Intel® Pentium® M Processor Intelligent Dual PMC Carrier APPLICATIONS The PP 310/01x is a PC-compatible high performance, provided by the PICMG 2.9 compliant IPMI interface. high functionality, dual PMC CompactPCI® board sup- To simplify the board’s integration many popular in- porting the 1.6 GHz or 1.1 GHz Intel® Pentium® M pro- dustry standard operating systems are supported. The cessor. The PP310/01x will operate in a system slot, a PP 310/01x is suitable for a range of high-perfor- peripheral slot or independently from the CompactPCI mance applications within the industrial control, bus. High-performance networking is provided by two telecomms, telemetry, scientific and aerospace mar- Gigabit Ethernet links, and the board is compliant to the kets. The board is plug compatible with the PICMG® 2.16 specification. Full system monitoring is PP 110/01x family. HIGHLIGHTS � 1.6 GHz or 1.1 GHz Intel Pentium M processor: � CompactPCI controller: - 64 Kbytes L1 cache - operates in system slot or peripheral slot - 1 Mbyte L2 cache - 32/64-bit at 33/66 MHz CompactPCI interface - no CPU fan needed; low power processor � Option to bypass CompactPCI bus (Satellite Mode) � 1.8 GHz processor version available; � IPMI (Intelligent Platform Management Interface): see PP 312/01x datasheet - PICMG 2.9 (System Management Specification) � Single slot (for all option combinations) � Keyboard and Mouse interfaces � Up to 2 Gbytes of DDR DRAM (with ECC) � Up to 3 x RS232 serial channel interfaces: - 1 or 2 on-board � 2 x PMC module interfaces (32/64-bit at 33/66 MHz) - 2 on optional Transition Module � High performance EIDE interfaces with optional on-board disk drive or optional CompactFlash™/Microdrive™ � Watchdog timer and Long Duration Timer interface � Extended temperature version available: � 2 x 10/100/1000Mbps Ethernet interfaces - see PP 310/011-E datasheet � Dual Gigabit Packet Switching Backplane (PICMG 2.16) � Support for VxWorks®, Windows NT® , Windows® 2000, Windows® XP, Windows® XP Embedded, QNX®, Solaris™ � Graphics interface and Linux® � 32 Mbytes of Application Flash EPROM � Optional Transition Module for rear panel I/O: � 512 Kbytes of BIOS Flash EPROM - 2 x RS232 channels, Parallel Printer Port and Floppy Disk interfaces included � 512 Kbytes of battery backed SRAM 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Graphics PMC PMC 1 x Ethernet � 1.6 GHz or 1.1 GHz Intel® Pentium® M 1 x RS232 Interface Interface Interface 10/100/1000Mbps processor:- � 1.6 GHz uses �FC-PGA 478 2 x Serial Keyboard Mouse SM722 (micro Flip-Chip Pin Grid Array) package Interface Interface Interface � 1.1 GHz uses �FC-BGA 479 32-bit PCI Bus (micro Flip-Chip Ball Grid Array) package 3V BIOS Bridge Flash High Speed Link � 64 Kbytes of primary (L1) on-die cache EPROM Real-Time � 1 Mbyte of secondary (L2) on-die cache Clock � 400 MHz Front Side Bus (FSB) Pentium M ServerWorks Intel Processor GC-LE 82546EB Battery Application 64-bit � no CPU fan IPMI Backed Flash PCI Bus SRAM EPROM � 1.8 GHz processor version available; see PP 312/01x datasheet DDR S-DRAM � utilizes 64-bit ServerWorks’ GC-LE chipset Low Pin EIDE USB Count Interface Interface � provision for ITP debug port PCI Bridge CF or DRAM TM � supporting up to 2 Gbytes DDR ECC SDRAM:- 1 x RS232 IPMB 1xUSB PMC 2 x Ethernet (PSB) � up to 2 Gbytes provided via two SODIMM Optional Rear I/O 10/100/1000Mbps 2x Printer RS232 sockets EIDE Transition Module CompactPCI � error correction up to 4-bits � accessible from Intel Pentium M processor � 33/66 MHz; 32/64-bit interface accessed via or CompactPCI bus Battery Backed SRAM J1/J2 connectors � 512 Kbytes battery backed SRAM Hard Disk Interfaces � utilizing a PCI-PCI bridge for off-board accesses � EIDE interface:- Serial Interface � PICMG 2.1 R2.0 Hot Swap Specification � supports up to Ultra-DMA 100 for high compatible � up to 3 x RS232 serial channels:- performance drives � 1 channel via a 26-way high-density � operates as a System Slot controller or in a � two channels (primary and secondary) connector on front panel Peripheral slot � secondary channel can be used for � either 1 channel via J5 or 2 channels via � option to disable CompactPCI interface (Satellite on-board 2.5 inch hard disk drive (within optional Transition Module Mode):- a single slot); or, support for 1 or 2 � 16550 compatible UART � receives power from CompactPCI bus CompactFlash modules or IBM®/Hitachi � board can be hot swapped in this mode � channels support RI, CTS, RTS, DSR, DTR and Microdrive Type II drives DCD � primary channel is accessible via IPMI Transition Module Other Peripheral Interfaces � PICMG 2.9 R1.0 (System Management Specification) � keyboard and mouse interfaces accessed via Ethernet Interfaces a 26-way high-density connector on front � implements the IPMB0 interface � implemented by Intel 82546EB LAN panel � on-board Baseboard Management Controller Controller via 64-bit PCI bus � PC-compatible Real Time Clock (Year 2000 � supports 8 Kbytes of non-volatile memory � two channels supporting 10 Base-T, 100 compliant) Base-TX, 1000 Base-T:- Electrical Specification � watchdog timer � support for PICMG 2.16 R1.0 - Packet � +5V@3.7A (typical at 1.6 GHz with 512 Mbytes � system fan monitor; CPU temperature Switching Backplane (PSB) DRAM); +5% / -3% monitor; voltages monitor:- � optional support for rear panel RJ45’s via � +3.3V@6.5A; +5% / -3% � all accessible via IPMI Transition Module � +12V@0.01A; -12V@0.01A � speaker interface � one channel switchable to front panel RJ45, � +12V and -12V routed to PMC slots � 1 x USB (Universal Serial Bus) interface via supports 10 Base-T, 100Base-Tx and J5 Transition Module 1000Base-T Safety � 1 x 32-bit Long Duration Timer with � PCB (PWB) manufactured with flammability Graphics Interface processor interrupt capability rating of 94V-0 � implemented by a Silicon Motion SM722 � LPC (Low Pin Count) bus via J5 to enable providing:- Environmental Specification AD PP5/001 Transition Module to support:- � 8 Mbytes video memory � 0°C to +55°C (operating); for extended � floppy disk interface � resolutions up to 1280 x 1024; temperature version see PP 310/011-E � parallel printer port interface (ECP, EPP supporting up to 16M colors � 10% to 90% Relative Humidity, non-condensing and IEEE1284) � accessed via a 26-way high-density (operating) � 2 x RS232 serial channels connector on front panel � -40°C to +70°C (storage) Flash EPROMs � 10% to 90% Relative Humidity, non-condensing PMC Interface � 32 Mbytes of 8-bit Application Flash EPROM (storage) � 2 x PMC sites; for both sites:- � 512 Kbytes of 8-bit BIOS Flash EPROM � I/O via front panel Mechanical Specification Software Support � I/O via J3 and J5 � 6U form-factor: 9.2inches x 6.3inches (233mm x � 32/64-bit, 33/66 MHz PCI operation � support for VxWorks, Windows NT, Windows 160mm) 2000, Windows XP, Windows XP Embedded, � 3.3V or 5V signaling levels � single-slot: 0.8inches (20.3mm) QNX, Solaris and Linux � Transition Module provides rear I/O for both � connectors: IEC-1076-4-101 for J1-J5 PMC sites � shock: 20g, 11ms, ½ sine (operating); CompactPCI Interface 30g, 11ms, ½ sine (non-operating) � compliant with PICMG 2.0 R3.0; 3.3V or 5V Firmware Support � vibration: 5Hz-2000Hz at 2g, 0.38mm peak signaling levels:- � Phoenix® ServerBIOS™ displacement (operating); � universal signaling support � comprehensive Power-On Self-Test (POST) 5Hz-2000Hz at 5g, 0.76mm peak displacement � J4 connector not fitted � LAN boot firmware included (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 310/011-xy 1.1 GHz Pentium M Processor where x = where y = PP 310/012-xy 1.6 GHz Pentium M Processor 1 - Ethernet via rear panel 1 - 512 Mbytes 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD PP5/001-xx Transition Module 3 - Reserved 3 - 1.5 Gbytes AD 200/001-00 CompactFlash/Microdrive carrier assembly 4 - Ethernet via PICMG 2.16, RS232 via J5 4 - 2 Gbytes AD CP1/DR1-xx 2.5 inch Hard Disk Drive assembly AD HSC/001-02 Board Hot Swap cover (rear mounting) NOTE: compatible with AD PP5/001 Transition Module when x = 1 or 2 CB 26D/124-00 26-way HD to VGA, Keyboard, Mouse, RS232 connector cable All companies and product names are trademarks of their respective organizations. Datasheet Code 1419/0604 Specification subject to change; E and OE. © Concurrent Technologies 2004 PMC Module PMC Module 64-bit PCI Bus