® ® Intel Pentium M Processor Intelligent Dual PMC Carrier APPLICATIONS The PP 310/011-E is a PC-compatible high performance, Full system monitoring is provided by the PICMG 2.9 high functionality, dual PMC CompactPCI® board sup- compliant IPMI interface. To simplify the board’s inte- porting the 1.1 GHz Intel® Pentium® M Processor. The gration many popular industry standard operating sys- PP 310/011-E will operate in a system slot, a peripheral tems are supported. The PP 310/011-E is suitable for a slot or independently from the CompactPCI bus. range of high-performance applications within the in- High-performance networking is provided by two Giga- dustrial control, telecomms, telemetry, scientific and bit Ethernet links, and the board is compliant to the aerospace markets. The board is plug compatible with PICMG® 2.16 specification. the PP 110/01x family. HIGHLIGHTS � Operation over ambient temperature range � CompactPCI controller: -25°C to +70°C - operates in system slot or peripheral slot - 32/64-bit CompactPCI interface � 1.1 GHz Intel Pentium M Processor: - 64 Kbytes L1 cache - 33/66 MHz operation - 1 Mbyte L2 cache � Option to bypass CompactPCI bus (Satellite Mode) - no CPU fan needed; low power processor � IPMI (Intelligent Platform Management Interface): � Single slot (for all option combinations) - PICMG 2.9 (System Management Specification) � � Up to 3 x RS232 serial channel interfaces: Up to 2 Gbytes of DDR DRAM (with ECC) - 1 or 2 on-board � 2 x PMC module interfaces (32/64-bit and 33/66 MHz) - 2 on optional Transition Module � High performance EIDE interfaces with optional on-board � Watchdog timer CompactFlash™ interface � Commercial temperature version available: � 2 x 10/100/1000Mbps Ethernet interfaces - see PP 310/01x datasheet � Dual 1 Gbps Packet Switching Backplane (PICMG 2.16) � Support for VxWorks®, Windows NT®, Windows® 2000, � Graphics interface Windows® XP, Windows® XP Embedded, QNX® and � 32 Mbytes of Application Flash EPROM Linux® � Keyboard and Mouse interfaces � Optional Transition Module for rear panel I/O: - 2 x RS232 channels, Parallel Printer Port, 2 x � 512 Kbytes of BIOS Flash EPROM Ethernet, EIDE and Floppy Disk interfaces included 4 Gilberd Court, Colchester, Essex CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Graphics PMC PMC 1 x Ethernet � 1.1 GHz Intel® Pentium® M processor:- 1 x RS232 Interface Interface Interface 10/100/1000Mbps � 1.1 GHz uses �FC-BGA 479 (micro Flip-Chip Ball Grid Array) package 2 x Serial Keyboard Mouse � 64 Kbytes of primary (L1) on-die cache SM722 Interface Interface Interface � 1 Mbyte of secondary (L2) on-die cache 32-bit � 400 MHz Front Side Bus (FSB) PCI Bus 3V BIOS Flash Bridge High Speed Link � no CPU fan EPROM Real-Time � utilizes 64-bit ServerWorks’ GC-LE chipset Clock � provision for ITP debug port Pentium M ServerWorks Intel Processor GC-LE 82546EB Application 64-bit IPMI Flash PCI Bus EPROM � supporting up to 2 Gbytes DDR ECC SDRAM:- DDR � up to 2 Gbytes provided via two SODIMM S-DRAM sockets Low Pin EIDE USB Count Interface � error correction up to 4-bits Interface PCI CF Bridge � accessible from Intel Pentium M processor TM or CompactPCI bus Hard Disk Interfaces 1 x RS232 IPMB 1xUSB PMC 2 x Ethernet (PSB) Optional 2x Rear I/O 10/100/1000Mbps � EIDE interface:- Printer RS232 EIDE Transition Module CompactPCI � supports up to Ultra-DMA 100 for high performance drives � two channels (primary and secondary) � primary channel is accessible via � system fan monitor; CPU temperature IPMI Transition Module monitor; voltages monitor:- � PICMG 2.9 R1.0 (System Management � secondary channel can be used for � all accessible via IPMI Specification) on-board dual CompactFlash module � speaker interface � implements the IPMB0 interface � 1 x USB (Universal Serial Bus) interface via Ethernet Interfaces � on-board BMC (Baseboard Management J5 Transition Module � implemented by Intel 82546EB LAN Controller) � 1 x 32-bit Long Duration Timer with Controller via 64-bit PCI bus � supports 8 Kbytes of non-volatile memory processor interrupt capability � two channels supporting 10 Base-T, 100 � LPC (Low Pin Count) bus via J5 to enable Electrical Specification Base-TX, 1000 Base-T:- the AD PP5/001 Transition Module support � +5V@2.0A (typical at 1.1 GHz with 512 � support for PICMG 2.16 R1.0 - Packet for:- Mbytes DRAM); +5% / -3% Switching Backplane (PSB) � floppy disk interface � +3.3V@6.5A; +5% / -3% � optional support for rear panel RJ45’s via � parallel printer port interface (ECP, EPP � +12V@0.010A; -12V@0.010A Transition Module and IEEE1284) � +12V and -12V routed to PMC expansion � one channel switchable to front panel RJ45, � 2 x RS232 serial channels slots supports 10 Base-T, Flash EPROMs 100Base-Tx and 1000Base-T Safety � 32 Mbytes of Application Flash EPROM - � PCB (PWB) manufactured with flammability Graphics Interface 8-bits wide rating of 94V-0 � implemented by a Silicon Motion SM722 � 512 Kbytes of BIOS Flash EPROM - 8-bits providing:- Environmental Specification wide � 8 Mbytes video memory � -25°C to +70°C (operating); for commercial Firmware Support temperature see PP 310/01x � resolutions up to 1280 x 1024; � Phoenix ServerBIOS™ � 10% to 90% Relative Humidity, supporting up to 16M colors � comprehensive Power-On Self-Test (POST) non-condensing (operating) � accessed via a 26-way high-density � LAN boot firmware included � -40°C to +70°C (storage) connector on front panel � 10% to 90% Relative Humidity, Software Support PMC Interface non-condensing (storage) � support for VxWorks, Windows NT, Windows � 2 x PMC sites; for both sites:- 2000, Windows XP, Windows XP Embedded, Mechanical Specification � I/O via front panel QNX and Linux � 6U form-factor: 9.2inches x 6.3inches � I/O via J3 and J5 (233mm x 160mm) CompactPCI Interface � 32/64-bit, 33/66 MHz PCI operation � single-slot: 0.8inches (20.3mm) � compliant with PICMG 2.0 R3.0; 3.3V or 5V � 3.3V or 5V signaling levels � connectors: IEC-1076-4-101 for J1-J5 signaling levels:- � shock: � Transition Module provides rear I/O for both � universal signaling support 20g, 11ms, ½ sine (operating); PMC sites � 33/66 MHz; 32/64-bit interface accessed 30g, 11ms, ½ sine (non-operating) Serial Interfaces via J1/J2 connectors � vibration: � up to 3 x RS232 serial channels:- � utilizing a PCI-PCI bridge for off-board 5Hz-2000Hz at 2g, 0.38mm peak � 1 channel via a 26-way high-density accesses displacement (operating); � operates as a System Slot controller or in a 5Hz-2000Hz at 5g, 0.76mm peak connector on front panel Peripheral slot displacement (non-operating) � either 1 channel via J5 or 2 channels via � PICMG 2.1 R2.0 Hot Swap Specification optional Transition Module compatible � 16550 compatible UART � option to disable CompactPCI interface � channels support RI, CTS, RTS, DSR, DTR and (Satellite Mode):- DCD � receives power from CompactPCI bus Other Peripheral Interfaces � board can be hot swapped in this mode � keyboard and mouse interfaces accessed via � J4 connector not fitted a 26-way high-density connector on front panel � PC-compatible Real Time Clock (Year 2000 compliant) � watchdog timer ORDERING INFORMATION Order Number Product Description (Hardware) M Processor AD PP5/001-xx Transition Module AD 200/001-00 CompactFlash carrier assembly AD HSC/001-02 Board Hot Swap cover (rear mounting) CB 26D/124-00 26-way HD to VGA, Keyboard, Mouse, RS232 connector cable For commercial temperature version see PP 310/01x datasheet All companies and product names are trademarks of their respective organizations. Datasheet Code 1457/0604 Specification subject to change; E and OE. © Concurrent Technologies 2004 PMC Module PMC Module 64-bit PCI Bus