Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE Factory or Ţ eld installed inside or outside (Ţ eld only) ţ uorescent Ţ xture to operate lamp(s) at reduced light output, providing optimum glare-free illumination for a minimum of 90 minutes upon interruption of normal power. CONSTRUCTION Engineering-grade charcoal white polycarbonate housing resists impact, scratch- Fluorescent Battery Packs es and corrosion. UL94V-0 ţ ame rating. Space-saving housing provides extra room for wire routing in ballast channel. Nylon wire management clips facilitate ballast cover replacement. Dual-voltage input capability (120V or 277V). PS300 DW Patent-pending integrated test switch pilot light that requires only one-hole drilling. Operates one 2' – 4' ţ uorescent lamp for 90 minutes. Compatible with electronic, rapid-start, slimline, preheat or trigger-start ballasts in standard or energy-saving conŢ gurations. Protects against partial or isolated power outages. Low-glare, shadow-free illumi- nation provides excellent visibility for safe building evacuation. Unit wires two ways: on night light circuit (permanently energized) or on switch- able circuit (unswitch circuit to battery charger and switch circuit to the Ţ xture ballast). ELECTRICAL Constant current-type charger. Capacitive input circuit provides high efŢ ciency and reliable operation. High-efŢ ciency push-pull inverter is the most effective method of converting DC power to AC power. It provides maximum light output, battery life and reliability. Battery: Sealed, maintenance-free, high-temperature nickel cadmium battery. Ensures long life over wide temperature ranges. Automatic battery recharge after LISTING 90-minute discharge. Fully charged after 72 hours. UL listed. Meets UL 924, NFPA 101 (Current Life Safety Code), NEC and OSHA il- Pilot light and test switch provide visual and manual means of monitoring system lumination standards. operation. UL approved for installation in sealed and gasketed Ţ xtures. UL approved for INSTALLATION installation in wet and damp location listed Ţ xtures, 0-50°C (32-122°F). (Note: DW Mounts concealed within Ţ xture wireway for clean appearance and protection option does not make the battery pack suitable for mounting outside the Ţ xture in against vandalism. Two 1/2" holes in Ţ xture channel permit mounting of test switch/ wet location applications.) pilot light behind Ţ xture lens. Mounting centers are identical to a standard ballast. WARRANTY Compact size (9-1/2" L x 2-1/2" W x 1-5/8" H) Ţ ts a variety of ţ uorescent troffers, Three-year warranty. industrials, commercials and strips. ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: PS300 DW 1 Accessories PS300 DW Order as separate items. ELA TSPLP Remote or replacement test switch pilot light. Mounts up Series Application to 25' away from Ţ xture. PS300 Battery pack DW Damp/wet location ELA PSRME Remote mounting enclosure. Factory installation is available on most Lithonia Lighting Ţ xtures. Consult Fluorescent Sheet EL for details. NOTES: 1 See Accessories speciŢ cation sheets for details on other compatible devices ELA-RTS-TSPLP-PSTS-PSPRSB and ELA-PSMK-PSMKSD-PSDMT-PSRME. Emergency Sheet#: PS300 DW PSBP-100 PS300 DW Fluorescent Battery Packs SPECIFICATIONS MOUNTING All dimensions are inches (millimeters). BATTERY Sealed Nickel-Cadmium Shelf Expected Optimum 1 1 2 Voltage life life Maintenance temperature 3 4.8 3 years 7–9 years none 32–100°F 1-5/8 (41) NOTES: 1 At 77°F. 2 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed o o information. Damp location models are UL listed 0-50 C (32-122 F). 3 All life safety equipment, including emergency lighting for path of egress must be main- tained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties. 2-1/2 (64) Cross section end view Length: 9-1/2 (241) ELECTRICAL Shipping weight: 1.4 lbs. (0. 6 kgs.) Maximum AC input Volts Amps Watts 120 .28 2.5 277 .25 2.5 PERFORMANCE Emergency Lamp Lumen Output LAMP COMPATIBILITY Lamp Type Wattage Emergency Operation U-Lamp T8 16 – 31 24" – 48" T8 17 – 32 Circline T9 20 – 40 U-Lamp T12 34 – 40 24" – 48" T12 20 – 40 Biax Twin Tube (4-pin) 18 – 40 One-lamp emergency operation for 1 – 4 lamp ballasts. Light output data based on F32 T8 lamps (2800 lamp lumen rating). Two-lamp, energy- saving, rapid-start ballast. Thermal and ballast factor corrections have been included. Light output for other lamp and ballast types will vary. Luminaire efŢ ciency and applica- tion conditions must be determined to calculate actual luminance levels. Consult with a Lithonia Lighting representative for further information. KEY FEATURES Unique space-saving housing. Polarized quick-connect integrated test switch pilot light assembly Lithonia Lighting Emergency Lighting Systems One Lithonia Way, Conyers, GA 30012 Phone: 800-334-8694 Fax: 770-981-8141 Sheet #: PS300 DW www.lithonia.com © 1998-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 7/12/10