Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE Patented labor saving design installs in 15 minutes or less, especially designed for Ţ eld installation. Factory or Ţ eld installed inside or outside (Ţ eld only) ţ uorescent Ţ xture to operate lamp(s) at reduced light output, providing optimum glare-free illumination for a minimum of 90 minutes upon interruption of normal power. CONSTRUCTION Fluorescent Battery Packs Labor-saving design – 1/3 fewer wires and fewer connections than typical ţ uo- rescent power packs. Engineering-grade charcoal gray plastic housing is impact-resistant, corrosion- resistant and scratch-resistant. UL94-0 ţ ame rating. PSQ500QD U.S. Patent No. 6,522,147. Patented integrated test switch pilot light that requires only one-hole drilling. Operates one 2'- 4' or U-shaped ţ uorescent lamp for 90 minutes. (Compatible with most electronic T8 and magnetic T12, instant start, rapid start and slimline ballasts). ELECTRICAL Dual-voltage input capability (120V or 277V). Additional input lead provided to allow switching of Ţ xture. Constant-current type charger. High-efŢ ciency push-pull inverter is the most effective method of converting DC power. It provides maximum light output, battery life and reliability. Battery: Sealed, maintenance-free, high-temperature nickel cadmium battery. Ensures long life over a wide range of temperatures. Automatic battery recharge after 90-minute discharge. Fully charged after 72 hours. INSTALLATION New Quick-Disconnect wiring harness provides easy replacement capabilities. Push-nuts and insulation-displacement connectors reduce installation time. Cus- tom, one-piece test switch/pilot light allows for mounting ţ exibility. LISTING Mounts concealed within Ţ xture wireway for clean appearance and protection UL listed. Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA il- against vandalism. lumination standards. Compact size (9.5" L x 2.5" W x 1.18" H) allows installation in a variety of ţ uorescent Standard unit is UL approved for installation in sealed and gasketed Ţ xtures. Ţ xtures: troffers, industrials, commercials and strips. For product UL approved for use in wet and damp location Ţ xtures, see PSQ500DW Unit mounting centers are identical to a standard ballast. speciŢ cation sheet. Unit wires two ways: on night light circuit (permanently energized) or on switch- WARRANTY able circuit (unswitched circuit to the battery charger and switched circuit to the Three-year warranty. Ţ xture ballast). Unit will strike normally off lamp. ORDERING INFORMATION For shortest lead times, conŢ gure product using standard options (shown in bold). Example: PSQ500QD SD PSQ500QD 2 Accessories Order as separate item. ELA TSPLP Remote or replacement test switch/pilot light; mounts up to Designation Options 25' away from Ţ xture 1 PSQ500QD Battery SD Self-diagnostics ELA TSPLPSD Remote or replacement test switch/pilot light for self-diag- pack nostics; mounts up to 25' away from Ţ xture ELA PSRME Remote mounting enclosure ELA PSMKSD External mounting kit for self-diagnostics module PSSD Field-installable self-diagnostic module NOTES: 1 Self-diagnostics (PSSD) module ships separately. See PSSD Inverter Acces- sories spec sheet for details on self-diagnostics. 2 See Accessories speciŢ cation sheets for details on other compatible devices ELA-RTS-TSPLP-PSTS-PSPRSB and ELA-PSMK-PSMKSD-PSDMT-PSRME. Emergency Sheet #: PSQ500QD PSBP-135 PSQ500QD Fluorescent Battery Packs SPECIFICATIONS MOUNTING All dimensions are inches (millimeters). BATTERY 2-3/16 (59) Sealed Nickel-Cadmium Shelf Expected Optimum 1 1 2 Voltage life life Maintenance temperature 3 2.4 3 years 7–9 years none 32–100°F 1-3/16 (29) NOTES: 1 At 77°F. 2 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Cross section end view Higher and lower temperatures affect life and capacity. Consult factory for detailed Length: 9-1/2 (241) information. Shipping weight: 1.4 lbs. (0.6 kgs.) 3 All life safety equipment, including emergency lighting for path of egress must be main- tained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties. ELECTRICAL Maximum AC input Volts Amps Watts 120 0.27 2.5 PERFORMANCE 277 0.29 2.5 Emergency Lamp Lumen Output LAMP COMPATIBILITY 550 Lamp/Ballast Type Wattage Emergency Operation 24"- 48" T12 (magnetic) 34 – 40 U-Lamp T12 (magnetic) 34 – 40 U-Lamp T8 (electronic) 16 – 31 24"- 48" T8 (electronic) 17 – 32 250 48" T12 (magnetic) 32 – 40 Long Compact (4-pin) 18 – 40 One-lamp emergency operation. Tested and approved lamp/ballast combinations. Consult Light output data based on F32T8 lamps (2800 lamp lumen rating). Two-lamp electronic instant Lithonia Lighting representative for additional lamp/ballast combination compatibility not start ballast. Thermal and ballast factor corrections have been included. Light output for other lamp and ballast types will vary. Luminaire efŢ ciency and application conditions must shown. be determined to calculate actual illuminance levels. Consult Lithonia Lighting representative for further information. KEY OPTIONS KEY FEATURES Self-diagnostics module. New Quick-Disconnect wiring system Pushnuts and insulation displacement connectors reduce installation time. Lithonia Lighting Emergency Lighting Systems One Lithonia Way, Conyers, GA 30012 Phone: 800-334-8694 Sheet #: PSQ500QD www.lithonia.com © 1999-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 7/12/10