Manufacturers
YAGEO 4311-115-00245
Description
ANTENNA 802.11B LNG BLUTOOTH SMD
Part Number
4311-115-00245
Price
Request Quote
Manufacturer
YAGEO
Lead Time
Request Quote
Category
PRODUCTS - 4
Datasheet
Extracted Text
MULTILAYER CERAMIC ANTENNA FOR BLUETOOTH & WLAN IEEE 802.11b (2.45G Hz ISM Band) (Long Shape) 1 Product Specification (Preliminary) QUICK REFERENCE DATA Dimension 8* 3.5 * 0.9 mm Central Frequency* 2.45 GHz Bandwidth >100 MHz Gain 0dBi max VSWR 2.0 max Polarization Linear Azimuth Omni-directional Impedance 50Ω o Operating Temperature -55~125 C Termination Ni/Sn (Environmentally-Friendly Leadless) o Resistance to soldering heat 260 C, 10 sec. Maximum Power 1W * Three types of antenna are available for central frequency adjustment (type 245, type 260, type 270) Special Environmental Concerns- Green Products Design: The foil making process is using environmentally-friendly aqueous solvent technology. Termination is lead free (Pb free) and packing materials can be re-cycled 1 All the technical data and information contained herein are subject to change without priot notice Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-1 A4 Page 1 spec.doc Phycomp Taiwan Ltd. APPLICATION 8mm 2mm Suggested Layout Ground plane(back side) Cleanance 6mm Antenna Bluetooth module or other 6mm RF Module Cleanance 50Ohm Transmission Line (by Microstrip Line or Coplanar Waveguide) DIMENSIONAL DATA Figure Dimension Port 8±0.25 mm - L s1 s1 3.5±0.2 mm - W s1 s1 0.9±0.2 mm - T 1.25±0.25 mm Feed Termination F C C 0.5±0.3 mm - C L L 1.25±0.25 mm NC Solder Termination S1 C C W W F F T T F F Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-2 A4 Page 2 spec.doc Phycomp Taiwan Ltd. SOLDER LAND PATTERN Figure Remark Dimensions L 9 ± 0.10 mm L F Feed Pad 1.40 ± 0.10 mm C 0.90 ± 0.10 mm F F S1 S1 NC Mount Pad 1.40 ± 0.10 mm C C C C C C C C Radiation Pattern Polar plot E Plane H Plane Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-3 A4 Page 3 spec.doc Phycomp Taiwan Ltd. STANDARD TEST BOARD FOR SWR (Note: Only for SWR Measurement, not for suggested layout) 23 mm 5 mm 2.6mm SMA 1.2 mm 15 mm Material:FR4 PCB 0.8 mm 50 ohm transmission line Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-4 A4 Page 4 spec.doc Phycomp Taiwan Ltd. RELIABILITY DATA (Reference to IEC Specification) IEC IEC 384-10/ 60068-2 TEST PROCEDURE REQUIREMENTS CECC 32 TEST 100 METHOD CLAUSE 4.4 Mounting The antenna can be No visible damage mounted on printed- circuit boards or ceramic substrates by applying wave soldering, reflow soldering (including vapour phase soldering) or conductive adhesive 4.5 Visual inspection Any applicable method In accordance with and dimension using × × × × 10 specification (chip check magnification off 4mm) 4.6.1 Antenna Frequency = 2.45 GHz; Standard test board o in page 4 at 20 C 4.8 Adhesion A force of 3 N applied No visible damage for 10 s to the line joining the terminations and in a plane parallel to the substrate 4.9 Bond strength of Mounted in accordance No visible damage plating on end face with CECC 32 100, paragraph 4.4 Conditions: bending 0.5 No visible damage mm at a rate of 1mm/s, radius jig. 340 mm, 2mm warp on FR4 board of 90 mm length 4.10 20(Tb) Resistance to The terminations 260 ± 5 °C for 10 ± 0.5 s soldering heat in a static solder bath shall be well tinned after recovery and Central Freq. Change ± 6% Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-5 A4 Page 5 spec.doc Phycomp Taiwan Ltd. IEC IEC 384-10/ 60068-2 TEST PROCEDURE REQUIREMENTS CECC 32 TEST 100 METHOD CLAUSE Resistance to Using visual 260 ± 5 °C for 30 ± 1 s leaching in a static solder bath enlargement of × × × × 10, dissolution of the termination shall not exceed 10% 4.11 20(Ta) Solderability Zero hour test, and test The termination must after storage (20 to 24 be well tinned, at months) in original least 75% is well atmosphere; un-mounted tinned at termination chips completely immersed for 2 ± 0.5 s in 235 ± 5°C. 4.12 4(Na) Rapid change of -55 °C (30 minutes) to No visible damage temperature Central Freq. Change +125 °C (30 minutes); ± 6% 100 cycles 4.14 3(Ca) Damp heat No visible damage 500 ± 12 hours at 60 °C; 90 to 95 % RH 2 hours recovery Central Freq. Change ± 6% 4.15 Endurance No visible damage 500 ± 12 hours at 125 2 hours recovery °C; Central Freq. Change ± 6% Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-6 A4 Page 6 spec.doc Phycomp Taiwan Ltd. ORDERING INFORMATION: Method I- by 12NC Ordering Code The antennas may be ordered by using the 12 NC ordering code. These code numbers can be determined by the following rules: 4311 1 15 00 245 F C M S T A F. Family Code 43 = Antenna C. Packing Type Code 11 = 180 mm/ 7" blister (1000pcs) , 12 = 330 mm/13" blister (4000 pcs) 13 = Bulk (1000 pcs) M. Materials Code 1 = High Frequency Material S. Size Code 15 = 8 * 3.5 * 0.9 mm T. Tolerance 00 = 100 M Hz Band Width A. Working Frequency (three types of antenna are available) 245 = 2.45 GHz Type 245 260 = (2.45+0.15) GHz * Intention for shift up 150MHz Type 260 270 = (2.45+0.25) GHz * Intention for shift up 250MHz Type 270 Example: 12NC 4311 111 00245 Product description: Antenna (43) by 180 mm blister (11) of High Frequency Material (1), Size 7.35*5.5*1.3 mm (1); Tolerance (00) of 100 MHz (VSWR<2) Working Frequency (245) = 2.45G Hz ORDERING INFORMATION: Method II- by Clear Text Code The antennas may be ordered by using the 16-digit clear text ordering code. These code numbers can be determined by the following rules: AN2450000708031K (Clear Text Code Example) AN 2450 00 07 0803 1 K Product Central Freq. Bandwidth Material Size Quantities Packing AN= 2450=2.45GHz 00= >100MHz 07=K7 0803=8*3.5* 1 = 1K K=7" plastic Antenna 2600=2.60GHz 0.9 mm 4 = 4K F =13" plastic 2700=2.70GHz B = Bulk Print date 01/12/13 HF R&D Preliminary internal use only Aug. 6, 01 Long Shape Multilayer Ceramic Antenna 4311 115 00245/260/270 for Bluetooth (ISM Band 2.45GHz) Grant Lin/Cliff 2001-08-06 sheet 190-7 A4 Page 7 spec.doc Phycomp Taiwan Ltd.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 4311-115-00245 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods