process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev. 06.18.10_139 NFS110-M Series 1 of 5 652 NFS110 Medical Series Single and quad output Total Power: 80 - 110 W Input Voltage: 90 - 253 Vac 127 - 357 Vdc # of Outputs: Single, quad Electrical Specifications Output Voltage adjustability: +5.1 V o/p on multi’s ± 3.0% Special Features 5.1 V single output ± 3.0% • 7.0 x 4.25 x 1.8 inch package 12 V single output 12 - 14 V • Medical, dental and 15 V single output 15 - 18 V laboratory applications 24 V single output 24 - 30 V • Overvoltage and short circuit Line regulation: LL to HL, FL ± 0.1% max. protection All outputs on all units • 110 W with 20 CFM Overshoot/undershoot: • UL, VDE and CSA safety At turn-on no lead 0% approvals Temperature coefficient: All outputs ±0.02% / °C • EN60601-1 and UL2601 Overvoltage protection: Multi o/p 5.1 V only 6.25 V ± 0.75 V medical approvals 5.1 V single 6.25 V ± 0.75 V • Available RoHS compliant 12 V single 15.75 V ± 1.0 V • 2 year warranty 15 V single 22 V ± 1.5 V 24 V single 33 V ± 2.5 V Output power limit: Primary power Pin max. 160 W limited Pout min. 110 W Burst mode operation Short circuit protection: Input Safety Input voltage range: 90 - 253 Vac • VDE0805/EN60601-1/ 127 - 357 Vdc • IEC60601/IEC1010 Input frequency range: 47 - 440 Hz • File No. 10401-3336-1049 • Licence No. 2874 Input surge current: 110 Vac. 50 Hz 17 A • UL60601-1 File No. E182560 230 Vac. 50 Hz 25 A • CSA C22.2 No. 125 Safety ground leakage current: 132 Vac 50 µA • File No. LR41062C 264 Vac 100 µA All specifications are typical at nominal input, full load at 25 °C unless otherwise stated process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 06.18.10_139 NFS110-M Series 2 of 5 652 EMC Characteristics Conducted emissions: EN55022, FCC part 15 Level A Radiated emissions: EN55022, FCC part 15 Level A ESD air: EN61000-4-2, level 3 Perf. criteria 1 ESD contact: EN61000-4-2, level 4 Perf. criteria 1 Surge: EN61000-4-3, level 3 Perf. criteria 1 Fast transients: EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity: EN61000-4-5, level 3 Perf. criteria 2 EN61000-4-6, level 3 Perf. criteria 2 Conducted immunity: General Specifications Hold-up time: 110 Vac @ 80 W 35 ms 110 Vac @ 110 W 17 ms 230 Vac @ 80 W 140 ms 230 Vac @ 110 W 100 ms Efficiency: Multiple outputs 70% typical +5.1 V single 70% typical 12 V and 15 V singles 72% typical 24 V single 75% typical Isolation voltage: Input/output 4000 Vac Input/chassis 1500 Vac Approvals and standards: VDE0750, IEC60601, IEC1010, UL60601, (see note 12) CSA C22.2 No. 125 Weight: Singles 550 g (19.4 oz) Multiple outputs 600 g (21.2 oz) MTBF (@25 ºC) MIL-HDBK-217E 125,000 hours min. Environmental Specifications Thermal performance: Operating, see curve 0° C to +70 °C (See notes 9, 10) Non-operating -40 °C to +85 °C 0 °C to 50 °C amb. convection cooled 80 W +50 °C to +70 °C, Derate 2 W/°C amb. convection cooled 0 °C to +50 °C, 20 CFM forced air 110 W +50 °C to +70 °C, 20CFM forced air Derate 2.75 W/°C Peak, 0 °C to +50 °C, max. 60 seconds 110W Relative humidity: Non-condensing 5% to 95% RH Altitude: Operating 10,000 feet max. Non-operating 40,000 feet max. Vibration (See Note 11): 5-500 Hz 2.4 G rms peak process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 06.18.10_139 NFS110-M Series 3 of 5 652 Ordering Information Output Currents Output Total (4) (13, 14, F) Ripple Model Numbers (1) (2) (3) Max Peak Fan (5) Voltage Regulation +5.1 V 8 A 20 A 10 A 50 mV ± 2.0% NFS110-7901PJ +12 V 4.5 A 9 A 5 A 120 mV ± 3.0% –12 V 0.5 A 1.5 A 1 A 120 mV ± 3.0% –5 V 0.5 A 1.5 A 1 A 50 mV ± 3.0% +5.1 V (I ) 8 A 20 A 10 A 50 mV ± 2.0% NFS110-7902PJ A (6) +24 V (I ) 3.5 A 4.5 A 4.5 A 240 mV +10/–5.0% B +12 V 4.5 A 9 A 5 A 120 mV ± 3.0% –12 V 0.5 A 1.5 A 1 A 120 mV ± 3.0% (7,8) 12 V 7 A 9 A 9 A 120 mV ± 2.0% NFS110-7912J (7,8) 15 V 5 A 7.3 A 7.3 A 150 mV ± 2.0% NFS110-7915J (7,8) 24 V 3.5 A 4.5 A 4.5 A 240 mV ± 2.0% NFS110-7924J Notes Transient Response 1 Convection cooled, 80 W maximum. NFS110-7901PJ +5.1 V (7.5-10 A) 150 mV peak, 2 Peak outputs lasting less than 60 seconds with duty cycle less than 10%. Total 1 ms recovery peak power must not exceed 110 W. 3 Forced air, 20 CFM at 1 atmosphere, 110 W maximum. +12 V (2.5-5 A) 100 mV peak, 4 Figure is peak-to-peak. Output ripple is measured across a 50 MHz bandwidth 0.5 ms recovery using a 12 inch twisted pair terminated with a 47 µF capacitor. 5 Total regulation is defined at the static output regulation at 25 °C, including -12 V (0.5-1 A) 100 mV peak, initial tolerance, line voltage within stated limits and output voltages adjusted 0.5 ms recovery to their factory settings. Also for NFS110-7902PJ, for 24 V output stated regulation I / I ² 5. This output will maintain ±5.0% regulation if A B -5 V (0.5-1 A) 100 mV peak, I ² 5 A, where I = +5.1 V output current and I = +24 V output current. A A B 0.5 ms recovery 6 Single output models have floating outputs which may be referenced as either positive or negative. Higher voltage supplies, may be adjusted over a wide NFS110-7902PJ +5.1 V (7.5-10 A) 150 mV peak, output voltage range, as long as the total output power does not exceed 80 1 ms recovery Watts (natural convection) or 110 Watts (forced air). +12 V (2.5-5 A) 100 mV peak, 7 Power fail detect not available on single output models. 0.5 ms recovery 8 Derating curve is application specific for ambient temperatures > 50 °C, for optimum reliability no part of the heatsink should exceed 90 °C and no -12 V (0.5-1 A) 100 mV peak, semiconductor case temperature should exceed 100 °C. 0.5 ms recovery 9 Caution: Allow a minimum of 1 second after disconnecting the power when making thermal measurements. 24 V (1.5-3 A) 300 mV peak,1 10 The user should read the PSU installation instructions in conjunction with the ms recovery relevant national safety regulations in order to ensure compliance. 11 Three orthogonal axes, random vibration, 10 minute test for each axis. NFS110-7905J +5.1 V (10-20 A) 250 mV peak, 12 This product is only for inclusion by professional installers within other 1 ms recovery equipment and must not be operated as a stand alone product. NFS110-7912J +12 V (4.5-9 A) 360 mV peak, 13 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE 1 ms recovery RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NFS110-7915J +15 V (3.65-7.3 A) 450 mV peak, 14 NOTICE: Some models do not support all options. Please contact your local 1 ms recovery Emerson Network Power representative or use the on-line model number search tool at http://www.Emerson.com/EmbeddedPower to find a suitable NFS110-7924J +24 V (2.25-4.5 A 720 mV peak, alternative. 1 ms recovery process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 06.18.10_139 NFS110-M Series 4 of 5 652 OPTIONAL POWER FAIL DETECT TIMING DIAGRAM AC (J1) mating connector Power fail detect signal (Note 8) Molex 09-50-3051 or Molex 09-91-0500 mating connector with 2478 50ms ≤ T1 ≤ 200ms AC INPUT or equivalent crimp terminals. T2 will vary with line and load 4.75V 4.75V 5V OUTPUT T3 ≥ 3ms HIGH Pout: 110W 3.5V MIN DC (J2) mating connector LOW PFD SIGNAL PFD output is an open collector which 0-0.4 MAX Molex 09-50-3131 or Molex 09-91-1300 mating connector with 2478 T3 will sink ≤ 40mA in the low state. T2 T1 or equivalent crimp terminals. 0.475 0.010 (12.07) 1.80 (45.72) MAX 1.00 0.005 (25.4) DERATING CURVE (See Notes 9, 10) 6-32 UNC Output Power (Watts) 0.050 0.020 1.55 0.005 3.35 0.015 (85.09) (4PL) (39.37) (1.27) 110W PIN 1 20 CFM FORCED AIR COOLING Voltage Adjust 80W Optional Power Fail J2 Detect Circuit 4.250 0.020 (Key = Pin 2) NATURAL 55W (107.95) CONVECTION COOLING T1 40W T1 3.750 Pin 1 0.005 (95.25) PIN 1 L1 11W 11W MINIMUM LOAD REQUIRED AT 230VAC 0.156 J1 0W DIA. HOLE C6 0C 10C 20C 30C 40C 50C 60C 70C (4PL) F1 5A, 250 VAC 0.250 6.50 0.005 (165.1) 0.010 (6.35) 7.00 0.020 (177.8) Pin Connections 0.250 0.010 J1 -7901PJ -7902PJ SINGLES ALL DIMENSIONS IN INCHES (mm) (6.35) Pin 1 AC Ground AC Ground AC Ground Pin 2 AC Neutral AC Neutral AC Neutral Mechanical Notes Pin 3 AC Line AC Line AC Line A Metallic or non-metallic stand-offs (maximum diameter 5.4mm) can be J2 used in all four mounting holes without effecting safety approval. B The ground pad of the mounting hole near J1, allows system grounding Pin 1 +5.1 V +5.1 V V out through a metal stand-off to the system chassis. C The heat sink is grounded, and allows system grounding by mechanical Pin 2 +5.1 V +5.1 V V out connection to the system chassis. Pin 3 +5.1 V +5.1 V V D The supply must be mechanically supported using the PCB mounting out holes and may be additionally supported by the heatsink mounting Pin 4 Return Return Return holes. E It is always advisable to attach the power supply heat sink to another Pin 5 Return Return Return thermal dissipator (such as a chassis or finned heatsink etc). The resulting decrease in heat sink mounted component temperatures will Pin 6 Return Return Return improve power supply lifetime. Pin 7 Return Return Return F A standard L-bracket and cover is available for mounting which contains all screws, connectors and necessary mounting hardware. The kit is Pin 8 +12 V +12 V V available, order part number “NFS110CJ” . out Pin 9 +12 V +12 V V out Pin 10 PFD PFD N/C Pin 11 -12 V -12 V N/C Pin 12 Removed for Key Pin 13 -5 V +24 V N/C N/C = no connection. process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev. 06.18.10_139 NFS110-M Series 5 of 5 Americas 652 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.