DIVERSIFIED TECHNOLOGY CPC8610

Description
Diversified Technologies CPC8610 SBC Pentium III to 700MHz, 256MB SODIMM, video, Dual LAN, EIDE & PMC slot
Part Number
CPC8610
Price
Request Quote
Manufacturer
DIVERSIFIED TECHNOLOGY
Lead Time
Request Quote
Category
SINGLE BOARD COMPUTERS
Specifications
BIOS
Phoenix BIOS, SST 4MB Flash and battery backed CMOS RAM; PCI2.1 compliant, PNP1.0A compliant, Intel PXE2.0 Boot ROM, multiboot, thermal management, console redirection, legacy USB
BOARD SIZE
6U x 4HP (233.35 x 160 mm), single slot
Board Type
CompactPCI 6U
BUS INTERFACE
32-bit/33MHz PICMG 2.0 R3.0 CompactPCI
CHIPSET
Intel 440BX with 100MHz FSB support
CPU
one Intel BGA2 Pentium III up to 700MHz, 256KB on-die L2 cache
ETHERNET
Dual 10/100Base-TX, Intel 82559 via rear panel
FD
Support for up to two floppy disk drives
FRONT PANEL CONNECTORS/LEDS
PMC, PS/2 keyboard, PS/2 mouse, video (15-pin), push button reset; power and two Ethernet LEDs
HEADERS
PMC
HW MONITOR
voltages, temperature, CPU fan, and two-stage WDT w/programmable reset interval
MEMORY
Up to 256MB on a 144-pin SODIMM socket
OPERATING TEMP
0 ~ 50oC (32~122oF), depending on processor used
PCI EIDE
Support for two EIDE devices, PIO Mode 4 and Ultra DMA33 (16.67 & 33MB/sec data transfer rates respectively)
PCI-TO-PCI BRIDGE
Intel 21150 drives up to 7 CompactPCI slots
PMC
One 32-bit/33MHz site
POWER CONSUMPTION
10A @+ 5V, 1.8A @ +3.3V,
Processor
Intel Pentium III
RTC
Real time clock with field replaceable lithium battery, accurate to ±13 min/yr, 10-year expected life
RTM (CPI605) HEADERS/CONNECTORS
44-pin EIDE (secondary), two SCSI (68-pin); two Ethernet (RJ-45), system monitor serial (9-pin), USB1, PS/2 KB/Mouse (two 6-pin mini DIN), two serial (two 9-pin), parallel (26-pin), GPIO Block
VIDEO
PCI with 2MB DRAM
Features
- 32-bit PCI-to-PCI bridge drives up to 7 CompactPCI slots
- Dual 10/100Baset-TX NICs
- EIDE & PCI video
- Intel 440BX chipset supports 100 FSB
- Low Power Pentium III processor to 700MHz
- PMC site
- Up to 256MB SODIMM w/ECC
Datasheet
Extracted Text
CompactPCI Single Board Computer CPC8610 • Embedded Intel Pentium III BGA2 Processor up to 700 MHz • Intel 440BX Chipset with 100MHz FSB • 32-bit / 33MHz PCI Bus • Up to 256 MB of SDRAM • PCI Video • Dual PCI 10/100 Base-TX t A ID• PCI Enhanced Ultra E r , 2 Serial, and• 2 Floppy 1 Parallel Port • Rear USB Port • System Monitor : PROCESSORY The CPC8610 supports up to 128MB of system memoryINTEL Embedded Pentium III (BGA2) with support for using one standard 144-pin PC-100 SDRAM SODIMM. 100MHz front side bus speeds. The BIOS automatically sizes and configures the memory for optimal performance.Y 1 bank of 72 bit (144 pin) SODIMM, up to 128MB of CACHE SDRAM, with ECC Support In addition to the 16KB of primary (L1) cache, a 128KB secondary (L2) on-die cache is integrated into the CACHE Embedded Pentium III (BGA2) processor 16KB L1, 128KB L2 integrated on-die ICOMBUSPCI BUS SPEED The CPC8610 provides direct support for up to 7, expan-32 Bit / 33MHz PCI Bus Speed sion CompactPCI slots. Each of these slots provide support BIOSfor PCI mastering devices. DTI Enhanced PHOENIX BIOS, Plug-n-Play compliant SYSTEM MONITOR PCI IDEThe CPC8610 includes LM87 hardware system monitor. EIDE support, PIO modes 0 to 4, bootable CD-ROM usingThis System Monitor monitors CPU temperatures and CPU rear panel I/O CPI606fan speeds. The System Monitor also monitors all the system critical voltages PCI ETHERNET Dual 10/100 Base-T auto-negotiating Intel 82559 I/O ControllersAll CPC8610 I/O connections are routed to the P4 and P5 connectors for connection to DTI’s rearpanel I/O board, PCI VIDEO the CPI606. C&T 69000 with 2MB integrated video memory using rear panel I/O CPI606 PHYSICAL 6U size board (160mm x 233.35mm), 4Hr. Support foPB rear-panel I/O connections using DTI’s CPI606 rear-panelUHCI compatible host controller port support for I/O module.rear USB port using rear panel I/O CPI606. PMC SITE Support for one PCI Mezzanie Site REAL TIME CLOCK Includes 114 bytes CMOS RAM with long life battery m 0 7 March 2002 1.800.443.266 Rev. 1. www.dtims.co US PACT PC MEMOR MEMOR SPECIFICATIONS Controlle AT Etherne CPC8610 CompactPCI Single Board Computer SODIMM C&T 69000 National Dual Socket PCI Video Super I/O Intel 82559 CPI606 Controller Ethernet Floppy Dual 10/100 Controller Connector Base-T Ethernet DMC Site VGA Video/Port IDE Connector DTI Enhanced Phoenix Flash System Monitor BIOS Power LED Serial Port ENET 1 LED USB Port ENET 2 LED PS/2 Keyboard Intel 21150 PCI Keyboard Port and Mouse Ports Transparent Bridge Ultra-Wide Mouse Port SCSI B Connector Dual Serial Port PCI Video Port Parallel Port RTC Battery Embedded Intel 440BX GPIO Block Port Reset Switch Pentium III Processor Chipset CPC8610 The CPC8610 is a single board computer7provides desktop graphics with full feature designed to fit into a single cPCI system slot.for monitoring of system critical variableshigh end performance up to extended VGA The CPC8610 features the latest Intel CPU,like voltage, temperature, and CPU fan oper-mode. the Embedded Pentium III (BGA2), in aThe CPC8610 is designed for operation in CompactPCI form factor. The CPC8610 isA PCI EIDE controller on the CPC8610CompactPCI passive backplane systems. For dgives excellent performance with all highcompletely cableless chassis, all CPC8610 144-pin SODIMM socket is provided to sup-speed IDE drives and also supports 32-bitI/O connections are routed to the P4 and P5 M lconnectors for connection to DTI sizes from 1MB x 72 to 32MB x 72 are sup-The CPC8610 incorporates a single PMCI/O board, the CPI606. DTI offers several ported, giving a memory range from 8MB toSite. The PMC Site is used for adding addi-CompactPCI backplane choices. Call facto- 128MB. SDRAM memory is supported.tional peripheral interfaces to the CPC8610.ry for details. Single-bit error correction (ECC) is availableThe PMC Site is connected to the host PCI using standard parity SODIMMs.Bus and operates at 32 Bit / 33 MHz. Dual Intel 82559 Ethernet controllers areStandard ISA bus periphals like a PS/2 key- integrated onboard. This PCI ethernet inter-board/mouse controller, Real Time Clock, face provides a fully auto-negotiating 10floppy controller, RS-232 serial ports, All products are shipped FOB factory (MS).Base-T / 100 Base-TX connection over stan-ECP/EPP parallel port and field upgradable Specifications subject to change without notice. dard UTP-5 data grade twisted-pair cable upFlash BIOS are also integrated onto the Trademarks are the property of their respective owners. to 100 meters in length. Support is provided Copyright 2001 by Diversified . for full duplex operation, allowing effectiveThe CPC8610 provides enhanced 3DAll rights reserved. data rates to reach 20 Mbps and 200 Mbps,graphics performance by utilizing a C&T . respectively69000 video controller. The video controller For more information or to orde.r, please contact us mww 7 476 Highland Colony Parkway • Ridgeland, MS 39157 1.800.443.266 w.dtims.co Technology CPC8610. ’s rear-paneaccess, LBA mode, and bootable CD-ROM’s. port up to 128MB of system memory. DIM based on Intel’s 440BX chipset. One standar ation. The CPC8610 also features National LM8
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the CPC8610 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Diversified Technology cPB-4325 PICMG 2.16 Pentium III, serverworks LE-T chipset, PCI video, 2x Gbe ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods