ACT/TECHNICO MVME3100
Specifications
Board Unique ID
Height: 233.4 mm (9.2 in.) Depth: 160.0 mm (6.3 in.) Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Max. Component Height: 14.8 mm (0.58 in.) Weight: 468 g/16.5 oz. (IEEE handles)
Compactflash
Type: Double data rate (DDR1) ECC SDRAM Speed: DDR333 (166 MHz) Capacity: Up to 512MB SODIMM Configurations: One single-bank module; 256MB or 512MB
EIDE
TOD Clock Device: Maxim DS1375 I2C device with battery backup Cell Storage Life: 10 years at 25° C Cell Capacity Life: One year at 100% duty cycle, 25° C Removable Battery: Yes Real-Time Timers/Counters: Four, 32-bit programmable timers in PLD; four, 32-bit programmable/ cascadable timers in MPC8540 Watchdog Timer: Internal to MPC8540. Second level time-out can generate reset.
Environment
Operating Non-operating Temperature: 0° C to +55° C (inlet air temp. with forced air cooling) –40° C to +85° C Humidity (NC): 5% to 90% 5% to 90% Vibration: 1 G RMS, 5-100 Hz sine 2 G RMS, 15-2000 Hz sine 0.01g2/Hz (4.5 GRMS) 15-2000 Hz random Shock: 20 G peak (half sine) 11ms
Ethernet
Controller: MPC8540 Triple Speed (TSEC) and Fast (FEC) Ethernet Controllers Interface Speed: Two @ 10/100/1000Mbps (TSEC), one @ 10/100/Mbps (FEC) Connector: One Gigabit Ethernet port routed to front panel RJ-45, one Gigabit Ethernet port and one 10/100 port routed to VMEbus P2 connector, pin out matching MVME721 RTM Indicators: Link status/speed/activity
External Card
Integrated within MPC8540
ISA
Port 1 Controller: MPC8540 Duart (second port N/C) Number of Ports: One 16550 compatible Configuration: EIA-232 DTE (RxD, TxD, RTS, CTS) Async Baud Rate, bps max.: 38.4K EIA-232, 115Kbps raw Connector: One front panel RJ-45 Ports 2-5 Controller: Exar ST16C544D Quart Number of Ports: Four 16550 compatible Configuration: EIA-232 (RxD, TxD, RTS, CTS) USB Interface Controller: NEC µ720101 Configuration: USB 2.0 Number of ports: One Connector: One powered port routed to front panel Serial ATA Interface Controller: Intel® G31244 Configuration: 1.5Gbps/port, Legacy or DPA mode (switch-selected) Number of Ports: Two Connectors: One routed to front panel, one header (+ power) on board top surface Indicators: Planar activity LEDs on board back side Async Baud Rate, b/s max: 38.4K EIA-232, 115Kbps raw Connector: Via VMEbus P2 connector, pinout matching MVME721 RTM
L3 Cache
Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (nonresidential) Canada: ICES-003, Class A (non-residential) Emerson board products are tested in a representative system to the following standards, results pending: CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024
LAN
IEEE handles Connectors for serial, Gigabit Ethernet, USB, and SATA ports Openings for PMC sites
LVDS
Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors (PN4 for PMC1 only) PCI Bus Clock: 33 MHz, 66 MHz or 100 MHz PCI/PCI-X Signaling: 3.3V, 5V tolerant Power: +3.3V, +5V, ±12V
Power Requirement
(Not including power required by PMC or IPMC modules) +5V ± 5% MVME3100: 4.5 A typ., 5.6 A max.
Processor
Microprocessor: Freescale MPC8540 PowerQUICC III – PowerPC e500 core Clock Frequency: 667 or 833 MHz On-chip L1 Cache (I/D): 32K/32K On-chip L2 Cache: 256KB look-aside
Processor Side Bus Frequency
Type: Flash, on-board programmable Capacity: 64MB or 128MB soldered flash options Write Protection: Hardware via switch, software via register or sector lock
SATA
All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers.
SSD
Address/Data: A32/D32/D64 PCI Bus Clock: 33 MHz Signaling: 5V Power: +3.3V, +5V, ±12V Connector: One 114-pin connector located on MVME3100 planar, same location as on MVME5500 planar
Tv-out
Type: SEEPROM, on-board programmable Capacity: 128KB (available for users), 8KB baseboard Vital Product Data (VPD)
VGA
122,480 hours calculated using Mil Std 217
Video Interface
Compliance: ANSI/VITA 1-1994 VME64 (IEEE STD 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA 1.5-199x 2eSST Controller: Tundra Tsi148 PCI-X to VMEbus bridge with support for VME64 and 2eSST protocols Module Types: Two single-wide or one double-wide, front panel or P2 I/O, PMC and PrPMC support, PMC1 site Pn4 routed to VMEbus P2 connector rows A and CDTB Master: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST DTB Slave: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST, UAT Arbiter: RR/PRI Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs System Controller: Yes, switchable or auto detect Location Monitor: Two, LMA32
Features
- 2eSST VMEbus protocol offering interoperability with products such as the MVME6100 at higher bandwidths
- Board support packages for VxWorks, LynxOS, and Linux
- Dual 33/66/100MHz PMC-X sites for expansion via industry standard modules, support for processor PMCs and PMCspan
- MVME721 direct-connect rear transition module (RTM) for I/O routing through rear of compact VMEbus chassis
- System-on-chip Freescale MPC8540 with PowerPC e500 processor core, integrated memory controller, DMA engine, PCI-X interface, Ethernet and local I/O
- Two Gigabit Ethernet ports plus an additional 10/100BaseTX port
- Up to 512MB of DDR333 ECC memory
- USB 2.0 and Serial ATA controllers for integrating cost-effective peripherals
Datasheet
Extracted Text
MVME3100 Series VMEbus Single-Board Computer Front page The Emerson Network Power MVME3100 SBC helps OEMs of industrial, medical, and The MVME3100 single-board defense/aerospace VMEbus platforms add performance and features for competitive computer (SBC) gives advantage while still protecting the fundamental investment in VMEbus and related additional performance while technologies. Customers can keep their VMEbus infrastructure (chassis, backplanes, protecting your investment and other VMEbus and PMC boards) while improving performance and extending the lifecycle. Also, the extended lifecycle of Emerson computing products helps reduce Interior page n System-on-chip Freescale churns in development and support efforts resulting from frequent product changes. ® MPC8540 with PowerPC e500 processor core, integrated The MVME3100, one of the first VMEbus products with the system-on-chip MPC8540 memory controller, DMA engine, processor, offers a growth path for VMEbus customers with applications on the PCI-X interface, Ethernet and previous generation of VME, specifically the MPC8240 and similar (MPC603 family) local I/O processors. The system-on-chip implementation offers power/thermal, reliability, n Two Gigabit Ethernet ports plus and lifecycle advantages not typically found in alternative architectures. The faster an additional 10/100BaseTX processor and 2eSST VMEbus interface (the same as the MVME6100) combine to port offer significant performance improvement. n Up to 512MB of DDR333 ECC New cost-effective peripherals can be integrated easily using USB and Serial ATA memory interfaces. SATA represents a significant cost reduction opportunity from older SCSI n USB 2.0 and Serial ATA technology, with generally lower drive pricing for equivalent capacity. controllers for integrating cost-effective peripherals n 2eSST VMEbus protocol offering interoperability with products such as the MVME6100 at higher bandwidths n Board support packages for VxWorks, LynxOS, and Linux n Dual 33/66/100MHz PMC-X sites for expansion via industry standard modules, support for processor PMCs and PMCspan n MVME721 direct-connect rear transition module (RTM) for I/O routing through rear of compact VMEbus chassis Front page Interior page MVME3100 Block Diagram Device FP FP bus Flash Serial Timers x4 EIA232 GbE PHY Memory bus JTAG Processor DDR ECC 166 MHz Header SDRAM MPC8540 2 I C RTC SEEPROM VPD Temp B 66 MHz 64-bit PCI-X PCI-X Bridge PCI-X Bridge FP FP 66/100 MHz 64-bit PCI-X 33 MHz PCI USB SATA FP FP PCI VMEbus Expansion USB SATA PHY PHY Tsi148 Connector PMC PMC Depopulated on reduced version Site 1 Site 2 Planar GbE 10/100E EIA232 d a VMEbus P1 b c z VMEbus P2 system-on-chip (SoC) processor, running at speeds up Overview to 833 MHz, is well-suited for I/O and data-intensive VMEBuS 2ESST PErforManCE applications. The integrated SoC design creates an I/O The 2eSST protocol offers an available VME bus intensive state-of-the-art package that combines a bandwidth of up to 320MB/s, an increase of up to 8x low power processing core and on-chip L2 cache with over VME64, while maintaining backward compatibility integrated controllers for memory, PCI-X, DMA , with VME64 and VME32. The combination of the Ethernet and local device I/O. The on-chip PCI-X bus latest Texas Instruments VMEbus transceivers and and a 166 MHz DDR memory bus are well matched to the Tundra Tsi148 VMEbus bridge’s legacy protocol the processor. To ensure that the MVME3100 series support allows customers to integrate the MVME3100 can handle the 320MB/s data rates of 2eSST, the series into their existing infrastructure providing Tsi148 VMEbus interface chip is directly connected to backward compatibility and thereby preserving their the integrated PCI-X bus at 66 MHz. A secondary PCI-X investment in existing VMEbus boards, backplanes, bus has dual PMC-X sites—each site supports PMC or chassis and software. PMC-X cards supporting PCI bus speeds from 33 to 100 MHz. The MVME3100 also offers dual Gigabit BalanCEd PErforManCE Ethernet interfaces, a 10/100 interface, USB 2.0, dual The MVME3100 series provides more than just faster Serial ATA ports, and five (5) RS232 serial connections. VMEbus transfer rates; it provides balanced perfor- All of this adds up to a set of well-balanced subsystems mance from the processor, memory subsystem, local offering unparalleled performance. buses and I/O subsystems. This coupled with a wealth of I/O interfaces make the MVME3100 series ideal for use as an application-specific compute blade, or an intelligent I/O blade/carrier. The Freescale MPC8540 2 Front page Interior page Backward Compatibility Specifications The MVME3100 series continues the direction of ProCESSor providing a migration path from Emerson’s embed- ° Microprocessor: Freescale MPC8540 PowerQUICC ded controllers such as the MVME16x, MVME17x, III – PowerPC e500 core MVME2300/MVME2400, and from Emerson SBCs ° Clock Frequency: 667 or 833 MHz such as the MVME2600/2700 to a single platform. The ° On-chip L1 Cache (I/D): 32K/32K MVME3100 series, like the MVME5100, MVME5500, ° On-chip L2 Cache: 256KB look-aside and MVME6100 series, merged the best features of Emerson’s embedded controllers and SBCs enabling SySTEM ConTrollEr OEMs to support varying I/O requirements with ° Integrated within MPC8540 the same base platform, simplifying part number maintenance, technical expertise requirements, MaIn MEMory and sparing. ° Type: Double data rate (DDR1) ECC SDRAM The MVME3100 series offers customers an alternate ° Speed: DDR333 (166 MHz) migration path from the 68K, MVME2100, MVME2300, ° Capacity: Up to 512MB SODIMM MVME2400, MVME2600, MVME2700, and MVME5100 ° Configurations: One single-bank module; 256MB boards to allow them to take advantage of features or 512MB such as the integrated MPC8540 SoC processor , DDR memory, Gigabit Ethernet, PCI-X, USB, SATA, flaSh MEMory and 2eSST. ° Type: Flash, on-board programmable ° Capacity: 64MB or 128MB soldered flash options PCI ExPanSIon ° Write Protection: Hardware via switch, software via The MVME3100 has a 32/64-bit, 33 MHz PCI connec- register or sector lock tion to support PCI expansion carriers such as the Emerson PMCspan. non-VolaTIlE MEMory ° Type: SEEPROM, on-board programmable TranSITIon ModulES The MVME721 transition module provides industry- ° Capacity: 128KB (available for users), 8KB base- board Vital Product Data (VPD) standard connector access to one 10/100/1000BaseTx port. All of these are via RJ45 connectors. The MVME721 VMEBuS InTErfaCE RTM is designed to directly connect to the VME backplane ° Compliance: ANSI/VITA 1-1994 VME64 (IEEE STD in chassis’ with an 80mm deep rear-transition area. 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA 1.5-199x 2eSST Software Support ° Controller: Tundra Tsi148 PCI-X to VMEbus bridge fIrMwarE MonITor with support for VME64 and 2eSST protocols The MVME3100 firmware (known as MOTLoad) is ° DTB Master: A16, A24, A32, A64; D08-D64, SCT, resident in the MVME3100 flash and provides power- BLT, MBLT, 2eVME, 2eSST on self-test initialization and operating system ° DTB Slave: A16, A24, A32, A64; D08-D64, SCT, BLT, booting capabilities. In addition, it provides a debug- MBLT, 2eVME, 2eSST, UAT ger interface similar to the time proven “BUG” ° Arbiter: RR/PRI interface on previous VMEbus boards from Emerson. ° Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs oPEraTIng SySTEMS and KErnElS The MVME3100 series supports booting a variety of ° System Controller: Yes, switchable or auto detect operating systems including a complete range of real- ° Location Monitor: Two, LMA32 time operating systems and kernels. A VxWorks board support package, LynxOS board support package and Linux support will be available for the MVME3100 series. 3 Front page Interior page EThErnET InTErfaCE ° Module Types: Two single-wide or one double-wide, front panel or P2 I/O, PMC and PrPMC support, ° Controller: MPC8540 Triple Speed (TSEC) and Fast PMC1 site Pn4 routed to VMEbus P2 connector (FEC) Ethernet Controllers rows A and C ° Interface Speed: Two @ 10/100/1000Mbps (TSEC), one @ 10/100/Mbps (FEC) PCI ExPanSIon ConnECTor for InTErfaCE To ° Connector: One Gigabit Ethernet port routed to PMCSPan BoardS front panel RJ-45, one Gigabit Ethernet port and ° Address/Data: A32/D32/D64 one 10/100 port routed to VMEbus P2 connector, ° PCI Bus Clock: 33 MHz pin out matching MVME721 RTM ° Signaling: 5V ° Indicators: Link status/speed/activity ° Power: +3.3V, +5V, ±12V aSynChronouS SErIal PorTS ° Connector: One 114-pin connector located on ° Port 1 MVME3100 planar, same location as on MVME5500 planar Å Controller: MPC8540 Duart (second port N/C) Å Number of Ports: One 16550 compatible CounTErS/TIMErS Å Configuration: EIA-232 DTE (RxD, TxD, RTS, CTS) ° TOD Clock Device: Maxim DS1375 I2C device with Å Async Baud Rate, bps max.: 38.4K EIA-232, battery backup 115Kbps raw ° Cell Storage Life: 10 years at 25° C Å Connector: One front panel RJ-45 ° Cell Capacity Life: One year at 100% duty cycle, 25° C ° Ports 2-5 ° Removable Battery: Yes Å Controller: Exar ST16C544D Quart ° Real-Time Timers/Counters: Four, 32-bit program- Å Number of Ports: Four 16550 compatible mable timers in PLD; four, 32-bit programmable/ cascadable timers in MPC8540 Å Configuration: EIA-232 (RxD, TxD, RTS, CTS) ° Watchdog Timer: Internal to MPC8540. Second Å Async Baud Rate, b/s max: 38.4K EIA-232, level time-out can generate reset. 115Kbps raw Å Connector: Via VMEbus P2 connector, pinout Board SIzE and wEIghT matching MVME721 RTM ° Height: 233.4 mm (9.2 in.) ° USB Interface ° Depth: 160.0 mm (6.3 in.) Å Controller: NEC µ720101 ° Front Panel Height: 261.8 mm (10.3 in.) Å Configuration: USB 2.0 ° Width: 19.8 mm (0.8 in.) Å Number of ports: One ° Max. Component Height: 14.8 mm (0.58 in.) Å Connector: One powered port routed to front panel ° Weight: 468 g/16.5 oz. (IEEE handles) ° Serial ATA Interface ® Å Controller: Intel G31244 PowEr rEquIrEMEnTS (Not including power required by PMC or IPMC modules) Å Configuration: 1.5Gbps/port, Legacy or DPA mode (switch-selected) +5V ± 5% Å Number of Ports: Two MVME3100: 4.5 A typ., 5.6 A max. Å Connectors: One routed to front panel, one header (+ power) on board top surface CalCulaTEd MTBf Å Indicators: Planar activity LEDs on board back side ° 122,480 hours calculated using Mil Std 217 dual IEEE P1386.1 PCI MEzzanInE Card SloTS ° Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors (PN4 for PMC1 only) ° PCI Bus Clock: 33 MHz, 66 MHz or 100 MHz PCI/PCI-X ° Signaling: 3.3V, 5V tolerant ° Power: +3.3V, +5V, ±12V 4 Front page Interior page oThEr fEaTurES All Modules ° Jumper-less configuration EnVIronMEnTal ° On-board temperature sensor (Maxim DS1621) Operating Non-operating ° JTAG header for connection of diagnostic tools Temperature: 0° C to +55° C –40° C to +85° C (inlet air temp. fronT PanEl with forced air cooling) ° IEEE handles ° Connectors for serial, Gigabit Ethernet, USB, and Humidity (NC): 5% to 90% 5% to 90% SATA ports Vibration: 1 G RMS, 5-100 Hz ° Openings for PMC sites sine 2 G RMS, 15-2000 Hz sine Transition Modules 2 0.01g /Hz (4.5 GRMS) 15-2000 Hz random I/o ConnECTorS Shock: 20 G peak (half sine) ° MVME721 11ms Å Asynchronous Serial Ports: Four, RJ-45, labeled as COM2-5 ElECTroMagnETIC CoMPaTIBIlITy (EMC) Å Ethernet: One 10/100/1000BaseTX and one ° Intended for use in systems meeting the following 10/100BaseTX, RJ-45 regulations: Å U.S.: FCC Part 15, Subpart B, Class A (non- non-VolaTIlE SToragE residential) ° 8KB VPD SEEPROM Å Canada: ICES-003, Class A (non-residential) Board SIzE ° Emerson board products are tested in a representa- tive system to the following standards, results ° Height: 233.4 mm (9.2 in.) pending: ° Depth: 80.0 mm (3.1 in.) Å CE Mark per European EMC Directive 89/336/EEC ° Front Panel Height: 261.8 mm (10.3 in.) with Amendments; Emissions: EN55022 Class B; ° Front Panel Width: 19.8 mm (0.8 in.) Immunity: EN55024 CalCulaTEd MTBf SafETy ° 894,657 hours calculated using Mil Std 217 ° All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. Ordering Information Part Number Description 667 MHz MPC8540 processor, 256MB DDR SDRAM, 64MB flash, Gigabit Ethernet, SATA , MVME31006E-1152 IEEE handles, 6E 833 MHz MPC8540 processor, 512MB DDR SDRAM, 128MB flash, Gigabit Ethernet, SATA, USB, MVME31006E-1263 PCI expansion connector , IEEE handles, 6E Related Products PMCSPAN26E-002 Primary PMCSPAN with IEEE ejector handles, 6E PMCSPAN26E-010 Secondary PMCSPAN with IEEE ejector handles, 6E MVME721-101 Rear transition module 5 Front page Interior page SoluTIon SErVICES Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. Plus solution extras include enhanced warranty and repairs. PowerPC is a trademark of IBM Corp. and used under license. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Business-Critical Continuity, Emerson Network Power and Emerson Network Power the Emerson Network Power logo are trademarks and Sales Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720, Shanghai, China +86 215292 5693 service marks of Emerson Electric Co. Paris, France +33 1 69 35 77 00 , Tokyo, Japan +81 3 5424 3101, Munich, Germany +49 (0) 89 9 608 2 333 ©2008 Emerson Electric Co. Hong Kong, China +852 2966 3210, Tel Aviv, Israel +972 3 568 4387 MVME3100-D3 01/08 EmersonNetworkPower.com/embeddedcomputing
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the MVME3100 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

ACT Technico MPC755 Extended Temperature 6U VME 5106 PowerPC Processor Blade with Two Intel 82559ER ...

Act/Technico MVME5100-R VMEbus Processor Module - MPC7410 or MPC750 processor, 100MHz FSB, Dual Ethe...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods