Dual-Core Intel® Xeon® Dual Processor Single Board Computer RoHS 2002/95/EC APPLICATIONS The PP 421/23x is a PC-compatible high performance be further increased through the use of PMC or XMC based CompactPCI® processor board supporting two modules. High-performance networking is provided by Dual-Core Intel® Xeon® processors. Featuring a four Gigabit Ethernet links and the board is fully selection of memory options, an optional on-board hard compliant with the PICMG® 2.16 (Packet Switching disk drive and a variety of interfaces, the board is Backplane) specification. To simplify the board’s suitable for a range of high-performance applications integration many popular industry standard operating within the industrial control, telecomms, telemetry, systems are supported. Full system monitoring is scientific and aerospace markets. Its functionality can provided by the PICMG 2.9 compliant IPMI interface. HIGHLIGHTS � Dual-processor configuration: � CompactPCI controller: - using 1.66 GHz Dual-Core Intel Xeon processor ULV - operates in system slot - 667 MHz Front Side Bus - operates in peripheral slot - Intel® Core™ processor architecture - 32/64-bit at 33/66 MHz CompactPCI interface - on-die L1 cache � Option to bypass CompactPCI bus (Satellite Mode) - 2 Mbytes on-die shared L2 cache for each processor � IPMI (Intelligent Platform Management Interface): - no CPU fan required - PICMG 2.9 (System Management Specification) � Up to 8 Gbytes DDR2-400 SDRAM (with ECC) � High resolution graphics interface � 1 x PMC module interface, with front and rear user I/O: � Keyboard and mouse interfaces - 32/64-bit; 33/66MHz PCI and 66MHz PCI-X � 4 x USB ports - 1 x XMC module interface (x8 PCI Express™) � High performance EIDE interfaces with optional on-board � 2 x asynchronous RS232 serial channels disk drive or CompactFlash™/Microdrive™ interface (in a � Watchdog timer single-slot) � Optional Transition Module for rear panel I/O � 2 x Serial ATA150 (SATA) channels � Support for Linux®, Windows Server 2003™, Windows® XP, � 4 x 10/100/1000Mbps Ethernet interfaces: Windows® 2000 and QNX® - Dual Gigabit Packet Switching Backplane (PICMG 2.16) � 1 Mbyte of BIOS Flash EPROM 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processors 1x 1x VGA 2 x Ethernet PMC RS232 USB Graphics 10/100/1000Mbps Interface � dual processors; for each processor:- � 1.66 GHz Dual-Core Intel® Xeon® processor ULV Silicon 4x Keyboard Mouse Intel Motion USB 2.0 Interface Interface 82571EB � internal primary (L1) on-die cache SM722 � 2 Mbytes secondary (L2) shared on-die x4 cache � Intel® Core™ Microarchitecture x8 BIOS Real-Time Intel Intel Flash � no CPU fan required Clock 6300ESB E7520 EPROM PCIX-66 � utilizes 64-bit Intel® E7520 chipset:- 3V � supports 667 MHz processor bus to give x1 x1 Dual-Core Dual-Core peak bandwidth of 5.3 Gbytes/s 2 x Serial Intel Xeon Intel Xeon DDR2 Interfaces CF Processor Processor SDRAM or TM � uses Intel® 6300ESB I/O Controller Hub DRAM PCI-X 2x EIDE Intel Intel IPMI to PCI � supports up to 8 Gbytes DDR2-400 ECC SATA Interface 82573L 82573L Bridge SDRAM:- � up to 4 Gbytes soldered to board � up to 4 Gbytes provided via two 200-pin 3x Mouse IPMB0 & 2 x Ethernet (PSB) PMC DVI-D 2x USB IPMB1 Graphics 10/100/1000Mbps Rear I/O SODIMM sockets RS232 KBD SATA150 EIDE CompactPCI = PCI Express � dual channel configuration � peak bandwidth of 6.4 Gbytes/s Serial Interfaces Flash EPROM � error correction up to 4-bits � 2 x RS232 serial channels:- � 1 Mbyte of BIOS Flash EPROM - 8-bits wide � accessible from processors and CompactPCI bus � one channel accessed via J3 to the Software Support Hard Disk Interfaces Transition Module and front panel � support for Linux, Windows Server 2003, � EIDE interface:- � one channel accessed via J5 to the Windows XP, Windows 2000 and QNX � supports up to Ultra-DMA 100 for high Transition Module performance drives � 16550 compatible UART IPMI � 2 x channels (primary and secondary) � supports CTS, RTS, RI, DSR, DTR and DCD � PICMG 2.9 R1.0 (System Management � secondary channel can be used for on-board Specification) 2.5 inch disk drive or up to 2 Other Peripheral Interfaces � implements the IPMB0 and IPMB1 interfaces CompactFlash™ or Microdrive™ Type II � keyboard and mouse interfaces, sharing a � on-board Baseboard Management Controller drives single PS/2™ type connector on front panel � supports 32 Kbytes of non-volatile memory and accessible via J3 to the Transition Module � on-board options occupy the PMC site � primary channel accessed via J3 to the � PC-compatible Real Time Clock (Year-2000 Electrical Specification Transition Module compliant) � +5V@4.0A (typical with 2 Gbytes DRAM); � Serial ATA interfaces:- � 3 x USB 2.0 interfaces accessed via J5 to the +5% / -3% Transition Module � 2 x channels accessible via J5 � +3.3V@7.0A; +5% / -3% � transfer speeds up to 150 Mbytes/s � 1 x USB 2.0 interface via front panel � +12V@0.02A; -12V@0.01A � watchdog timer � +12V and -12V routed to PMC expansion slot Ethernet Interfaces � system fan monitor; two CPU temperature � 4 x channels supporting 10Base-T, 100Base-TX, Safety monitors; voltages monitor; board temperature 1000Base-T � PCB (PWB) manufactured with flammability monitor:- � front panel interfaces:- rating of 94V-0 � all accessible via IPMI � implemented by an Intel® 82571EB LAN � legacy speaker interface Environmental Specification controller via a x4 PCI Express™ link � 0°C to +55°C (operating) � accessed via front panel RJ45 connectors CompactPCI Interface � 10% to 90% Relative Humidity � rear I/O interfaces:- � compliant with PICMG 2.0 R3.0; 3.3V and 5V (operating non condensing) signaling levels:- � implemented by 2 x Intel® 82573L LAN � -40°C to +85°C (storage) controllers via x1 PCI Express links � universal signaling supported � 10% to 90% Relative Humidity � support for PICMG 2.16 - Packet Switching � 33/66 MHz; 32/64-bit interface accessed via Backplane (PSB) (storage non-condensing) J1/J2 connectors � optional support for rear panel RJ45’s via J3 � utilizing a PCI-X to PCI bridge for off-board Mechanical Specification to the Transition Module accesses � 6U form-factor: 9.2inches x 6.3inches � PICMG 2.1 R2.0 Hot Swap Specification Graphics Interface (233mm x 160mm) Compatible as hot swap controller only � implemented by a Silicon Motion SM722:- � single-slot: 0.8 inches (20.3mm) � J4 connector not fitted � 8 Mbytes video memory � connectors: IEC-1076-4-101 for J1-J5 � operates as a System Slot controller or in a � resolution up to 1280 x 1024 @ 16M colors � shock: peripheral slot � analog interface via front panel connector 20g, 11ms, ½ sine (operating); � option to disable CompactPCI interface 30g, 11ms, ½ sine (non-operating) � DVI-D interface supported via J3 (Satellite Mode):- � vibration: � use in any slot PMC Interface 5Hz-2000Hz at 2g, 0.38mm peak displacement � receives power from CompactPCI bus � 1 x PMC site:- (operating); � board can be hot swapped in this mode � 3.3V signaling 5Hz-2000Hz at 5g, 0.76mm peak displacement � supports 32/64-bit, 33/66 MHz PCI and (non-operating) Firmware Support 66 MHz PCI-X operation � Phoenix® TrustedCore™ � XMC (PCI Express Mezzanine Card) interface � comprehensive Power-On Self-Test (POST) supported via x8 or dual x4 PCI Express Link � LAN boot firmware included � I/O via front panel and via J5:- � Transition Module supports rear I/O ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 421/231-xy 1.66 GHz Dual-Core Xeon, dual processors where x = where y = 4 - 6 Gbytes 5 - 8 Gbytes For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1543/0207 Specification subject to change; E and OE. RoHS 2002/95/EC compliant © Concurrent Technologies 2007 PCI-33 XMC PMC Module