<> <>
General
DO30G
Specifications Sensor for Dissolved Oxygen Analyzer
GS 12J05D03-01E
n GENERAL
The DO30G sensor for dissolved oxygen is designed
for use in water treatment plants such as sewage
treatment works, effluent activated sludge process,
and potable water treatment. It is also effective in river
monitoring, intake protection, fish farming and other
fields where water quality is important.
This galvanic cell has a fast response time and good
long term stability, and features replaceable diaphragm
and cable for easy maintenance. A temperature sensor
is incorporated for compensation. The DO30G sensor
DO30G Sensor
can be used in either the PB350G/PB360G floating ball
holders or in the DOX8HS submersion type holder.
n FEATURES
DO Sensor with Long-term Stability and Short
Electrolyte Stabilization Time
• A DO sensor that uses a special electrolyte, short-
ening the electrolyte stabilization time and realizing
stable measurements over a long period of time.
• Measuring range of 0 to 20 mg/l
• A membrane that is easily replaceable by anyone
because of the cartridge type
• A membrane 50 mm thick that is hard to tear and has
reduced influence from air bubbles
PB350G Floating ball holder
n SYSTEM
Refer to GS 12J5D2-E for dissolved oxygen converter DO402G, GS 12J05C01-01E for 2-wire transmitter DO202, GS
12A01A02-01E for 2-wire liquid analyzer FLXA21 and GS 12J05C02-00E for holders
DO Converter
DO Sensor Holder, Holder with Cleaner
• Guide pipe • Floating ball holder
• DO402G, DO202
• DO30G
PH8HG PB350G or FLXA21
PB360G
• Submersion
Select pin terminal
type holder
of DO30G sensor for
DOX8HS
DO402G, DO202.
Terminal Box
Without
Jet cleaner
cleaner
• WTB10-DO3, -DO4
Accessories
• Suspension holder
• DOX8A
HH350G
Note: “DO” of DO sensor means dissolved oxygen.
CAUTION
Installation Location of Holders (Guide Pipe, Submersion Type, etc)
The holder should be used in a place that is as vibration free as possible.
Using the holder in a place where it is affected by vibration, may result in damage to the holder.
Yokogawa Electric Corporation GS 12J05D03-01E
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan ©Copyright May. 2007 (YK)
Tel.: 81-422-52-5617 Fax.: 81-422-52-6792 3rd Edition: Oct. 2010 (YK)
<> <> 2
1. DO Sensor
n GENERAL SPECIFICATIONS‚ DO30G
SENSOR
Option
Model Suffix Code Description
Code
Dissolved Oxygen: 0 to 20 mg/l (ppm)
Dissolved Oxygen
Liquid Temperature: 0 to 40˚C
DO30G
Sensor
Liquid Pressure: 0 to 100 kPa
– -NN Always -NN
Flow speed: 20 cm/s or more
Membrane
Sensor for Temperature Compensation: Pt1000
50 µm
-50
thickness
Wetted Part Material: rigid polyvinyl chloride, stainless
-03 3m
steel, fluorinated ethylenepropylene, nitrile
-05 5m
rubber, heat-resistant soft polyvinyl chloride,
-10 10m
Cable length
and polycarbonate
-15 15m
Cable Length: 3 m, 5 m, 10 m, 15 m and 20 m -20 20m
Weight: Approx. 0.3 kg + 0.12 × N kg N: cable length
-PN Pin terminal *1
(ex. for cable length of 5 m, approx. 0.9 kg)
Cable terminal
-FK Fork terminal
-FL M4 ring terminal *2
*1 Select pin terminal for DO402G, DO202, and FLXA21.
n GENERAL SPECIFICATIONS‚ OTH-
When terminal box is used, select WTB10-DO3.
ERS *2 Used to connection to FLXA21.
When terminal box is used, select WTB10-DO4.
• WTB10 Terminal Box
Used when DO converter is installed at a distance from
2. Terminal Box
the DO sensor.
Ambient temperature: –10 to 50˚C Option
Model Suffix Code Description
Code
Construction: JIS waterproof
WTB10 Terminal box
Case material: Fiberglass reinforced polycarbonate
resin
Combinned
For DO402G, *1
-DO3
system
Electrical connections DO202, and FLXA21
DO sensor side: JIS A8 watertight plastic gland -DO4 For FLXA21 *2
DO converter side: JIS A15 watertight plastic gland
– -NN Always -NN
with cable (max. 40 m)
-00 No cable
Conduit adaptor (optional) available
-05 5m
Case color: Grayish green (Munsell 2.5GY5.0/1.0)
Specify cable
-10 10m
Weight: Body 0.5 kg Mounting hardware: 0.7 kg
length
-20 20m
• DOX8A Parts Set for Maintenance
-30 30m
-40 40m
A set of zero-adjusting reagent and maintenance parts
Mounting hardware /P Pipe mounting hardware
Option /W Wall mounting hardware
Zero adjusting reagent (sodium sulphite 500 g) 1 bottle
Conduit work adaptor /AWTB G 1/2
/ANSI 1/2NPT
Membrane assembly
*1 Used for pin terminals, and cable with pin terminals.
(for membrane thickness of 50 mm) .................3 sets
*2 Used for M4 screw terminals, and cable with M4 ring terminals.
Electrolyte for sensor (50 ml) ............................. 1 bottle
3. Accessories (parts set for maintenance)
Syringe for replacing electrolyte .................................. 1
Polish for silver electrode (30 g) ........................ 1 bottle
Option
Description
Model Suffix Code
Code
Polyethylene beaker (200 ml) ...................................... 1
Parts set for
• DOX8W Calibration Set (optional)
maintenance
This is necessary if the span calibration is to be done DOX8A
(for membrane
using a saturated dissolved oxygen solution. It is not
thickness of 50 µm)
necessary for air calibration.
For membrane
Sensor -M
replacing type sensor
–
B Style B
*
Air pump, stirrer, stirring element, bubbler, clamp,
beaker, and thermometer.
4. Caribration Set
Note: The calibration set can be used in com-
mon regardless of the type of holder.
Option
Model Suffix Code Description
Code
n CHARACTERISTICS DOX8W A Calibration set
*
Repeatability: 0.1 mg/l or 3% FS, whichever is
greater (including sensor)
5. Spare Parts
Temperature Compensation Error: Within ±3% FS
(including sensor) for a ±5˚C change in Part Name Part No. Remarks
the range of 0 to 40˚C
3 membrane assemblies
Membrane and
Response Time: Within 2 minutes (90% response) K9171HK (thickness of 50 µm)
electrolyte for sensor
50 ml of electrolyte
(including sensor)
Zero adjusting reagent
L9920BR Sodium sulfite 500g
Polisher K9088PE For polishing silver electrode 30g
n MODEL AND SUFFIX CODES
All Rights Reserved. Copyright © 2007, Yokogawa Electric Corporation GS 12J05D03-01E 3rd Edition: Oct. 28,2013-00
<> <> 3
n DIMENSIONS
DO Sensor DO30G
• Dissolved-oxygen sensor
• Dissolved-oxygen sensor with Unit: mm
with pin terminals
fork terminals
11 12 14 13 15 16
Pin terminals
11 12 14 13 15 16
Model and Suffix Codes L Weight (kg)
DO30G - NN - 50 - 03 - PN 3 000 Approx. 0.6
Approx. 80
DO30G - NN - 50 - 05 - PN 5 000 Approx. 0.8
DO30G - NN - 50 - 10 - PN 10 000 Approx. 1.4
DO30G - NN - 50 - 15 - PN 15 000 Approx. 2.0
DO30G - NN - 50 - 20 - PN 20 000 Approx. 2.6
Fork terminals
ø6.5 Model and Suffix Codes Weight (kg)
L
• Dissolved-oxygen sensor with
L
DO30G - NN - 50 - 03 - FK Approx. 0.6
3 000
ring terminals
DO30G - NN - 50 - 05 - FK Approx. 0.8
5 000
11 12 14 13 15 16
DO30G - NN - 50 - 10 - FK Approx. 1.4
10 000
DO30G - NN - 50 - 15 - FK Approx. 2.0
15 000
DO30G - NN - 50 - 20 - FK Approx. 2.6
20 000
Ring terminals
Model and Suffix Codes Weight (kg)
ø26 L
38.5 46
DO30G - NN - 50 - 03 - FL Approx. 0.6
3 000
DO30G - NN - 50 - 05 - FL Approx. 0.8
5 000
DO30G - NN - 50 - 10 - FL Approx. 1.4
10 10 000
Terminal asign
DO30G - NN - 50 - 15 - FL Approx. 2.0
15 000
DO30G - NN - 50 - 20 - FL Approx. 2.6
13 IE 20 000
108
15 RE
11 T1
12 T2
14 Shield
ø30
16 Liquid earth
ø36
Terminal Box WTB10
Detailed drawing of cable gland for terminal box
126 65
4-M5 screws, depth 9
(for mounting)
(a) Watertight plastic cable gland (St'd)
Converter cable (Extension cable) inlet (to be drilled for wiring)
Packing
with cable gland (applicable cable o.d.: Φ9 to 12 mm)
Retaining Claw
46
Sensor cable inlet (to be drilled for wiring)
with cable gland (applicable cable o.d.: Φ5.5 to 7 mm)
G1/2 (/AWTG)
Adapter for Conduit 1/2NPT (/ANSI)
±0.2 Please use the watertight cable gland of the attachment.
70
If metallic conduit is directly connected with the case,
it becomes the factor of the measurement error.
(b) Watertight plastic cable gland
with conduit adaptor F16.ai
All Rights Reserved. Copyright © 2007, Yokogawa Electric Corporation GS 12J05D03-01E 3rd Edition: Oct. 8,2010-00
22
178
±0.2
75 59
Approx. 26
Approx. 55
49
<> <> 4
Dedicated Extension Cable with WTB10 (Not supplied if suffix code “-00” is selected)
Unit: mm
WTB10-DO4 WTB10-DO3 WTB10-DO4
WTB10-DO3
1 4 1 4
14 (S) 14 (S)
1 5 1 5
15 (RE) 15 (RE)
1 3 1 3
13 (IE) 13 (IE)
1 6 1 6
16 (SE) 16 (SE)
1 1 1 1
11 (T1) 11 (T1)
1 2 1 2
40 80 80 40
12 (T2) 12 (T2)
45 45
80 L 80
L (mm)
Model and Suffix Code
WTB10 - DO3 - NN - 05, WTB10 - DO4 - NN - 05 Approx. 5000
WTB10 - DO3 - NN - 10, WTB10 - DO4 - NN - 10 Approx. 10000
Weight : Approx. 120 g / m
WTB10 - DO3 - NN - 20, WTB10 - DO4 - NN - 20 Approx. 20000
WTB10 - DO3 - NN - 30, WTB10 - DO4 - NN - 30 Approx. 30000
WTB10 - DO3 - NN - 40, WTB10 - DO4 - NN - 40 Approx. 40000
Pipe Mounting Bracket (Optional)
(Option Code: /P)
100
4 - φ5.5 holes
±0.2
70
4-M5 screws, depth 9
U-bolt, washer, nut
Nominal 50A
(outer diameter φ60.5)
70
pipe
(65)
4 - φ10 holes 48
Weight: approximately 700 g
Wall Mounting Bracket (Optional)
(Option Code: /W)
4-φ5.5 holes
100
±0.2
70
4-M5 screws, depth 9
70 (65)
13
Weight: approximately 300 g
3-φ10 holes
All Rights Reserved. Copyright © 2007, Yokogawa Electric Corporation GS 12J05D03-01E 3rd Edition: Oct. 8,2010-00
±0.2
±0.2
70 75 8
75 8
47
15 27
203
185
Approx. Φ9.5
(254)
(236)
Approx. Φ6.5
<> <> 5
n WIRING DIAGRAM EXAMPLE
DO402G
*1
*3
Output signal
L 1
61
(4 to 20mA DC or 0 to 20mA DC) mA 1 Power supply
2
N
62
G 3
*3
65
C
Output signal
31
mA 2
Contact
(4 to 20mA DC or 0 to 20mA DC)
NC
66 32
S1
output S1
NO
33
SCREEN
63
High and low
*1
C
41 alarms or HOLD
Contact input
21
Contact
NC
(cleaning start command) S2
42
output S2
22
NO
43
23
SCREEN
17
WTB10 Terminal box
Jumper
*4 *3
C
51
13 13 IE
Contact output S3 (cleaning,
NC
52
S3
HOLD or high and low alarms)
11 11 T1
NO
53
*5
C
12 12 T2
71
Contact output S4/FAIL
NC
14 14 Shield 72
S4 (failure or high and low alarms)
NO
73
15 15 RE
Grounding terminal (M4 screw)
16 16 Liquid earth *6 *2
Protective grounding (100Ω or less)
Note : External wiring connection terminal size is for Ø2 pin.
*1: Always use a shielded cable with an OD of 6 to 12 mm.
*2: Be sure to ground the DO converter case grounding terminal (grounding resistance of 100Ω or less).
DO30G
*3: Always use a cable with an OD of 6 to 12 mm.
DO sensor
*4: Terminal box is used only where DO converter is installed long distance from DO sensor. (ordinary not needed)
*5: This cable is specified in the Basic Code for the WTB10.
*6: Liquid earth to detect membrane failure. This function is available when using PB350G/PB360G float type holder.
Connect only when using this function.
All Rights Reserved. Copyright © 2007, Yokogawa Electric Corporation GS 12J05D03-01E 3rd Edition: Oct. 8,2010-00
<> <> 6
Inquiry Specifications Sheet for Dissolved Oxygen Analyzer
For inquiries on the Yokogawa dissolved oxygen analyzer, please tick (ü) the appropriate box (¨) and write down the
relevant information in the blanks.
1. General
Name of your company:
Name of person : Dept. or sect : (Phone No. )
Name of plant :
Measuring point :
Purpose of use :
¨ Indication ¨ Recording ¨ Alarm ¨ Control
Power supply : V¨AC Hz ¨ DC
2. Measurement Conditions
(1) Liquid temperature : to , Normal [°C]
(2) Liquid pressure : to , Normal [kPa]
(3) Flow speed : to , Normal [m/s]
(4) Name of liquid to be measured :
(5) Components of liquid to be measured :
(6) Other conditions :
3. Installation environment
(1) Ambient temperature: approx. [°C]
(2) Location :¨ Outdoors ¨ Indoors
(3) Other information :
4. Requirements
(1) Measurement range :¨ 0 to 20 mg/l ¨
(2) System component selection:
¨ Sensor ¨ Holder ¨ Converter ¨ Cleaning system ¨ Calibration set
¨ Parts set for maintenance ¨ Terminal Box
(3) Length of sensor cable :¨ 3 m ¨ 5 m ¨ 10 m ¨ 15 m ¨ 20 m
(4) Type of holder :¨ Guide pipe ¨ Submersion ¨ Floating ball ¨ Suspension
(5) Cleaning method :¨ No cleaning ¨ Jet cleaning
(6) Other requirements :
All Rights Reserved. Copyright © 2007, Yokogawa Electric Corporation GS 12J05D03-01E 3rd Edition: Oct. 8,2010-00
Subject to change without notice.
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods