Catalog Number Notes Type FEATURES INTENDED USE Patented labor saving design installs in 15 minutes or less, especially designed for field installation. Factory or field installed inside or outside (field only) fluorescent fixture to operate lamp(s) at reduced light output, providing optimum Fluorescent Battery Packs glare-free illumination for a minimum of 90 minutes upon interruption of normal power. CONSTRUCTION PSQ500 Labor-saving design – 1/3 fewer wires and fewer connections than typical fluorescent power packs. Engineering-grade white Lexan polycarbonate housing is impact-resistant, corrosion-resistant and scratch-resistant. UL94-0 flame rating. Space-saving housing provides extra room to route wire in ballast channel. U.S. Patent No. 5,814,971 Patent pending integrated test switch pilot light that requires only one-hole drilling. PERFORMANCE Operates one 2'- 4' or U-shaped fluorescent lamp for 90 minutes. (Compatible with electronic T8 and magnetic T12, instant start, rapid start and slimline ballasts). Protects against partial or isolated power outages. Low-glare, shadow-free illumination provides excellent visibility for safe building evacuation. BATTERY Sealed, maintenance-free, high-temperature nickel cadmium battery. Ensures long life over a wide range of temperatures. Automatic battery recharge after 90-minute discharge. ELECTRONIC Dual-voltage input capability (120V or 277V). Additional input lead provided to allow switching of fixture. Constant-current type charger. High-efficiency push-pull inverter is the most effective method of converting DC power. It provides maximum light output, battery life and reliability. INSTALLATION LISTING Push-nuts and insulation-displacement connectors reduce installation time. Custom, one-piece test switch/pilot light allows for mounting flexibility. UL listed. Meets UL 924, NFPA 101 (current Life Safety Code), NEC and Mounts concealed within fixture wireway for clean appearance and protection OSHA illumination standards. against vandalism. Standard unit is UL approved for installation in sealed and gasketed fixtures. DW option is UL approved for use in wet and damp location Compact size (9-1/2" L x 2-1/2" W x 1-1/2" H) allows installation in a variety of fluorescent fixtures: troffers, industrials, commercials and strips. listed fixtures. (Note: DW option does not make the battery pack suitable for mounting outside the fixture in a wet location application.) Unit mounting centers are identical to a standard ballast. WARRANTY Unit wires two ways: on night light circuit (permanently energized) or on Three-year total customer satisfaction warranty. (For complete details, switchable circuit (unswitched circuit to the battery charger and switched circuit to the fixture ballast). Unit will strike normally off lamp. see warranty page in Product Selection Guide). Example: PSQ500 ORDERING INFORMATION Choose the boldface catalog nomenclature that best suits your needs and Accessories* write it on the appropriate line. Order accessories as separate catalog number. Order as separate item. PSQ500 ELA TSPLP Remote or replacement test switch/pilot light; mounts up to 25' away from fixture ELA TSPLPSD Remote or replacement test switch/pilot Designation Options light for self-diagnostics; mounts up to 25' away from fixture PSQ500 Battery pack DW UL approved for use in wet and damp location listed fixtures 0- ELA PSRME Remote mounting enclosure* o o 50 C (32-122 F). ELA PSMKSD External mounting kit for self-diagnostics module 120V 50Hz 120 volts; 50 hertz PSSD Field-installable self-diagnostic module 220-240V 50 Hz 220 or 240 volts; 50 hertz 220-240V 60 Hz 220 or 240 volts; 60 hertz * See Inverter Accessories specification sheets for details on 1 SD Self-diagnostics other compatible devices. NOTE: 1 Self-diagnostics (PSSD) module ships with fluorescent battery pack. See PSSD Inverter Accessories spec sheet for details on self-diagnostics. Emergency Sheet #: PSQ500 PSBP-140 PSQ500 Fluorescent Battery Packs SPECIFICATIONS MOUNTING All dimensions are inches (millimeters). BATTERY Sealed Nickel-Cadmium Shelf Expected Optimum 1 1 2 Voltage life life Maintenance temperature 3 3.6 3 years 7–9 years none 32–100°F 1-1/2 (38) Notes: 1 At 77°F. 2 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed information. Damp location models are UL o o listed 0-50 C (32-122 F). 3 Periodic system status test recommended. 2-1/2 (64) ELECTRICAL Maximum AC input Volts Amps Watts Cross section end view 120 0.27 2.9 Length: 9-1/2 (241) Shipping weight: 1.4 lbs. (0.6 kgs.) 277 0.25 2.5 PERFORMANCE LAMP COMPATIBILITY Emergency Lamp Lumen Output Lamp/Ballast Type Wattage Emergency Operation 24"- 48" T12 (magnetic) 34 – 40 550 U-Lamp T12 (magnetic) 34 – 40 U-Lamp T8 (electronic) 16 – 31 24"- 48" T8 (electronic) 17 – 32 48" T12 (magnetic) 32 – 40 Long Compact (4-pin) 18 – 40 One-lamp emergency operation. Tested and approved lamp/ballast combinations. Consult 250 Lithonia Lighting representative for additional lamp/ballast combination compatibility not shown. Light output data based on F32T8 lamps (2800 lamp lumen rating). Two-lamp electronic instant start ballast. Thermal and ballast factor corrections have been in- cluded. Light output for other lamp and ballast types will vary. Luminaire efficiency and application conditions must be determined to calculate actual illuminance lev- els. Consult Lithonia Lighting representative for further information. KEY FEATURES KEY OPTIONS Self-diagnostics module. Polarized quick-connect Pushnuts and insulation integrated test switch pilot light displacement connectors reduce assembly. installation time. Lithonia Lighting Acuity Lighting Group, Inc. Emergency Lighting Systems Available from www.goodmart.com