DIVERSIFIED TECHNOLOGY SPC1000
Specifications
BIOS
DTI Enhanced Phoenix BIOS, Plug-n-Play compliant
Board Type
CompactPCI 6U
CACHE
16KB L1, 256KB L2 integrated on-die
In addition to the 16KB of primary (L1) cache, a 256KB secondary (L2) on-die cache is integrated into the Embedded Pentium III (BGA2) processor.
COMPACTPCI BUS
The SPC1000 is a slave board that uses Intel’s 21554 PCI Non-transparent bridge. This bridge allows communications between the host processor and the
I/O
All SPC1000 I/O connections are routed to the P3 connector for connection to DTI's rearpanel I/O board, the SPI100.
IDE2000 FLASH DRIVE
M-Systems IDE2000 Flash Hard Drive up to 160MB (future expansion up to 320MB) using rear panel I/O SPI100.
IPMI Microcontroller
The SPC1000 includes a field flash upgradeable microcontroller that complies with the IPMI standard. This Microcontroller monitors onboard CPU temperature and system temperature, critical voltages, and CPU fan RPS.
MEMORY
1 bank of 72 bit (168 pin) DIMM, up to 256MB of SDRAM, with ECCSupport
The SPC1000 supports up to 256MB of system memory using one standard 168-pin PC-100 SDRAM DIMM. The BIOS automatically sizes and configures the memory for optimal performance.
PCI BUS SPEED
Host side 33MHz, 32 or 64 bits; Local side 33MHz, 32 bits
PCI ETHERNET
10/100 BASE-T auto-negotiating; Intel 82559 Controller using rear panel I/O SPI100. Remote boot support.
PCI IDE
EIDE support, PIO modes 0 to 4, bootable CD-ROM using rear panel I/O SPI100
PCIVIDEO
C&T 69000 with 2MB Integrated Video Memory using rear panel I/O SPI100
PHYSICAL
6U size board (160mm x 233.35mm), 4HP Support for rear-panel I/O connections using DTI's SPI100 rear-panel I/O module
PROCESSOR
INTEL Embedded Pentium III (BGA2) with support for 100MHz front side bus speeds.
Intel Pentium III
REALTIME CLOCK
Includes 256 bytes CMOS RAM with long life battery
USB
UHCI compatible host controller using rear panel I/O SPI100
Features
- 100MHz FSB
- 32-bit / 33MHz PCI Bus
- BGA2 Processor up to 700 MHz
- Embedded Intel Pentium III
- IDE2000 Flash Drive2 Floppy Ports and 1 Serial Port
- Intel 440BX Chipset with
- PCI 10/100 Base-TX Ethernet
- PCI Video
- Rear USB Port
- System Monitor
- Up to 256 MB of SDRAM
Datasheet
Extracted Text
CompactPCI Single Board Computer SPC1000 • Embedded Intel Pentium III BGA2 Processor up to 700 MHz • Intel 440BX Chipset with 100MHz FSB • 32-bit / 33MHz PCI Bus • Up to 256 MB of SDRAM • PCI Video • PCI 10/100 Base-TX Ethernet • IDE2000 Flash Drive • 2 Floppy Ports and 1 Serial t • Rear USB Port • System Monitor :SPECIFIC PROCESSORKREA INTEL Embedded Pentium III (BGA2) with support for 100MHz frontIncludes 256 bytes CMOS RAM with long life battery side bus speeds. PHYSICAL Y6U size board (160mm x 233.35mm), 4HP Support for rear-panel I/O 1 bank of 72 bit (168 pin) DIMM, up to 256MB of SDRAM, with ECCconnections using DTI's SPI100 rear-panel I/O module Support Y CACHEThe SPC1000 supports up to 256MB of system memory using one standard 16KB L1, 256KB L2 integrated on-die168-pin PC-100 SDRAM DIMM. The BIOS automatically sizes and configures the memory for optimal performance. PCI BUS SPEED Host side 33MHz, 32 or 64 bits; Local side 33MHz, 32 bitsCACHE In addition to the 16KB of primary (L1) cache, a 256KB secondary (L2) on-die BIOS cache is integrated into the Embedded Pentium III (BGA2) processor. DTI Enhanced Phoenix BIOS, Plug-n-Play compliant TPCI BUS PCI IDE The SPC1000 is a slave board that uses Intel’s 21554 PCI Non-transparent EIDE support, PIO modes 0 to 4, bootable CD-ROM using rear panel I/O bridge. This bridge allows communications between the host processor and the SPI100 SPC1000 through memory and/or I/O windows. Software support through Hard Hat Linux’s Hart Net Package.PCI ETHERNET 10/100 BASE-T auto-negotiating; Intel 82559 Controller using rear panel H.110 CT Bus System Interface I/O SPI100. Remote boot support. OKI ML53812-2 H.110 CT Bus System Interface and Time Slot Inerchange. Up to 512 programmable connections (256 transmit and 256 receive) to any of thePCIVIDEO 4096 time slots on the H.110 CT Bus.C&T 69000 with 2MB Integrated Video Memory using rear panel I/O SPI100 IPMI Microcontroller The SPC1000 includes a field flash upgradeable microcontroller that compliesUSB with the IPMI standard. This Microcontroller monitors onboard CPU tempera-UHCI compatible host controller using rear panel I/O SPI100 ture and system temperature, critical voltages, and CPU fan RPS. IDE2000 FLASH DRIVE I/OM-Systems IDE2000 Flash Hard Drive up to 160MB (future expansion up All SPC1000 I/O connections are routed to the P3 connector for connection toto 320MB) using rear panel I/O SPI100. DTI's rearpanel I/O board, the SPI100. m 7 1.800.443.266 www.dtims.co COMPAC MEMOR MEMOR LTIME CLOC ATIONS Por SPC1000 CompactPCI Single Board Computer SPC1000 The SPC1000 is a slave board computersto extended VGA mode. designed to fit into a single cPCI peripheral slot.provided for full duplex operation, allowing effec-The SPC1000 supports a CT812 time slot inter- The SPC1000 features the latest Intel CPU, thetive data rates to reach 20 Mbps and 200 Mbps,face using the OKI ML53812-2 Chip. The Embedded Pentium III (BGA2), in a CompactPCI r- form factor. The SPC1000 is based on Intel’sThe SPC1000 also features an IPMI (Intelligentx 440BX chipset. One standard 168-pin DIMMPlatform Management Interface) Microcontrollern socket is provided to support up to 256MB of sys-t-e tem memory. DIMM sizes from 1MB x 72 toage, temperature, and fan operation. A dedicatedCT Bus. The ML53812 runs in both 4MHz and 32MB x 72 are supported, giving a memory rangeserial port is included allowing the IPMI8MHz SC Bus modes and supports the switching from 8MB to 256MB. SDRAM memory is sup-Microcontroller to transfer data and diagnosticfeatures needed to integrate CT Bus devices with ported. Single-bit error correction (ECC) is avail-r0 able using standard parity DIMMs.h. s-the IPMB (Intelligent Platform Management Bus)The SPC1000 is designed for operation in .interface. The IPMI Microcontroller is fully inde-CompactPCI passive backplane systems. All During the boot process, the Host processor allo-.pendent of the SPC1000 power circuitrySPC1000 I/O connections are routed to the P3 con- cates a memory and I/O window for communica-A PCI EIDE controller on the SPC1000 gives, sexcellent performance with all high speed IDEthe SPI100. DTI offers several CompactPCI back- ddrives and also supports 32-bit access, LBA mode,plane choices. Call factory for details. from the SPC1000. Hard Hat Linux supports theand bootable CD-ROM’s. Standard ISA bus Non-transparent PCI Bridge through the Hard Netperipherals like a PS/2 keyboard/mouse controller, package. Installing this package, allows the HostReal Time Clock, floppy controller, RS-232 serial CPU to communicate to the SPC1000 using stan-e- dard network protocols.grated onto the SPC1000. All products are shipped FOB factory (MS). A Intel 82559 Ethernet controller is integratedThe SPC1000 provides enhanced 3D graphics Specifications subject to change without notice. onboard. This PCI ethernet interface provides aperformance by utilizing a C&T 69000 video con- Trademarks are the property of their respective owners. fully auto-negotiating 10 Base-T / 100 Base-TXr. The video controller provides desktopCopyright 2001 by Diversified . connection over standard UTP-5 data grade twist-graphics with full feature high end performance upAll rights reserved. For more information or to orde.r, please contact us mww 7 476 Highland Colony Parkway • Ridgeland, MS 39157 1.800.443.266 w.dtims.co Technology trolle port, and field upgradable Flash BIOS are also int this window to pass application specific data to an tion to the SPC1000. The Host processor then use nector for connection to DTI’s rear-panel I/O board sor using Intel’s 21554 PCI Non-transparent bridge The SPC1000 communicates to the Host proce devicescan also communicate to the host processor throug 4MHz SC Bus, 8MHz SC Bus and 2MHz MVIP-9information to the CPU. The IPMI Microcontrolle its parent device to any of the 4096 time slots on thfor monitoring of system critical variables like vol 4096 time slot switch, interfacing up to 512 ports o operability specification. It is a non-blocking 512 ML53812-2 takes full advantage of the H.110 interespectively. ed-pair cable up to 100 meters in length. Support i
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SPC1000 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Diversified Technology cPB-4325 PICMG 2.16 Pentium III, serverworks LE-T chipset, PCI video, 2x Gbe ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods