Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE SpeciŢ cation grade emergency ballast to operate one or two lamps (4' or shorter) or one 8' lamp. Factory or Ţ eld installed inside or outside (Ţ eld only) ţ uorescent Ţ xture to operate lamp(s) at reduced light output, providing optimum glare-free illumination for a minimum of 90 minutes upon interruption of normal power. Fluorescent Battery Packs CONSTRUCTION Engineering-grade white polycarbonate housing resists impact, scratches and corrosion. UL94V-0 ţ ame rating. Space-saving housing provides extra room for wire routing in ballast channel. PS600 DW Polarized quick-connect pilot light/test switch assembly simpliŢ es installation. Dual-voltage input capability (120V or 277V). Patent pending integrated test switch pilot light that requires only one-hole drilling. U.S. Patent No. 6,522,147. Operates one or two 2' – 4' ţ uorescent T8 – T12 lamps, one 2' – 4' ţ uorescent, HO, VHO, long compact (biax) lamp or one 6' – 8' ţ uorescent T8 – T12 lamp for 90 minutes. Compatible with electronic, rapid start, instant start, slimline, preheat or trigger start ballasts in standard or energy-saving conŢ gurations. Unit wires two ways: on night light circuit (permanently energized) or on switch- able circuit (unswitched circuit to battery charger and switched circuit to the Ţ xture ballast). Unit will strike normally off lamp. ELECTRICAL Constant current-type charger. Capacitive input circuit provides high efŢ ciency and reliable operation. High-efŢ ciency push-pull inverter is the most effective method of converting DC power to AC power. It provides maximum light output, battery life and reliability. Battery: Sealed, maintenance-free, high-temperature nickel-cadmium battery. Ensures long life over wide temperature ranges. Automatic battery recharge after 90-minute discharge. Fully charged after 72 hours. Pilot light and test switch provide visual and manual means of monitoring system LISTING operation. UL listed. Damp location listed. Meets UL 924, NFPA 101 (current Life Safety Code), INSTALLATION NEC and OSHA illumination standards. Mounts concealed within Ţ xture wireway for clean appearance and protection UL approved for installation in sealed and gasketed Ţ xtures. UL approved for against vandalism. Two ½" holes in Ţ xture channel permit mounting of test switch/ installation in wet and damp location listed Ţ xtures, 0-50°C (32-122°F). (Note: DW pilot light behind Ţ xture lens. option does not make the battery pack suitable for mounting outside the Ţ xture in a wet location application.) Compact size (9-1/2" L x 2-1/2" W x 1-1/2" H) allows installation in a variety of ţ uo- rescent troffers, industrials, commercials and strips. WARRANTY Unit mounting centers are identical to a standard ballast. Five-year warranty. ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: PS600 DW SD PS600 DW Accessories* Order as separate items. ELA TSPLP Remote or replacement test switch pilot light; Application Options Designation Mounts up to 25' away from Ţ xture 1 DW Damp/wet SD Self-diagnostics PS600 Battery pack ELA TSPLPSD Remote or replacement test switch pilot light location for self-diagnostics; Mounts up to 25' away from Ţ xture ELA PSRME Remote mounting enclosure ELA PSMKSD External mounting kit for self-diagnostics mod- ule PSSD Field-installable self-diagnostic module NOTE:S 1 Self-diagnostics (PSSD) module ships with ţ uorescent battery pack. See PSSD Inverter * See Accessories speciŢ cation sheets for details on other compatible devices Accessory spec sheet for details on self-diagnostics module. ELA-RTS-TSPLP-PSTS-PSPRSB and ELA-PSMK-PSMKSD-PSDMT-PSRME. Emergency Sheet #: PS600DW PSBP-150 PS600 DW Fluorescent Battery Packs SPECIFICATIONS MOUNTING All dimensions are inches (millimeters). BATTERY Sealed Nickel-Cadmium Shelf Expected Optimum 1 1 2 Voltage life life Maintenance temperature 3 10.8 3 years 7–9 years none 32–100°F 1-1/2 (38) Notes: 1 At 77°F. 2 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed o o information. Damp location models are UL listed 0-50 C (32-122 F). 3 All life safety equipment, including emergency lighting for path of egress must be main- tained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing 2-1/2 (64) could jeopardize the safety of occupants and will void all warranties. Cross section end view ELECTRICAL Length: 9-1/2 (241) Maximum AC input Shipping weight: 1.8 lbs. (0. 8 kgs.) Volts Amps Watts 120 .27 2.2 277 .26 2.2 LAMP COMPATIBILITY PERFORMANCE Lamp Type Wattage Emergency Emergency Lamp Lumen Output Operation 24 – 48" T5 14 – 28 U-Lamp T8 16 – 31 24" – 48" T8 17 – 32 60" – 96" T8 40 – 59 Circline T9 20 – 40 U-Lamp T12 34 – 40 24" – 48" T12 20 – 40 60" – 96" T12 50 – 75 24" – 48" HO T12 35 – 60 60" – 96" HO T12 70 – 110 24" – 48" VHO T12 74 – 115 60" – 96" VHO T12 135 – 215 24" – 48" T5HO 24 – 54 Light output data based on two F40 CW lamps (3050 lamp lumen rating). Two-lamp energy-saving rapid start ballast. Thermal and ballast factor Long Compact (4-pin) 18 – 50 corrections have been included. Light output for other lamp and ballast types will vary. Luminaire efŢ ciency and application conditions must be One-lamp emergency operation for 1 – 4 lamp ballasts. determined to calculate actual illuminance levels. Consult Lithonia Light- Two-lamp emergency operation for 2 – 4 lamp ballasts. ing represenative for further information. KEY OPTIONS KEY FEATURES Polarized quick-connect, integrated Self-diagnostics module. Unique space-saving housing. test switch/pilot light assembly. Lithonia Lighting Emergency Lighting Systems One Lithonia Way, Conyers , GA 30012 Phone: 800-334-8694 Fax: 770-981-8141 Sheet #: PS600DW © 1994-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 7/12/10 www.lithonia.com