Dual Intel® Xeon™ Processors Single Board Computer APPLICATIONS The PP 220/11x is a blank panel version of the aerospace markets. High-performance networking is PP 220/01x, a PC-compatible high performance based provided by dual Gigabit Ethernet links and the board CompactPCI® processor board supporting two Low Volt- is fully compliant with the PICMG® 2.16 (Packet age Intel® Xeon™ processors. Featuring a selection of Switching Backplane) specification. To simplify the memory options, an optional on-board hard disk drive board’s integration many popular industry standard and a variety of interfaces, the board is suitable for a operating systems are supported. Full system moni- range of high-performance applications within the in- toring is provided by the PICMG 2.9 compliant IPMI in- dustrial control, telecomms, telemetry, scientific and terface. HIGHLIGHTS � Dual 2.0 GHz Low Voltage Intel Xeon processors: � CompactPCI controller: - Intel® Pentium® 4 processor architecture - Operates in system slot or peripheral slot - on-die L1 cache - 32/64-bit at 33/66 MHz CompactPCI interface - 512 Kbytes on-die L2 cache � Option to bypass CompactPCI bus (Satellite Mode) - hyper threading, Netburst™ Microarchitecture � IPMI (Intelligent Platform Management Interface): - no CPU fan required - PICMG 2.9 (System Management Specification) � Up to 4 Gbytes DDR SDRAM (with ECC) � Keyboard and Mouse interfaces � High performance Ultra 160 SCSI interface � 2 x asynchronous RS232 serial channels � High performance EIDE interfaces with optional on-board � Watchdog timer disk drive or optional CompactFlash™/Microdrive™ � Option for front panel connectors (see PP 220/01x interface datasheet) � 2 x 10/100/1000Mbps Ethernet interfaces � Optional Transition Module for rear panel I/O � Packet Switching Backplane (PICMG 2.16) � Support for Windows NT®, Windows® 2000, � High resolution graphics interface Windows® XP, Windows® XP Embedded, VxWorks®, � 2 x USB ports Linux® and QNX® � 512 Kbytes of BIOS Flash EPROM 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Blank Front Panel � 3 x LEDs:- � Hot Swap LED � Power On Self Test (POST) LED Serial Keyboard Mouse 69030 Interfaces Interface Interface � Processor Activity LED � recessed reset button Peripheral Bus DDR 3V SDRAM BIOS Flash Central Processors EPROM Low Power Real-Time Xeon � dual 2.0 GHz Low Voltage Intel® Xeon™ Clock Processor ServerWorks processors GC LE Chipset Low Power � each processor:- IPMI Xeon CF Processor TM � internal (L1) on-die cache CPU Bus � 512 Kbytes of secondary (L2) on-die cache Floppy Printer PCI EIDE Panel Disk USB 82546 SCSI � hyper threading technology Interface Link Interface Bridge Interface � NetBurst Microarchitecture � no CPU fan � utilizes 64-bit ServerWorks’ GC-LE chipset:- 2x IPMB EIDE DVI-D Universal 2 x Ethernet (PSB) SCSI � supports 400 MHz processor bus RS232 Serial Bus 10/100/1000Mbps Printer frequency to give peak bandwidth of 3.2 CompactPCI Gbytes/s DRAM � PICMG 2.1 R2.0 Hot Swap Specification Software Support � supporting up to 4 Gbytes of DDR ECC Compatible as hot swap controller only SDRAM:- � support for Windows NT, Windows 2000, � option to disable CompactPCI interface Windows XP, Windows XP Embedded, � up to 4 Gbytes provided via two 184-pin (Satellite Mode):- VxWorks, Linux and QNX DIMM sockets � use in any slot � DIMM modules fitted in pairs Firmware Support � receives power from CompactPCI bus � error correction up to 4-bits � Phoenix ServerBIOS™ � board can be hot swapped in this mode � peak bandwidth of 3.2 Gbytes/s � comprehensive Power-On Self-Test (POST) � J4 connector not fitted � accessible from Xeon processors or � LAN boot firmware included CompactPCI bus IPMI Flash EPROM � PICMG 2.9 R1.0 (System Management Hard Disk Interfaces � 512 Kbytes of BIOS Flash EPROM - 8-bits Specification) � EIDE interface:- wide � implements the IPMB0 interface � supports up to Ultra-DMA 100 for high � on-board BMC (Baseboard Management performance drives Serial Interface Controller) � 2 x channels (primary and secondary) � 2 x RS232 serial channels � auxiliary IPMB interface to J2 (IPMB1) � secondary channel can be used for � 16550 compatible UART � supports 32 Kbytes of non-volatile memory on-board 2.5 inch disk drive and/or � accessed via J5 to the Transition Module support for 1 CompactFlash or � each channel supports CTS, RTS, RI, DSR, Electrical Specification MicroDrive™ Type II drive. Note that the DTR and DCD � +5V@16A (typical with dual CPU and 2 Gbytes 2.5 inch disk drive occupies the PMC site DRAM); +5% / -3% Other Peripheral Interfaces � primary channel is accessible via J5 to � +3.3V@8A; +5% / -3% the Transition Module � keyboard and mouse interfaces via J5 to the � +12V@0.0A; -12V@0.0A Transition Module � Ultra 160 SCSI:- � implemented by a LSI53C1000R controller � PC-compatible Real Time Clock (Year-2000 Safety via 64-bit/66 MHz PCI bus compliant) � PCB (PWB) manufactured with flammability � accessible via J3 to the Transition � floppy disk interface via J5 to the rating of 94V-0 Module Transition Module Environmental Specification � 2 x USB (Universal Serial Bus) interfaces Ethernet Interfaces � 0°C to +55°C (operating) accessed via J5 to the Transition Module � 2 x channels supporting 10Base-T, � 10% to 90% Relative Humidity (operating non � parallel printer port interface (ECP, EPP and 100Base-TX, 1000Base-T condensing) IEEE1284) via J5 to the Transition Module � implemented by 82546 LAN Controller via � -40°C to +70°C (storage) � watchdog timer 64-bit/66 MHz PCI bus � 10% to 90% Relative Humidity (storage � system fan monitor; two CPU temperature � support for PICMG 2.16 - Packet Switching non-condensing) monitors; voltages monitor; board Backplane (PSB) temperature monitor:- Mechanical Specification � both channels available via J3 � all accessible via IPMI � 6U form-factor: 9.2inches x 6.3inches (233mm � optional support for rear panel RJ45’s via � speaker interface x 160mm) the Transition Module � dual slot: 1.6 inches (40.6mm); for populated CompactPCI Interface Graphics Interface panel see PP 220/01x � compliant with PICMG 2.0 R3.0; 3.3V and 5V � implemented by an Asiliant Technologies’ � connectors: IEC-1076-4-101 for J1-J5 signaling levels:- 69030 providing:- � shock: � universal signaling supported � 4 Mbytes video memory 20g, 11ms, ½ sine (operating); � 33/66 MHz; 32/64-bit interface accessed � resolutions up to 1600 x 1200 30g, 11ms, ½ sine (non-operating) via J1/J2 connectors � supporting up to 16M colors � vibration: � utilizing a PCI-PCI bridge for off-board � DVI-D flat panel interface supported via J3 5Hz-2000Hz at 2g, 0.38mm peak displacement accesses to the Transition Module (operating) � operates as a System Slot controller or in a 5Hz-2000Hz at 5g, 0.76mm peak displacement peripheral slot (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 220/112-xy Dual 2.0 GHz Low Voltage Xeon Processors where x = where y = 1 - Ethernet via rear panel 0 - reserved AD PP4/001-10 Transition Module with COM2 D9 connector plus CompactFlash connector 2 - Ethernet via PICMG 2.16 1 - 1 Gbyte AD PP4/001-11 Transition Module with COM2 D9 connector plus 1.8 inch Hard Disk Drive 2 - 2 Gbytes AD PP4/001-20 Transition Module with DVI-I connector plus CompactFlash connector 3 - 4 Gbytes AD PP4/001-21 Transition Module with DVI-I connector plus 1.8 inch Hard Disk drive AD CP1/DR1-z1 2.5 inch Disk Drive assembly For version with front panel connectors, see separate PP 220/01x datasheet For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1441/1104 Specification subject to change; E and OE. © Concurrent Technologies 2004 64-bit PCI Bus 64-bit PCI Bus