Elite.Parts Manufacturers E EDWARDS SIGNALING & SECURITY SYSTEMS SIGA -DH
About product Specifications Features Datasheet FAQ

EDWARDS SIGNALING & SECURITY SYSTEMS SIGA -DH

Image of EDWARDS SIGNALING & SECURITY SYSTEMS SIGA -DH

Description

Edwards Signaling & Security Systems SIGA-DH Systems - Intelligent Duct Smoke Detector Housing 85001-0325

Part Number

SIGA -DH

Price

Request Quote

Manufacturer

EDWARDS SIGNALING & SECURITY SYSTEMS

Lead Time

Request Quote

Category

PRODUCTS - S

Specifications

Addressing Restrictions

Uses one Input Device Address

Agency Approvals

UL, ULC, MEA, CSFM

Compatible Mounting Bases

SIGA-SB Standard Base, SIGA-RB Relay Base, SIGA-IB Isolator Base

Compatible Remote LED

SIGA-LED (LED flashes when in alarm)

Conduit Knockouts

Combination 1/2 inch & 3/4 inch

Controller Compatibility

SIGNATURE Loop Controller

Dimensions

7-3/8 inches (188mm) W x 7 inches (178mm) H x 5 inches (127mm) D

Electrical, Physical Characteristics

Refer to individual detector catalog sheets

Material and Finish

16 Gauge Cold Rolled Steel, Red - Baked Enamel

Pre-alarm Sensitivity

5 % increments, allowing up to 20 pre-alarm settings

User Selected Sensitivity Settings

Least Sensitive: 3.5%; Less Sensitive: 3.0%; Normal: 2.5%; More Sensitive: 2.0%; Most Sensitive: 1.0%

Features

Datasheet

pdf file

Edwards Signaling=SIGA-DH=datasheet1-1006568792.pdf

222 KiB

Extracted Text

05-18-11 EST Catalog u Intelligent Initiating Intelligent Duct Smoke Detector Housing SIGA-DH MEA Overview Standard Features The SIGA-DH Duct Smoke Detector Housing is specially engi- • Suitable for high air velocity duct applications neered to exploit all the capabilities of Signature Series intelligent Up to 4000 ft/min. (20.3 m/sec.) with Photoelectric Detector. photoelectric and multisensor smoke detectors. Edwards Signa- • Standard Signature Series detectors ture Series detectors gather analog information from each of their Designed for use with standard 4D, 3D, and Photoelectric one or more sensing elements and converts it into digital signals. Signature Series smoke detectors. Does not require “special” The detector’s onboard microprocessor measures and analyzes duct smoke heads. these signals. It compares them to historical readings, time pat- • Standard, relay, or isolator detector base terns and known characteristics to make an alarm decision. Digital Detector plugs-in to base then easily installs into housing. filters and complex Algorithms are applied for optimum detector accuracy. Unwanted alarms are virtually eliminated. • Install in ducts up to 10 ft. (3.05 m) wide Each duct housing is packaged with detailed installation instruc- • Remote LED and test station accessories tions, gaskets and a self-adhesive drilling template for locating and • Designed and manufactured to ISO 9001 standards mounting the detector. The large access door is completely re- movable to allow fast detector installation and field wiring connec- tions. The 16 gauge steel housing is finished in red baked enamel for easy identification. Five one-gang knockouts on the housing Typical Wiring provide a convenient location for mounting intelligent Signature The detector mounting bases and test station will accept #18 Series modules. 2 2 2 AWG (0.75mm ), #16 (1.0mm ), #14 AWG (1.50mm ) and #12 2 The SIGA-DH Duct Housing comes with a 6 inch (150 mm) AWG (2.5 mm²) wire sizes. Note: #14 AWG (1.5 mm ) is not exhaust tube. Air sampling tubes are available in lengths from 8 recommended due to difficulty of installation. See Loop Control- inches (200 mm) to 10 feet (3048 mm) and must be ordered sepa- ler and Detector catalog sheets for detailed wiring requirement rately. Compatible smoke detectors, mounting bases, and acces- specifications. sories are listed in the Ordering Information. Refer to individual device catalog literature pages for more detail. Page 1 of 4 D A T A S H E E T 85001-0325 Not to be used for installation purposes. Issue 4 Application Accessories The SIGA-DH Duct Smoke Detector Housing requires a clear, flat, Duct Detector Air Sampling Tubes accessible area on the duct of at least 7-3/8 inches (188mm) W x One air sampling inlet tube must be ordered for each duct smoke 7 inches (175mm) H. The duct housing must be installed on ducts detector housing. Refer to Ordering Information for available at least 8 inches (200mm) wide. To avoid the effects of stratifica- lengths. tion, install the detector housing a minimum of six duct widths Detector Mounting Bases beyond any bends in the duct. Duct detectors are usually installed One detector mounting base must be ordered for each duct on the supply duct after the air filters; or in the return air stream smoke housing. Removing a detector from its base (except isola- prior to being diluted by outside air. tor base) does not affect other devices operating on the same Sample tube length must span the entire width of the air duct and data loop. Available bases are: the tube can be easily cut to any length. Inlet tubes longer than 3 Standard Base SIGA-SB - This is the basic ft.(900mm) must be supported at both ends. mounting base. The SIGA-LED Remote LED is supported by the Standard Base. Relay Base SIGA-RB - This base includes a relay. Normally open or closed operation is selected during installation. The dry contact is rated for 1 amp @ 30 Vdc (pilot duty). The relay’s position is supervised to avoid accidentally jarring it out of position. The SIGA-RB can be operated as a control relay if pro- grammed to do so at the control panel (EST3 V. 2 only). The Relay Base does not support the SIGA-LED Remote LED. Relay bases are not affected or activated by the SIGA-DTS Duct Test Station. Isolator Base SIGA-IB - This base includes a built-in line fault isolator. A detector must be installed for it to operate. The integral Duct detectors continually sample air flow in a HVAC duct and isolator relay is controlled by the detector or the loop controller. A initiate an alarm condition whenever smoke is detected. An alarm maximum of 96 isolator bases can be installed on one loop. The is activated when the quantity (percent obscuration) of combustion Isolator Base does not support the SIGA-LED Remote LED. products in that air sample exceeds the detector’s sensitivity setting. Alarm LED Indicator Air velocity in the duct maintains the air flow that enters the detec- The SIGA-LED Alarm Indicator is suitable for use with tor housing through perforations in the air sampling inlet tube and the SIGA-SB detector base only. A maximum of one discharges through the outlet exhaust tube. The detector housing can be operated for each detector. It features a red must be installed with its INLET air sampling tube upstream of the LED on a one-gang plastic plate and can be installed EXHAUST tube. Before installing the duct detector housing, test remote or directly on the SIGA-DH Duct Housing. the duct air velocity to verify it is within the limits of the Signature smoke detector that is being installed. Also verify that duct air rela- Duct Test Station tive humidity is within 0% and 93%. The SIGA-DTS Duct Test Station uses a key switch along with an integral intelligent input module mounted WARNING: Duct detectors have specific limitations. Duct detec- on a two-gang plastic plate. It is supplied with two tors ARE NOT a substitute for an open area smoke detector. Duct keys and features a red alarm LED. detectors ARE NOT a substitute for early warning detection. Duct detectors ARE NOT a replacement for a building’s regular fire When the key is turned to the “TEST” position, the LED detection system. Smoke detectors ARE NOT designed to detect lights and the integral module remotely inputs a duct toxic gases which can build up to hazardous levels in some fires. detector test alarm. The actions and sequences programmed at These devices WILL NOT operate without electrical power. As the control panel to activate dampers and other smoke control fires frequently cause power interruptions, Edwards suggests you measures, are easily tested. Detector relay bases are not affected discuss further safeguards with your local fire protection specialist. or activated. Resetting the control panel clears the test and returns the system to normal. The key cannot be removed when in the “TEST” position. Installation and Mounting The Duct Test Station mounts to standard 2-inch deep North American two-gang and 4-inch square electric boxes and Euro- Edwards recommends duct detectors always be installed in ac- pean 100 mm square boxes. cordance with the latest recognized editions of local and national fire alarm codes. Air Velocity Test Kit The 6263-SG Air Velocity Test Kit is specially designed to interface to the SIGA-DH Duct Housing. It is used to test or confirm the air velocity in HVAC ducts where the duct housing is installed. Typical Wiring The detector mounting bases and test station will accept #18 2 2 2 AWG (0.75mm ), #16 (1.0mm ), #14 AWG (1.50mm ) and #12 2 AWG (2.5 mm²) wire sizes. Note: #14 AWG (1.5 mm ) is not recommended due to difficulty of installation. See Loop Control- ler and Detector catalog sheets for detailed wiring requirement specifications. Page 2 of 4 D A T A S H E E T 85001-0325 Not to be used for installation purposes. Issue 4 Specifications Compatible Smoke Detectors SIGA-PS SIGA-PHS SIGA-IPHS Ionization Photoelectric - Unipolar Photoelectric Photoelectric Smoke Sensing Element(s) - Light Scattering Principle Heat - - Light Scattering Principle Heat - Light Scattering Principle 135º F (57º C) Fixed Temperature - Alarms at 65º F (35º C) change in ambient temperature 300 to 1000 ft/min. Air Velocity Range 300 to 4000 ft/min. (1.5 to 20.3 m/sec) (1.5 to 5.0 m/sec) Temperature: 32 - 120º F (0 to 49º C) Temperature: 32 - 100º F (0 - 38º C) Operating Environment Humidity: 0 to 93% RH, Humidity: 0 to 93% RH, non-condensing non-condensing Storage Environment Temperature: -4 to 140º F (-20 to 60º C); Humidity: 0 to 93% RH, non-condensing 0.67% to 3.70% ULI/ULC Sensitivity Range 0.67% to 3.77% obscuration/foot (305mm) obscuration/foot (305mm) Dimensions 7-3/8 inches (188mm) W x 7 inches (178mm) H x 5 inches (127mm) D Material and Finish 16 Gauge Cold Rolled Steel, Red - Baked Enamel Conduit Knockouts Combination 1/2 inch & 3/4 inch Agency Approvals UL, ULC, MEA, CSFM User Selected Sensitivity Settings Least Sensitive: 3.5%; Less Sensitive: 3.0%; Normal: 2.5%; More Sensitive: 2.0%; Most Sensitive: 1.0% Pre-alarm Sensitivity 5 % increments, allowing up to 20 pre-alarm settings Electrical, Physical Characteristics Refer to individual detector catalog sheets Compatible Mounting Bases SIGA-SB Standard Base, SIGA-RB Relay Base, SIGA-IB Isolator Base Compatible Remote LED SIGA-LED (LED flashes when in alarm) Controller Compatibility SIGNATURE Loop Controller Addressing Restrictions Uses one Input Device Address Note: The SIGA-DH Duct Housing is not weatherproof or dust tight.) SIGA-DTS Duct Test Housing Operating Current Standby = 250µA; Activated = 400µA Operating Voltage 15.2 to 19.95 Vdc (19 Vdc nominal) Replacement Key p/n - P-037449 Storage and Operating Temperature 32 to 120ºF (0 to 49ºC) Onboard LED Operation Red LED - flashes when in alarm or test state Mounting North American electric box: 2 inch deep 2-gang or 4 inch square ; European electric box: 100 mm square Construction & Finish High Impact Engineered Plastic 2-gang front plate - White Addressing Restrictions Uses one Module Address Page 3 of 4 D A T A S H E E T 85001-0325 Not to be used for installation purposes. Issue 4 05-18-11 Ordering Information Catalog Number Description Ship Wt lb. (kg) SIGA-DH Duct Detector Housing 6.5 (3.0) Detection & alarm since 1872 Sampling Tubes 6261-001 8 inch (200mm) Air Sampling Inlet Tube 0.25 (0.1) U.S. T 888-378-2329 6261-002 24 inch (600mm) Air Sampling Inlet Tube 0.5 (0.2) F 866-503-3996 6261-003 42 inch (1060mm) Air Sampling Inlet Tube 1.6 (0.8) 6261-006 78 inch (1980mm) Air Sampling Inlet Tube 2.2 (1.0) Canada Chubb Edwards 6261-010 120 inch (3048mm) Air Sampling Inlet Tube 4.4 (2.0) T 519 376 2430 F 519 376 7258 Compatible Detectors and Bases SIGA-IPHS 4D Multisensor Detector 0.5 (0.23) Southeast Asia T : +65 6391 9300 SIGA-PHS 3D Multisensor Detector 0.5 (0.23) F : +65 6391 9306 SIGA-PS Photoelectric Detector 0.5 (0.23) SIGA-SB Standard Base 0.2 (0.09) India SIGA-RB Relay Base 0.2 (0.09) T : +91 80 4344 2000 F : +91 80 4344 2050 SIGA-IB Isolator Base 0.2 (0.09)   Australia Annunciation and Testing T +61 3 9239 1200 F +61 3 9239 1299 SIGA-LED Alarm LED Indicator 0.2 (.09) SIGA-DTS Duct Test Station 0.4 (.18) Europe 6263-SG Duct Air Velocity Test Kit T +32 2 725 11 20 F +32 2 721 86 13 Latin America T 305 593 4301 F 305 593 4300 utcfireandsecurity.com © 2010 UTC Fire & Security. All rights reserved. Page 4 of 4 D A T A S H E E T 85001-0325 Not to be used for installation purposes. Issue 4

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the SIGA -DH have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Edwards Signaling & Security Systems SIGA-CR Relay Module - Intelligent analog addressable devices,...

product

Edwards Signaling SIGA-IPHS GE-FIRE Intelligent 4D Multisensor Detector Heat

product

Edwards Signaling & Security Systems SIGAPS Photoelectric Smoke Detector