2.16 PSB / 2.17 StarFabric Processor Blade cPB-4311 ® ® • Intel 700MHz Pentium III Processor-M, 256KB L2 cache ® • Intel 440GX Chipset with 100MHz FSB • Up to 512MB ECC SDRAM • PCI Video with 2MB SDRAM • Two Fast Ethernet Interfaces and PMC Site • Two StarFabric Links • Optional Onboard 2.5" Ultra DMA/33 EIDE Drive • 6U x 4HP, Operates in System or Peripheral Slots ® • PICMG 2.16, 2.17, and 2.1 R2.0 Compliant ® ® Diversified Technology's low cost cPB-4311 CompactPCI processor blade, compliant with the PICMG 2.16 packet switched backplane (PSB), 2.17 StarFabric, and hot-swap open standards, addresses the low cost, low power processing needs of Internet, telecom and industrial control applications. ® ® The cPB-4311 comes with a low power, 700MHz Intel Pentium III processor with 256KB L2 cache, 440GX chipset with 100MHz front side bus, and up to 512MB ECC SDRAM. Onboard are two 10/100Mbits/sec Ethernet auto-nego- tiating controllers, optional Ultra DMA/33 IDE hard drive, 32-bit/33MHz PMC site, PS/2 keyboard and mouse inter- faces, Universal Serial Bus (USB), serial and parallel ports, floppy interface and a SVGA CRT controller. A StarGen SG2010 bridge provides links to dual StarFabric meshes whereas the two Ethernet controllers provide the links to the TM 2.16 PSB. An IDE-compatible CompactFlash carrier is available on the optional cRT-4311 rear I/O transition mod- ule. The cPB-4311 does not have a PCI bridge to the CompactPCI backplane. As such, it can be used in either system or peripheral slots of a CompactPCI platform. The cPB-4311 supports being hot-swapped and automatically performs proper operating system shutdown upon opening of the ejector latch (requires ACPI compliant operating system). Part of DTI's PlexSys family of CompactPCI PSB products, the cPB-4311 operates in PICMG 2.16-compliant systems. Also included are a system monitor (voltages and CPU/board temperature) and a 2-year limited warranty. Low cost and standards-based, Diversified Technology's cPB-4311 system/peripheral processor blade is the unique choice for application developers addressing embedded clustering and media gateway markets. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev. 1.2 July 2003 All trademarks and tradenames are the property of their respective owners. cPB-4311 2.16 PSB / 2.17 StarFabric Processor Blade SPECIFICATIONS CPU / Cache Mechanical • Intel Low Power (BGA2) Pentium III at 700MHz • 9.2” x 6.3” x 0.8” (233.35 mm x 160 mm x 20.32 mm) • 32KB internal L1 cache; 256KB 64-bit on-die L2 Cache • 6U x 4HP • Intel 440GX Chipset • Conforms to PICMG 2.0 R3.0 (Core), 2.1 R2.0 (Hot Swap), 2.16 R1.0 (PSB), and 2.17 R1.0 (StarFabric) Specifications Bus Interface • 100MHz Front Side Bus Power Requirements • Supports onboard 32-bit/33MHz PMC card Input Power 24W ICC typ. * +5V 3.0A Memory +12V 10mA • One 168-pin right-angled socket for up to 512MB registered PC100 +3.3V 2.6A ECC SDRAM *Measured with 700MHz CPU and 512MB memory Data Path Environmental • 64-bit/100MHz on CPU and memory bus Operating • 32-bit/33MHz on onboard PCI bus • Temperature: 0° to 50°C / 32° to 122°F • StarGen SG2010 dual mesh StarFabric bridge • Humidity (RNC): 5 to 95% @ 40°C / 104°F • Altitude: 4,572m / 15,000ft Flash Memory • Shock: TBD • 4Mb (512KB) Sector Flash for BIOS field upgrade • Vibration: TBD Peripherals & I/O Interface Storage and Transit (w/HD) • Optional 2.5" EIDE drive mounted on board • Temperature: -40° to +65°C / -40° to 149°F • Optional CompactFlash Type II drive carrier on rear I/O module • Humidity (RNC): 0 to 95% @ 40°C / 104°F • 32-bit/33MHz IEEE P1386.1 PMC socket • Altitude: 15,240m / 50,000ft • Hot Swap LED on front panel • Shock: TBD • Vibration: TBD I/O Interface Front Panel Rear Panel Reliability & Serviceability COM 1 N/A J3 • MTBF: 14.6 years COM 2 N/A J4 • MTTR: 3 minutes, plus system startup (hot swap system) LPT 1 N/A J4 • SMBIOS serial number USB 0 N/A J4 • 2 year limited warranty USB 1 4-pin USB N/A SVGA 15-pin D-shell N/A Regulatory Compliance (currently pending) PS/2 K/M 6-pin combo J4 • CE Certification Primary EIDE 2.5" HD (50-pin) N/A • Safety: UL/cUL 60950; EN/IEC 60950; CB Report Ethernet A N/A J3 Scheme CB Certificate and Report Ethernet B N/A J3 • EMC/EMI: FCC 47 CFR Part 15, Subpart B, Class A; Secondary EIDE N/A J4 EN55022, EN50081-1/CISPR22; EN55024 Ordering Information * Note: J4 is not available if cPB-4311 is to be used in H.110 slot. cPB-4311/700 2.16 Processor Blade with 700MHz Pentium III processor Clock / Calendar cPB-4311/700-T • Real-time clock with 256 byte battery backup CMOS RAM 2.16/2.17 Processor Blade with 700MHz Pentium III processor without J4 Supervisory connector • System monitor (LM87): voltages, CPU/board temperatures Options Interoperability cRT-4311P 6U x 4HP Rear I/O Transition Module for PSB backplanes • Validated to operate in PICMG 2.16-compliant and 2.17-compliant cRT-4311 6U x 4HP Rear I/O Transition Module for non-PSB backplanes system platforms PC100 ECC SDRAM • DTI's cSB-4240 24-port level 2/3 Ethernet Switch Blade 2.5" EIDE HD • 3rd party CompactPCI PSB products CompactFlash media Cables OS Compatibility ® TM ® • General: Windows 2000/XP/NT; Red Hat/MontaVista Linux ; TM ® ® Solaris 7/8;UnixWare 2.1.1/7.1.1; QNX BIOS • Phoenix core; PCI 2.1, ACPI Rev 1.0b and SMBIOS 2.3 compliant All products are shipped FOB factory (MS). • Serial console redirection, peripheral enable/disable, quick/multi- boot, Specifications subject to change without notice. PXE 2.0 boot from ROM Trademarks are the property of their respective owners. • Software enable/disable of onboard Ethernet, 2.17 link disable • Legacy USB support (C) Copyright 2003 by Diversified Technology. • Advanced thermal management All rights reserved. For more information or to order, please contact us. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157