Manufacturers
XP POWER HUP80 Series
Description
XP Power HUP80 Series Power Supplies
Part Number
HUP80 Series
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
PRODUCTS - H
Datasheet
Extracted Text
AC/DC External Desktop 80 Watts THE XPERTS I N POWER HUP80 Series Meets EN61000-3-2 • • Built-in EMI Filter • 100% Burn-in • Input Surge Current Protection • CE Mark • Approved to UL, CSA and TUV Safety Standards • Wide Input Voltage 90-264 VAC Specification Temperature • All outputs ±0.04%/°C Input Coefficient maximum Input Voltage • 90-264 VAC Input Frequency • 47 to 63 Hz General Input Current • 1.9A maximum Efficiency • 83% typical Inrush Current • 15A max. at 115 VAC or Isolation Voltage • 3000 VAC from input to output 30A max. at 230 VAC cold start 1500 VAC from input to ground Safety Ground • 0.75 mA max at 240 VAC 500 VAC output to ground Leakage Current LED Indications • Green LED for AC OK & DC OK Input Protection • Internal 2 A fuse MTBF • 100,000 hours minimum at full load at 25 °C ambient Output Dimensions • 3.09” x 6.61” x 1.75” Output Voltage: • See Tables Weight • 750 g approx Output Current • See Tables Output Power Range • 0 to 80 Watts Environmental Output Adjustment • ±5%, not user adjustable Operating • 0 °C to +70 °C, derate linearly from Start Up Delay • 2 S max Temperature Range 100% load at +40 °C to 50% Start Up Rise Time • 2 mS load at +70 °C Hold-up time • 12 msec minimum Cooling • Convection cooled Initial Set Accuracy • ±3% Operating Humidity • 5-95% RH, non condensing Drift • ±1% mV Storage Temperature • -40 °C to +85 °C Line Regulation • ±1% maximum at full load Storage Humidity • 5-95% RH, non condensing Load Regulation • ±5% EMC & Safety Overshoot/Undershoot• 150% at turn on/off Emissions • EN61000-3-2, -3 Transient Response • Maximum excursion of 4% or better EN55022/CISPR22 Class B & FCC on all models. Recovers to 1% of Part 15 Level B conducted & radiated final value within 500 µs after a 25% step load change ESD Susceptibility • EN61000-4-2, Level 3, Perf Criteria A Ripple and Noise • 1% peak to peak max. Radiated • EN61000-4-3, Level 2, Perf Criteria A Susceptibility Overvoltage • Provided on output #1 only set at Protection 112-132% of its nominal voltage EFT/Burst • EN61000-4-4, Level 2, Perf Criteria A Overload Protection • All outputs protected to short Surge • EN61000-4-5, Level 3, Perf Criteria A circuit conditions Conducted • EN61000-4-6 Level 2 Perf Criteria A Short Circuit • Hiccup mode Susceptibility Protection Safety Approvals • EN60950, UL60950, CSA950 • • PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com OUTPUT VOLTAGE & CURRENT RATINGS HUP80 Max Output #1 Output #2 Output #3 Output Model (1) (1) (1) Power Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number 50 W 3.3 V 0.0 A 15.1 A 7% HUP80-00 65 W 5.0 V 0.0 A 13.0 A 5% HUP80-10 70 W 7.0 V 0.0 A 9.9 A 5% HUP80-10-1 75 W 10.0 V 0.0 A 7.5 A 5% HUP80-11 80 W 12.0 V 0.0 A 6.6 A 5% HUP80-12 80 W 15.0 V 0.0 A 5.3 A 5% HUP80-13 80 W 18.0 V 0.0 A 4.4 A 5% HUP80-13-1 80 W 24.0 V 0.0 A 3.3 A 5% HUP80-14 80 W 30.0 V 0.0 A 2.7 A 5% HUP80-16 80 W 36.0 V 0.0 A 2.2 A 3% HUP80-17 80 W 48.0 V 0.0 A 1.7 A 3% HUP80-18 60 W +5.0 V 0.5 A 7.0 A 5% +12 V 0.3 A 3.0 A 5% HUP80-23 60 W +5.0 V 0.5 A 7.0 A 5% +15 V 0.3 A 3.0 A 5% HUP80-24 60 W +5.0 V 0.5 A 7.0 A 5% +24 V 0.2 A 2.0 A 5% HUP80-25 60 W +5.0 V 0.5 A 7.0 A 5% -24 V 0.2 A 2.0 A 5% HUP80-25-1 38 W +3.3 V 0.5 A 7.0 A 5% +5 V 0.3 A 3.0 A 5% HUP80-26 56 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.2 A 2.7 A 5% HUP80-27 65 W +5.0 V 0.5 A 6.0 A 5% +12 V 0.2 A 2.7 A 5% -5 V 0.1 A 0.3 A 5% HUP80-30 59 W +5.0 V 0.5 A 6.0 A 5% +12 V 0.2 A 2.1 A 5% -12 V 0.1 A 0.3 A 5% HUP80-31 65 W +5.0 V 0.5 A 6.0 A 5% +15 V 0.2 A 2.1 A 5% -15 V 0.1 A 0.2 A 5% HUP80-32 63 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.3 A 3.0 A 5% -5 V 0.1 A 0.8 A 5% HUP80-36-1 65 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.3 A 3.0 A 5% -12 V 0.1 A 0.8 A 5% HUP80-36-3 65 W +5.0 V 0.5 A 6.0 A 5% +24 V 0.1 A 1.2 A 5% -12 V 0.1 A 0.4 A 5% HUP80-39 65 W +5.0 V 0.5 A 7.0 A 5% +24 V 0.2 A 2.0 A 5% -24 V 0.1 A 0.5 A 5% HUP80-39-1 Notes 1. Total regulation includes tolerance, line regulation and load regulation. 2. For optional On/Off switch, add suffix ‘S’ to model number. • Mechanical Details PIN CONNECTIONS 5-Pin is Standard Pin Single Dual Triple 1 Common Common Common 2 Common Common Common 3 Output Output #1 Output #1 4 Common Common Output #3 5 Output Output #2 Output #2 For HUP80-00 and HUP80-10 only: Output connector is an 8-pin DIN connector. Pin 3, 5, 7 and 8 are +Vout. Pins 1, 2, 4 and 6 are Common. NOTES: 1. Dimensions shown in inches (mm). 2. Tolerance 0.04” (1.0mm) maximum. 8-Pin DIN for HUP80-00, 3. Cable length is 48.0” approx. -10 Only 4. Optional output connectors available consult factory. 5. Weight: 750 g approx. 6. Multiple output models include a ferrite bead on the output cable. PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the HUP80 Series have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods