ethernet 10/100BaseT Bit Rate 10 or 100 Mbps Interface Connector 8-pin modular jack: RJ-48 NETWORK SUPER VISION Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To Ţ nd your local ofŢ ce contact details, go to www.ţ ukenetworks.com/contact. 2008 Fluke Corporation. All rights reserved. © Printed in U.S.A. 7/2008 3353842 D-ENG-N Rev A