Intel® Pentium® M Processor 745 Intelligent Dual PMC Carrier APPLICATIONS The PP 312/01x is a PC-compatible high performance, provided by the PICMG 2.9 compliant IPMI interface. high functionality, dual PMC CompactPCI® board sup- To simplify the board’s integration many popular in- porting the 1.8 GHz Intel® Pentium® M processor 745. dustry standard operating systems are supported. The The PP 312/01x will operate in a system slot, a periph- PP 312/01x is suitable for a range of high-perfor- eral slot or independently from the CompactPCI bus. mance applications within the industrial control, High-performance networking is provided by two Giga- telecomms, telemetry, scientific and aerospace mar- bit Ethernet links, and the board is compliant to the kets. The board is plug compatible with the PICMG® 2.16 specification. Full system monitoring is PP 310/01x family. HIGHLIGHTS � 1.8 GHz Intel Pentium M processor 745: � 512 Kbytes of battery backed SRAM - 64 Kbytes L1 cache � CompactPCI controller: - 2 Mbytes L2 cache - operates in system slot or peripheral slot - no CPU fan needed; low power processor - 32/64-bit at 33/66 MHz CompactPCI interface � 1.6 GHz and 1.1 GHz processor versions available; � Option to bypass CompactPCI bus (Satellite Mode) see PP 310/01x datasheet � IPMI (Intelligent Platform Management Interface): � Single slot (for all option combinations) - PICMG 2.9 (System Management Specification) � Up to 2 Gbytes of DDR DRAM (with ECC) � Keyboard and Mouse interfaces � 2 x PMC module interfaces (32/64-bit at 33/66 MHz) � Up to 3 x RS232 serial channel interfaces: - 1 or 2 on-board � High performance EIDE interfaces with optional on-board disk drive or optional CompactFlash™/Microdrive™ - 2 on optional Transition Module interface � Watchdog timer and Long Duration Timer � 2 x 10/100/1000Mbps Ethernet interfaces � Support for VxWorks®, Windows NT® , Windows® 2000, � Dual Gigabit Packet Switching Backplane (PICMG 2.16) Windows® XP, Windows® XP Embedded, QNX®, Solaris™ and Linux® � Graphics interface � Optional Transition Module for rear panel I/O: � 32 Mbytes of Application Flash EPROM - 2 x RS232 channels, Parallel Printer Port and Floppy � 512 Kbytes of BIOS Flash EPROM Disk interfaces included 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Graphics PMC PMC 1 x Ethernet 1 x RS232 Interface Interface Interface 10/100/1000Mbps � 1.8 GHz Intel® Pentium® M processor 745:- � uses �FC-PGA 478 (micro Flip-Chip Pin Grid Array) package 2 x Serial Keyboard Mouse SM722 Interface Interface Interface � 64 Kbytes of primary (L1) on-die cache 32-bit � 2 Mbytes of secondary (L2) on-die cache PCI Bus 3V BIOS � 400 MHz Front Side Bus (FSB) Bridge Flash High Speed Link EPROM � no CPU fan Real-Time Clock � 1.6 GHz and 1.1 GHz processor versions Pentium M ServerWorks Intel available; see PP 310/01x datasheet Processor GC-LE 82546EB Battery Application 745 64-bit Backed Flash IPMI PCI Bus � utilizes 64-bit ServerWorks’ GC-LE chipset SRAM EPROM � provision for ITP debug port DDR S-DRAM DRAM Low Pin EIDE USB Count Interface � supporting up to 2 Gbytes DDR ECC SDRAM:- Interface PCI � up to 2 Gbytes provided via two SODIMM Bridge CF or TM sockets � error correction up to 4-bits 1 x RS232 IPMB 1xUSB PMC 2 x Ethernet (PSB) � accessible from Intel Pentium M processor Optional 2x Rear I/O 10/100/1000Mbps Printer RS232 745 or CompactPCI bus EIDE Transition Module CompactPCI Hard Disk Interfaces � EIDE interface:- � PICMG 2.1 R2.0 Hot Swap Specification Serial Interface � supports up to Ultra-DMA 100 for high compatible � up to 3 x RS232 serial channels:- performance drives � operates as a System Slot controller or � 1 channel via a 26-way high-density � two channels (primary and secondary) in a Peripheral slot connector on front panel � secondary channel can be used for � option to disable CompactPCI interface � either 1 channel via J5 or 2 channels via on-board 2.5 inch hard disk drive (within (Satellite Mode):- optional Transition Module a single slot); or, support for 1 or 2 � receives power from CompactPCI bus � 16550 compatible UART CompactFlash modules or IBM®/Hitachi � board can be hot swapped Microdrive Type II drives � channels support RI, CTS, RTS, DSR, DTR and DCD � primary channel is accessible via IPMI Other Peripheral Interfaces Transition Module � PICMG 2.9 R1.0 (System Management � keyboard and mouse interfaces accessed via a Specification) Ethernet Interfaces 26-way high-density connector on front panel � implements the IPMB0 interface � implemented by Intel® 82546EB LAN � PC-compatible Real Time Clock (Year 2000 � on-board BMC (Baseboard Management Controller via 64-bit PCI bus compliant) Controller) � two channels supporting 10 Base-T, 100 � watchdog timer � supports 8 Kbytes of non-volatile Base-TX, 1000 Base-T:- � system fan monitor; CPU temperature monitor; memory � support for PICMG 2.16 R1.0 - Packet voltages monitor:- Switching Backplane (PSB) � all accessible via IPMI Electrical Specification � optional support for rear panel RJ45’s via � speaker interface � +5V@3.9A (typical at 1.8 GHz with 512 Transition Module Mbytes DRAM); +5% / -3% � 1 x USB (Universal Serial Bus) interface via J5 � one channel switchable to front panel RJ45, � +3.3V@6.5A; +5% / -3% Transition Module supports 10 Base-T, 100Base-Tx and � +12V@0.01A; -12V@0.01A � 1 x 32-bit Long Duration Timer with processor 1000Base-T interrupt capability � +12V and -12V routed to PMC slots � LPC (Low Pin Count) bus via J5 to enable the Graphics Interface Safety AD PP5/001 Transition Module support for:- � implemented by a Silicon Motion SM722 � PCB (PWB) manufactured with providing:- � floppy disk interface flammability rating of 94V-0 � parallel printer port interface (ECP, EPP and � 8 Mbytes video memory IEEE1284) Environmental Specification � resolutions up to 1280 x 1024; supporting up to 16M colors � 2 x RS232 serial channels � 0°C to +55°C (operating) � accessed via a 26-way high-density � 10% to 90% Relative Humidity, Flash EPROMs connector on front panel non-condensing (operating) � 32 Mbytes of Application Flash EPROM - 8-bits � -40°C to +70°C (storage) PMC Interface wide � 10% to 90% Relative Humidity, � 2 x PMC sites; for both sites:- � 512 Kbytes of BIOS Flash EPROM - 8-bits wide non-condensing (storage) � I/O via front panel Software Support � I/O via J3 and J5 Mechanical Specification � support for VxWorks, Windows NT, Windows � 32/64-bit, 33/66 MHz PCI operation � 6U form-factor: 9.2inches x 6.3inches 2000, Windows XP, Windows XP Embedded, QNX, (233mm x 160mm) � 3.3V or 5V signaling levels Solaris and Linux � single-slot: 0.8inches (20.3mm) � Transition Module provides rear I/O for both CompactPCI Interface PMC sites � connectors: IEC-1076-4-101 for J1-J5 � compliant with PICMG 2.0 R3.0; 3.3V or 5V � shock: Firmware Support signaling levels:- 20g, 11ms, ½ sine (operating); � Phoenix® ServerBIOS™ � universal signaling support 30g, 11ms, ½ sine (non-operating) � comprehensive Power-On Self-Test (POST) � 33/66 MHz; 32/64-bit interface accessed via � vibration: � LAN boot firmware included J1/J2 connectors 5Hz-2000Hz at 2g, 0.38mm peak � utilizing a PCI-PCI bridge for off-board accesses displacement (operating); Battery Backed SRAM � J4 connector not fitted 5Hz-2000Hz at 5g, 0.76mm peak � 512 Kbytes battery backed SRAM displacement (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 312/011-xy 1.8 GHz Pentium M Processor 745 where x = where y = 1 - Ethernet via rear panel 1 - 512 Mbytes AD PP5/001-xx Transition Module 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD 200/001-00 CompactFlash/Microdrive carrier assembly 3 - Reserved 3 - 1.5 Gbytes AD CP1/DR1-xx 2.5 inch Hard Disk Drive assembly 4 - Ethernet via PICMG 2.16, RS232 via J5 4 - 2 Gbytes AD HSC/001-02 Board Hot Swap cover (rear mounting) CB 26D/124-00 26-way HD to VGA, Keyboard, Mouse, NOTE: compatible with AD PP5/001 Transition Module when x = 1 or 2 RS232 connector cable All companies and product names are trademarks of their respective organizations. Datasheet Code 1461/0604 Specification subject to change; E and OE. © Concurrent Technologies 2004 PMC Module PMC Module 64-bit PCI Bus