DIVERSIFIED TECHNOLOGY cPB-4321
Specifications
BIOS
Pheonix core, Console redirection, PXE 2.0 option ROM
Board Type
CompactPCI
Bus Interface
100MHz Front Side Bus; 64-bit/33 MHz CompactPCI Bus interface, 5V V(I/O) CompactPCI signaling as host, 3.3V or 5V V(I/O) as peripheral processor, Supports onboard 32-bit/33MHz 3.3V PMC card
Cache
32KB internal L1 cache; 256KB 64-bit on-die L2 Cache
Chipset
Intel 440GX
Clock / Calendar
Real-time clock with 256 byte battery backup CMOS RAM
Cpu
Intel Low Power (BGA2) Pentium III at 1GHz
Data Path
64-bit/100MHz on CPU and memory bus, 64-bit/33MHz on off-board CompactPCI bus; 32-bit/33MHz on onboard PCI bus, Intel 21154 PCI-to-PCI bridge,
Flash Memory
4MB Flash: 1MB for BIOS, 3MB for user, 512KB EPROM BIOS recovery module,
hardware reset on 2nd stage
IPMI-based (1.0 compliant) 2.9-compliant Baseboard Management Controller (BMC)
Interoperability
Validated to operate in a PICMG 2.16-compliant system platform such as DTI's cPS-4081, DTI's cCM-3401 star topology Chassis Management Module, DTI's cSB-4240 24-port level 2/3 Ethernet Switch Blade, 3rd party PSB products
Memory
Configured with either 512MB or 1GB 72-bit registered PC100 3.3V ECC SDRAM
OS Compatibility
General: PC-compatible, Enhanced: Windows®2000; Linux; VxWorks
Peripherals & I/O Interface
Optional 20GB 2.5" EIDE drive mounted on board, or CompactFlash, Type II drive carrier, 32-bit/33MHz IEEE P1386.1 PMC socket Front panel & rear port push button reset, Two IDE, System Health and Hot Swap LEDs on front panel
Processor
Intel Pentium III
Supervisory
Two-stage programmable watchdog timer drives NMI or "INIT" on 1st stage,
Features
- 512MB or 1GB ECC SDRAM
- 6U x 4HP, Operates as System or Peripheral Processor
- Intel® 1GHz Pentium® III Processor-M, 256KB L2 Cache
- Intel® 440GX Chipset with 100MHz FSB
- Onboard 2.5" Ultra DMA/33 EIDE Drive, Optional CompactFlash Support
- PCI Video with 2MB SDRAM
- Two Fast Ethernet Interfaces & PMC Site
Datasheet
Extracted Text
2.16 PSB System/Peripheral Processor Blade cPB-4321 ® ® • Intel 1GHz Pentium III Processor-M, 256KB L2 Cache ® • Intel 440GX Chipset with 100MHz FSB • 512MB or 1GB ECC SDRAM • PCI Video with 2MB SDRAM • Two Fast Ethernet Interfaces & PMC Site • Onboard 2.5" Ultra DMA/33 EIDE TM Drive, Optional CompactFlash Support • 6U x 4HP, Operates as System or Peripheral Processor ® • PICMG 2.16, 2.1 R2.0 and 2.9 R1.0 Compliant TM Diversified Technology's modular cPB-4321 hot-swap CompactPCI processor blade, compliant with the PICMG 2.16 packet switched backplane (PSB) open standard, offers superb value with a feature set optimized for Internet, telecom and industrial control applications. The cPB-4321 comes with a low power, 1GHz Intel Pentium III processor with 256KB L2 cache, 440GX chipset with 100MHz front side bus, and either 512MB or 1GB ECC SDRAM. Onboard are two 10/100Mbits/sec Ethernet auto- negotiating controllers, Ultra DMA/33 IDE hard drive, 32-bit/33MHz PMC site, PS/2 keyboard and mouse interfaces, Universal Serial Bus (USB) and serial ports, floppy interface and a SVGA CRT controller. An optional CD-ROM drive mezzanine card facilitates software installation; an optional IDE-compatible CompactFlash carrier card is available. As a System Master processor blade in a CompactPCI multiprocessing system, the cPB-4321 interfaces to the back- plane through a transparent PCI-to-PCI bridge allowing it to communicate directly with all peripheral CPU boards in the system via the CompactPCI bus. Optionally, it may operate in a peripheral slot, where it receives power but does not communicate on the CompactPCI bus. Part of DTI's PlexSys family of PSB products, the cPB-4321 operates in a PICMG 2.16-compliant system such as DTI's cPS-4081 4U general purpose, carrier grade computing platform with cSB-4240 Ethernet level 2/3 switch. The IPMI 1.0-compliant Baseboard Management Controller (BMC), when used with the cCM-3401 chassis management module supports a comprehensive, protected lights-out management scheme. Also included is a programmable two- stage watchdog timer for enhanced system reliability and a 2-year limited warranty. Modular and standards-based, Diversified Technology's cPB-4321 system/peripheral processor blade is the high- value choice for application developers addressing high performance industrial, Telecom and Internet IP-based mar- kets such as VPN switchers, media gateways, 2.5G/3G wireless, server clusters, IP DSLAM and voice/video/data servers. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev. 1.2 July 2003 All trademarks and tradenames are the property of their respective owners. cPB-4321 2.16 PSB System/Peripheral Processor Blade SPECIFICATIONS CPU / Cache / Chipset Mechanical • 9.2 in. x 6.3 in. 0.8 in. (233.35 mm x 160 mm x 20.32 mm) • Intel Low Power (BGA2) Pentium III at 1GHz • 6U x 4HP • 32KB internal L1 cache; 256KB 64-bit on-die L2 Cache • Intel 440GX • Conforms to PICMG 2.0 R3.0 (Core), 2.1 R2.0 (Hot Swap), 2.3 (PMC I/O), 2.12 (SW interoperability), 2.12 (PTMC), Bus Interface 2.9 R1.0 (System Management) and 2.16 R1.0 (PSB) • 100MHz Front Side Bus; 64-bit/33 MHz CompactPCI Bus interface specifications • 5V V(I/O) CompactPCI signaling as host, 3.3V or 5V V(I/O) as peripheral processor Power Requirements • Supports onboard 32-bit/33MHz 3.3V PMC card Max Power Dissipation 42.2W Memory ICC typ. *+5V 4A • Configured with either 512MB or 1GB 72-bit registered PC100 3.3V ECC SDRAM +12V 20mA Data Path +3.3V 6A • 64-bit/100MHz on CPU and memory bus *Measured with 1GHz CPU and 512MB memory • 64-bit/33MHz on off-board CompactPCI bus; 32-bit/33MHz on onboard PCI bus Environmental • Intel 21154 PCI-to-PCI bridge Operating • Temperature: 0° to 50°C / 32° to 122°F (w/ 200LFM) Flash Memory • Humidity (RNC): < 95% @ 40°C / 104°F • 4MB Flash: 1MB for BIOS, 3MB for user • Altitude: 4,572m / 15,000ft • 512KB EPROM BIOS recovery module • Shock: Trapezoidal, 50G, 170 inches/sec Peripherals & I/O Interface • Vibration: 5-500Hz @ 3.13g RMS Random • Optional 20GB 2.5" EIDE drive mounted on board, or CompactFlash Storage and Transit (w/HD) Type II drive carrier • Temperature: -40° to +65°C / -40° to 149°F (w/ HD) • 32-bit/33MHz IEEE P1386.1 PMC socket • Humidity (RNC): < 95% @ 40°C / 104°F • Front panel & rear port push button reset • Altitude: 15,240m / 50,000ft • Two IDE, System Health and Hot Swap LEDs on front panel • Shock: Free Fall 36” I/O Interface Front Panel Rear Panel • Vibration: 5-500Hz @ 3.13g RMS Random COM 1 RJ-45 J5 Reliability & Serviceability COM 2 N/A J5 • MTBF: 14.6 years USB 0 4-pin USB J5* • MTTR: 3 minutes, plus system startup (hot-swap system) USB 1 4-pin USB J5* • Silicon serial number SVGA 15-pin D-shell J5 • 2 year limited warranty PS/2 Keyboard N/A J5 Regulatory Compliance PS/2 Mouse N/A J5 • NEBS compliant Floppy N/A J5 • CE Certification EIDE 2.5" HD (44-pin) J5 • Safety: UL/cUL 60950; EN/IEC 60950; CB Report Ethernet A RJ-45 J3 Scheme CB Certificate and Report Ethernet B RJ-45 J3 • EMC/EMI: FCC 47 CFR Part 15, Subpart B, Class B; AT Speaker N/A J5 EN55022, EN50081-1/CISPR22; Bellcore GR-1089; *Custom configurations only EN55024 Clock / Calendar Ordering Information • Real-time clock with 256 byte battery backup CMOS RAM cPB-4321/1000-A 2.16 Processor Blade with 1GHz Pentium III processor, 512MB Supervisory ECC SDRAM and EIDE hard drive • Two-stage programmable watchdog timer drives NMI or "INIT" on 1st stage, cPB-4321/1000-B hardware reset on 2nd stage 2.16 Processor Blade with 1GHz Pentium III processor, 1GB • IPMI-based (1.0 compliant) 2.9-compliant Baseboard Management Controller (BMC) ECC SDRAM and EIDE hard drive Interoperability cPB-4321/1000-C • Validated to operate in a PICMG 2.16-compliant system platform such as 2.16 Processor Blade with 1GHz Pentium III processor, 1GB DTI's cPS-4081 ECC SDRAM, EIDE hard drive, and CD-ROM mezzanine card. • DTI's cCM-3401 star topology Chassis Management Module Occupies 2 Slots • DTI's cSB-4240 24-port level 2/3 Ethernet Switch Blade Options • 3rd party PSB products cRT-455P 6U x 4HP Rear I/O Transition Module IDE CompactFlash Carrier and media OS Compatibility • General: PC-compatible ® ® ® • Enhanced: Windows 2000; Linux ; VxWorks BIOS All products are shipped FOB factory (MS). • Phoenix core Specifications subject to change without notice. • Console redirection, PXE 2.0 option ROM Trademarks are the property of their respective owners. (C) Copyright 2003 by Diversified Technology. All rights reserved. For more information or to order, please contact us. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the cPB-4321 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Diversified Technology cPB-4325 PICMG 2.16 Pentium III, serverworks LE-T chipset, PCI video, 2x Gbe ...

Diversified Technology CPC8629 SBC w/ single/dual Pentium III, video, dual Ethernet, EIDE, dual chan...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods