2.16 High-density System/Peripheral Processor Blade cPB-4325 ® ® • Single/Dual Intel 933MHz Pentium III Processor with 512KB L2 Cache TM • ServerWorks LE-T Chipset with 133MHz FSB • Up to 1GB ECC SDRAM • PCI Video with 2 MB SDRAM • Two Gigabit & One Fast Ethernet Interfaces • Optional Onboard 2.5" Ultra DMA/33 TM EIDE Drive or CompactFlash Drive Carrier • 6U x 4HP, Operates as System or Peripheral Processor • Optional Mezzanine I/O Expansion Card with Dual PMC & Dual Fibre Channel Interfaces and Backplane Bridge ® • PICMG 2.16, 2.1 R2.0 and 2.9 R1.0 Compliant TM Diversified Technology's cPB-4325 high-density, high-performance, hot swappable CompactPCI processor blade, compliant with the PICMG 2.16 packet switched backplane (PSB) open standard and offers exceptional processing power, high availability and I/O expansion for carrier-grade telecom/Internet and other mission critical applications. The cPB-4325 comes with one or two low power, 933MHz Intel Pentium III processors with 512KB L2 caches installed for optimum performance in uniprocessing or symmetric multiprocessing systems in a single CompactPCI slot. The ServerWorks LE-T chipset, with 133MHz FSB, supports up to 1GB ECC SDRAM and either five slots @ 64-bit/66MHz or seven slots @ 64-bit/33MHz. Onboard are two 10/100/1000Mbits/sec Ethernet auto-negotiating controllers, one 10/100Mbits/sec Ethernet controller, optional Ultra DMA/33 IDE hard drive or CompactFlash disk, PS/2 keyboard/mouse interface, Universal Serial Bus (USB) and serial ports, floppy interface and a SVGA CRT controller. An optional mezzanine card provides dual 64-bit/66MHz PMC sites, dual Fibre Channel interfaces and bus-segment bridging at 33 or 66MHz for up to seven additional slots. Functioning as a System Master processor blade in a CompactPCI multiprocessing system, the cPB-4325 supports hosting of hot swap peripherals. Optionally, it may operate in a peripheral slot, where it receives power but does not communicate on the CompactPCI bus. Part of DTI's PlexSys family of PSB products, the cPB-4325 operates in a PICMG 2.16-compliant system such as the DTI cPS-4081 4U general purpose, carrier grade computing platform and cSB-4240 Ethernet level 2/3 switch. The IPMI 1.5-com- pliant Baseboard Management Controller (BMC), when used with the eCM-3401 chassis management module supports a comprehensive, protected lights-out management scheme. Also included is a programmable two-stage watchdog timer for enhanced system reliability and a 2-year limited warranty. High performance. High availability. I/O and bus expandability. Diversified Technology's cPB-4325 system/peripheral, dense processor blade is the right choice for application developers addressing high performance, carrier-grade Telecom and Internet IP-based markets such as VPN switchers, media gateways, 2.5G/3G wireless, server clusters, IP DSLAM and voice/video/data servers. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev. 1.4 January 2004 All trademarks and tradenames are the property of their respective owners. cPB-4325 2.16 High-density System/Peripheral Processor Blade SPECIFICATIONS CPU / Cache / Chipset Mechanical • Single/Dual Intel Low Voltage Pentium III at 933MHz • 9.2” x 6.3” x 0.8” (233.35 mm x 160 mm x 20.32 mm) • 32KB internal L1 cache; 512KB 64-bit on-die L2 Cache • 6U x 4HP • ServerWorks LE-T • Conforms to PICMG 2.0 R3.0 (Core), 2.1 R2.0 (Hot Swap), 2.9 R1.0 (System Management) and 2.16 Bus Interface R1.0 (PSB) specifications • 133MHz Front Side Bus; 64-bit/33-66 MHz CompactPCI Bus interface • 3.3V or 5V V(I/O) CompactPCI signaling as host or peripheral processor Power Requirements • Supports mezzanine card with dual 64-bit/66MHz 3.3V PMC cards, dual Fibre Max Power Dissipation 43.2W Channel Interfaces and 64-bit/33MHz bridge ICC typ. * +5V 1.8-3.4A +12V 10mA Memory +3.3V 3.9A • One 168-pin right-angled socket for up to 1GB registered PC133 ECC 3.3V SDRAM *Measured with 1-2 933MHz CPU and 1GB memory Data Path Environmental • 64-bit/133MHz on CPU and memory bus Operating • 64-bit/66-33MHz on off-board CompactPCI bus; 64-bit/66MHz on onboard PCI bus • Temperature: 0° to 45°C / 32° to 113°F (w/ 250LFM) • Intel 21154-BE PCI-to-PCI bridge • Humidity (RNC): < 95% @ 40°C / 104°F Flash Memory • Altitude: 4,572m / 15,000ft • 15MB Flash: 1MB for BIOS, 14MB for user • Shock: Trapezoidal, 50G, 170 inches/sec • 512KB EPROM BIOS recovery module • Vibration: 5-500Hz @ 3.13g RMS random Storage and Transit (w/HD) Peripherals & I/O Interface • Temperature: -40° to +85°C / -40° to 185°F • Optional 2.5" EIDE drive or CompactFlash carrier • Humidity (RNC): < 95% @ 40°C / 104°F • PCI video with 2MB memory • Altitude: 15,240m / 50,000ft • Front panel & rear port push button reset • Shock: Free Fall 36” • Reset, IDE, two user-defined, System Health and Hot Swap LEDs on front panel • Vibration: 5-500Hz @ 3.13g RMS random I/O Interface Front Panel Rear Panel Reliability & Serviceability COM 1 RJ-45 J5 • MTBF: 25.6 years COM 2 N/A J5 • MTTR: 3 minutes, plus system startup (hot swap system) USB 0 4-pin USB J5 • Silicon serial number USB 1 N/A J5 • 2 year limited warranty USB 2 N/A J5 Regulatory Compliance SVGA 15-pin D-shell J5 • Designed for NEBS level-3 and /ETSI installations PS/2 K/M 6-pin J5 • CE Certification Floppy N/A J5 • Safety: UL/cUL 60950; EN/IEC 60950; CB Report EIDE 2.5" HD (44-pin) J5 Scheme CB Certificate and Report GB Ethernet A RJ-45 J3 • EMC/EMI: FCC 47 CFR Part 15, Subpart B, Class B; GB Ethernet B RJ-45 J3 EN55022, EN50081-1/CISPR22; Bellcore GR-1089; 10/100 Ethernet RJ-45 J5 EN55024 AT Speaker N/A J5 Ordering Information Clock / Calendar cPB-4325/933 • Real-time clock with 256 byte battery backup CMOS RAM 2.16 Processor Blade with single 933MHz Pentium III Supervisory processor • Two-stage programmable watchdog timer drives NMI or "INIT" on 1st stage, cPB-4325/D933 hardware reset on 2nd stage 2.16 Processor Blade with dual 933MHz Pentium III • IPMI-based (1.5 compliant) 2.9-compliant Baseboard Management processors Controller (BMC); 6 SMBuses Options Interoperability PC133 SDRAM • Validated to operate in a PICMG 2.16-compliant system platform such as 2.5" IDE HD or CompactFlash disk DTI's cPS-4081 cMC-4325 mezzanine card, occupies additional slot • DTI's cCM-3401 star topology Chassis Management Module cRT-455P 6U x 4HP Rear I/O Transition Module • DTI's cSB-4240 24-port level 2/3 Ethernet Switch Blade • 3rd party CompactPCI PSB products OS Compatibility ® ® ® • Windows 2000 Server; Windows XP Server; Red Hat Linux (version 7.2 or higher); VxWorks (Single CPU only) All products are shipped FOB factory (MS). Specifications subject to change without notice. BIOS Trademarks are the property of their respective owners. • AMI Core (C) Copyright 2003 by Diversified Technology. • Console redirection, PXE 2.0 option ROM All rights reserved. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158