MVME5500 Series VMEbus Single-Board Computer Front page The Emerson Network Power MVME5500 series is designed to meet the needs of The MVME5500 is the OEMs including those in defense and aerospace, industrial automation and medical flagship of our VME product imaging market segments. Customers looking for a technology refresh for their line that enables higher levels application while maintaining backward compatibility with their existing VMEbus of performance in a single infrastructure can upgrade to the MVME5500 series and take advantage of the VMEbus slot enhanced performance features. Interior page ® n MPC7457 PowerPC processor The MVME5500 utilizes the MPC7457 processor running at 1 GHz, which is ideal for at 1 GHz data intensive applications. The MVME5500 provides more than just better processor n 512KB of on-chip L2 cache and performance; it also provides balanced performance from the processor, memory, dual independent local buses and I/O subsystems. 2MB of L3 cache n AltiVec coprocessor for high- The powerful Marvell system controller, with support for a 133 MHz host bus and performance computational a 133 MHz SDRAM memory bus, is well matched to the high speed processor. To applications match the system I/O to the outstanding processor performance, the MVME5500 n 512MB of on-board 133 MHz provides dual 64-bit, 33/66 MHz PCI buses. Each PCI bus has a PMC site supporting SDRAM ECC memory and cards running at 33 or 66 MHz. The Universe II VME interface and PMCspan connec- 512MB additional memory via tor are isolated from the PMC sites on a dedicated 33 MHz PCI bus segment so that a memory mezzanine card for a both PMC sites are capable of 66 MHz operation. total of 1GB of memory The MVME5500 also offers a Gigabit Ethernet interface, a 10/100BaseTX Ethernet n Two banks of soldered flash interface and two serial ports. All of this adds up to a set of well-balanced, memory (32MB and 8MB) high-performance subsystems for unparalleled performance. n Dual independent 64-bit PCI buses and PMC sites with a bus speed of up to 66 MHz n Gigabit Ethernet interface plus an additional 10/100BaseTX Ethernet interface n 64-bit PCI expansion mezzanine connector allowing up to four more PMCs n I/O compatibility with MVME51xx family n Single VME slot even when fully configured with two PMC mod- ules or one PMC module and an add-on memory mezzanine n Support for processor PMCs (PrPMCs) Front page Interior page MVME5500 Block Diagram SDRRAM L3 Cache COM1 COM2 Mezzanine 2MB FP I/O Planar 512MB Battery Flash 32MB SDRRAM NVRAM EIA232 EIA232 (soldered) MPC7457 133 MHz RTC 8MB 1 GHz 512 MB (soldered) UART UART PCI Bridge & A32/D64-bit, 133 MHz Memory Controller 66 MHz PCI Local Bus Discovery – A32/D64-bit PCI Gigabit 66 MHz PCI Local Bus Bridge Ethernet – A32/D64-bit Controller 33 MHz PCI Local Bus – A32/D64-bit Ethernet PMC IPMC 10/100BaseTX Port 1 Slot 2 Slot 1 PHY PMCspan 10/100/1000 Connector BaseTX Universe II FP I/O PMC PMC FP I/O FP I/O Port 2 10/100BaseTX P2 P1 FP I/O Backwards Compatibility n One single-ended Ultra Wide SCSI port n One parallel port The MVME5500 continues the direction that Emerson started with the MVME5100 series of providing a n Four serial ports (two or three async and one or two migration path from Emerson’s embedded controllers sync/async, depending on module) and single-board computers (SBCs) to a single With an IPMC installed, one PMC slot is still available, platform. This migration path enables OEMs to providing support for OEM product customization. support varying I/O requirements with the same base platform, simplifying part number maintenance, P2 I/o ModES technical expertise requirements and sparing. The MVME5500 series supports two, jumper-configurable P2 I/O modes: PMC mode and IPMC mode. PMC mode The MVME5500 series offers customers a migration is backward compatible with the MVME2300/ path from the MVME2300, MVME2400, MVME2600, MVME2400 and MVME5100 in PMC mode. In PMC MVME2700 and MVME5100 boards to allow them to mode, 64 pins from PMC slot 1 and 46 pins from PMC take advantage of features such as the MPC7455 slot 2 are available on P2 for PMC rear I/O. In IPMC processor, Gigabit Ethernet and dual independent mode, the MVME5500 series supports legacy 33/66 MHz PMC sites. MVME761 or MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or IPMC712 PMC card is IPMC ModulES populated in PMC slot 1. In this configuration, PMC The IPMC761 and IPMC712 are optional add-on PMC slot 2 contains some signals that are reserved for modules that provide backward compatibility with extended SCSI. previous generation Emerson products (such as MVME2600, MVME2700 and MVME5100 in IPMC mode) using the MVME761 or MVME712M transition module. IPMC modules provide rear I/O support for the following: 2 Front page Interior page TranSITIon ModulES lIBrarIES The MVME761 transition module provides industry- VSI/Pro VSIPL libraries from MPI Software Technology standard connector access to the IEEE 1284 parallel are available on the MVME5500. BETA 4.0 NDDS from port, a 10BaseT or 100BaseT port via an RJ-45 Real Time Innovations (RTI) running over GbE and Native connector, two DB-9 connectors providing access to VME are available on the MVME5500 through RTI. the asynchronous serial ports configured as EIA-574 DTE and two HD-26 connectors providing access to Specifications the sync/async serial ports. These serial ports, labeled ProCESSor as Serial 3 and Serial 4 on the faceplate of the MVME761, ° Microprocessor: MPC7457 are individually user-configurable as EIA-232, DCE or ° Clock Frequency: 1 GHz DTE via the installation of Emerson Serial Interface Modules (SIMs). A P2 adapter board provides interface ° On-chip L1 Cache (I/D): 32KB/32KB signals to the MVME761 transition module. Two ° On-chip L2 Cache (I/D): 512KB separate P2 adapter boards are available: one for 3-row ° L3 Cache: 2MB backplanes and one for 5-row backplanes. The 3-row P2 adapter board provides connection for 8-bit SCSI. SySTEM ConTrollEr A 5-row P2 adapter board supports 16-bit SCSI and ° Marvell GT-64260B PMC I/O. MaIn MEMory The MVME712M transition module provides ° Type: PC133 ECC SDRAM industry-standard connector access to the Centronics ° Speed: 133 MHz parallel port, a narrow SCSI port, and four DB-25 ° Configurations: 512MB in two banks connectors providing access to the asynchronous/ synchronous serial ports jumper configurable as ° Capacity: 512MB on-board, expandable to 1GB EIA-232 DCE or DTE. A P2 adapter board provides with add-on memory mezzanine card. interface signals to the MVME712M transition ° Note: If a PMC module is plugged into PMC slot 1, module. The 3-row P2 adapter board also provides the memory mezzanine card cannot be used connection for 8-bit SCSI. To gain access to the because the PMC module covers the memory mezzanine connector. additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter FlaSh MEMory board is available. This adapter panel replaces the ° Type: EEPROM, on-board programmable traditional 3-row P2 adapter board and extends its capability by providing access to the PMC I/O pins. ° Capacity: 40MB total in two banks of 32MB and 8MB, both soldered Software Support ° Write Protection: 32MB of surface-mount flash is write protectable via jumper FIrMwarE MonITor Firmware must fulfill the traditional functions of nVraM power-on self-test (POST), initialization, low-level ° Capacity: 32KB (4KB available for users) setup and debug, and operating system booting. ° Cell Storage Life: 50 years at 55° C Emerson’s innovative firmware (known as MOTLoad) that is resident on the MVME5500 exceeds these ° Cell Capacity Life: 5 years at 100% duty cycle, 25° C requirements with expanded features such as ° Removable Battery: Yes interrupt driven I/O, more comprehensive power-up tests and extensive diagnostics with new scripting CounTErS/TIMErS capability. And of course, MOTLoad provides a ° TOD Clock Device: M48T37V debugger interface similar to the time proven “bug” ° Real-Time Timers/Counters: Eight, 32-bit interface on previous VMEbus boards from Emerson. programmable ° Watchdog Timer: Time-out generates reset oPEraTIng SySTEMS and KErnElS WindRiver Systems VxWorks, TimeSys Linux, Green Hills Software INTEGRITY and LynuxWorks LynxOS are available for the MVME5500. 3 Front page Interior page VMEBuS InTErFaCE: anSI/VITa 1-1994 VME64 PCI ExPanSIon ConnECTor (IEEE STd 1014) ° Address/Data: A32/D32/D64 ° Controller: Tundra Universe II ° PCI Bus Clock: 33 MHz ° DTB Master: A16-A32; D08-D64, SCT, BLT ° Signaling: 5V ° DTB Slave: A24-A32; D08-D64, BLT, UAT ° Power: +3.3V, +5V, ±12V ° Arbiter: RR/PRI ° Connector: 114-pin connector located on MVME5500 ° Interrupt Handler/Generator: IRQ 1-7/Any one of planar, same location as on MVME5100 planar seven IRQs PowEr rEquIrEMEnTS ° System Controller: Yes, jumperable or auto detect +5V ± 5% ° Location Monitor: Two, LMA32 MVME5500-0163: 6.7 A typ., 8.0 A max. EThErnET InTErFaCES MVME5500-0163 ° Port 1 with memory mezzanine: 7.5 A typ., 9.0 A max. ® Å Controller: Intel 82544EI Gigabit Ethernet controller MVME5500-0163 Å Interface Speed: 10/100/1000Mbps with IPMC712/761: 7.6 A typ., 9.2 A max. Å Connector: Routed to front panel RJ-45 ° Port 2 Note: In a 3-row chassis, PMC current should be Å Controller: Controller integrated into limited to 19.8 watts (total of both PMC slots). In a GT-64260B system controller 5-row chassis, PMC current should be limited to 46.2 Å Interface Speed: 10/100Mbps watts (total of both PMC slots). Å Connector: Routed to front panel RJ-45 or Board SIzE optionally routed to P2, RJ-45 on MVME761 ° Height: 233.4 mm (9.2 in.) aSynChronouS SErIal PorTS ° Depth: 160.0 mm (6.3 in.) ° Controller: Two TL16C550C UARTs ° Front Panel Height: 261.8 mm (10.3 in.) ° Number of Ports: Two, 16550 compatible ° Width: 19.8 mm (0.8 in.) ° Async Baud Rate, bps max.: 38.4K EIA-232, ° Max. Component Height: 14.8 mm (0.58 in.) 115Kbps raw ° Connector: Routed to front panel RJ-45; one on IPMC Modules planar for development use PMC InTErFaCE dual IEEE P1386.1 PCI MEzzanInE Card SloTS ° Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, ° Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors PN4 connectors ° PCI Bus Clock: 33 MHz ° PCI Bus Clock: 33/66 MHz ° Signaling: 5V ° Signaling: 3.3V or 5V, configurable with keying pin ° Module Type: Basic single-wide; P2 I/O ° Power: +3.3V, +5V, ±12V SCSI BuS ° Module Types: Two single-wide or one double- ° Controller: Symbios 53C895A wide, front panel or P2 I/O, PMC and PrPMC support ° PCI Local Bus DMA: Yes, with PCI local bus burst ° Note: If a PMC module is plugged in PMC slot 1, the memory mezzanine card cannot be used because ° Asynchronous (8-bit mode): 5.0MB/s the PMC module covers the memory mezzanine ° Ultra SCSI: 20.0MB/s (8-bit mode), 40.0MB/s connector. (16-bit mode) ° Note: 16-bit SCSI operation precludes the use of some PMC slot 2 signals. 4 Front page Interior page SynChronouS SErIal PorTS PowEr rEquIrEMEnTS ° Controller: 85230/8536 (Additional power load placed on MVME5500 with IPMC installed) ° Number of Ports: Two (IPMC761); one (IPMC712) IPMC761 IPMC712 ° Configuration: IPMC761: TTL to P2 (both ports), SIM configurable on MVME761; IPMC712: EIA-232 to P2 +5V: 0.5 A max. 0.5 A max. ° Baud Rate, bps max.: 2.5M sync, 38.4K async +3.3V: 0.75 A max. 0.75 A max. ° Oscillator Clock Rate (PCLK): 10 MHz/5 MHz aSynChronouS SErIal PorTS ° Controller: 16C550 UART; 85230/8536 ° Number of Ports: Two (IPMC761); three (IPMC712) ° Configuration: EIA-574 DTE (IPMC761); EIA-232 (IPMC712) ° Async Baud Rate, bps max.: 38.4K EIA-232, 115Kbps raw ParallEl PorT ° Controller: PC97307 ° Configuration: 8-bit bi-directional, full IEEE 1284 support; Centronics compatible (minus EPP and ECP on MVME712M) ° Modes: Master only Transition Modules I/o ConnECTorS MVME761 MVME712M Asynchronous Serial Ports Two, DB-9 labeled as COM1 and Three, DB-25 labeled Serial 1, Serial 2 COM2 and Serial 3 Synchronous Serial Ports Two, HD-26 labeled as Serial 3 One, DB-25 labeled as Serial 4 and Serial 4 (user-configurable via installation of SIMs); two 60-pin connectors on MVME761 planar for installation of two SIMs Parallel Port: HD-36, Centronics compatible D-36, Centronics compatible Ethernet: 10BaseT or 100BaseT, RJ-45 Not available SCSI 8- or 16-bit, 50- or 68-pin 8-bit, standard SCSI D-50 connector via P2 adapter Board SIzE ° Height: 233.4 mm (9.2 in.) ° Depth: 80.0 mm (3.1 in.) ° Front Panel Height: 261.8 mm (10.3 in.) ° Front Panel Width – MVME761: 19.8 mm (0.8 in.) ° Front Panel Width – MVME712M: 39.6 mm (1.6 in.) 5 Front page Interior page All Modules EnVIronMEnTal Operating Non-operating Temperature: 0° C to +55° C –40° C to +85° C (inlet air temp. with forced air cooling*) Humidity (NC): 5% to 90% 5% to 90% Vibration: 1 G sinusoidal, 5–100 Hz 2 axes horizontal and vertical (NEBS1) *Note: Reference cooling requirements section of the user’s manual. dEMonSTraTEd MTBF Predicted MTBF 207,058 hours, calculated using Bellcore Standard: Issue 6, Method 1, Case 3 ElECTroMagnETIC CoMPaTIBIlITy (EMC) ° Intended for use in systems meeting the following regulations: Å U.S.: FCC Part 15, Subpart B, Class A (non-residential) Å Canada: ICES-003, Class A (non-residential) ° Emerson board products are tested in a representative system to the following standards, results pending: Å CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 SaFETy All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. 6 Front page Interior page Ordering Information Part Number Description MVME55006E-0161 1 GHz MPC7457 PowerPC processor, 512MB SDRAM, Scanbe handles 6E MVME55006E-0163 1 GHz MPC7457 PowerPC processor, 512MB SDRAM, IEEE handles 6E Memory RAM55006E-007 512MB memory mezzanine expansion card related Products IPMC7126E-001 Multifunction rear I/O PMC module; 8-bit SCSI, Ultra Wide SCSI, one parallel port, three async and one sync/async serial ports 5E IPMC7616E-002 Universal IPMC761 for MVME5XXX & MVME6100 6E MVME712M6E Transition module with one DB-25 sync/async serial port, three DB-25 async serial port, one AUI connector, one D-36 parallel port, and one 50-pin 8-bit SCSI; includes 3-row DIN P2 adapter board and cable 5E MVME7616E-001 Multifunction rear I/O PMC module; 8-bit SCSI, one parallel port, two async and two sync/async serial ports. Transition module with two DB-9 async serial port connectors, two HD-26 sync/ async serial port connectors, one HD-36 parallel port connector, one RJ-45 10/100 Ethernet connector; includes 3-row DIN P2 adapter board and cable (for 8-bit SCSI) 5E MVME7616E-011 Transition module with two DB-9 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector, one RJ-45 10/100 Ethernet connector; includes 5-row DIN P2 adapter board and cable (for 16-bit SCSI); requires backplane with 5-row SoluTIon SErVICES DIN connectors 5E Emerson Network Power PMCSPAN16E-002 Primary PMCSPAN-002 with original VME Scanbe ejector handles 5E provides a portfolio of solution PMCSPAN16E-010 Secondary PMCSPAN-010 with original VME Scanbe ejector handles 5E services optimized to meet your needs throughout the documentation product lifecycle. Design V5500A/IH MVME5500 Single-Board Computer Installation and Use services help speed time-to- V5500A/PG MVME5500 Single-Board Computer Programmer’s Reference Guide market. Deployment services include global 24x7 technical VME761A/IH MVME761 Transition Module Installation and Use support. Renewal services VME712MA/IH MVME712M Transition Module Installation and Use enable product longevity MOTLODA/UM MOTLoad Firmware Package User’s Manual and technology refresh. Plus solution extras include VIPMCA/IH IPMC712/761 I/O Module Installation and Use enhanced warranty and PMCSPANA/IH PMCspan PMC Adapter Carrier Board Installation and Use repairs. PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Business-Critical Continuity, Emerson Network Power and Emerson Network Power the Emerson Network Power logo are trademarks and Sales Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720, Shanghai, China +86 215292 5693 service marks of Emerson Electric Co. Paris, France +33 1 69 35 77 00 , Tokyo, Japan +81 3 5424 3101, Munich, Germany +49 (0) 89 9 608 2 333 ©2008 Emerson Electric Co. Hong Kong, China +852 2966 3210, Tel Aviv, Israel +972 3 568 4387 EmersonNetworkPower.com/embeddedcomputing MVME5500-D11 01/08