Low-Profile DSX-1 Panels Copper :: 56, 64 or 84 Terminations, Wire-Wrap or Connectorized I/O Overview Primary Benefits Telect low-profile DSX-1 panels deliver the cross-connect • 4-inch height provides 43% increase in DS1 circuit density capabilities you need in a compact footprint to save space. All over 7-inch-high products configurations are just 4 inches in height to maximize space and • Industry-standard design enables the use of all legacy provide industry-leading density. Bantam patch cords, including Telect Blue Nickel brand • EIA and WECO rack mounting Advanced cable management, patented jacks for durability, and • 19- to 23-inch mounting adapter brackets included with all competitive pricing all add up to uncompromised performance in a 19-inch panels so only one part number is required within cost-effective package. Panels are available in wire-wrap or 64-pin your ordering system connectorized I/O configurations. • Circuit multiples match industry-standard SONET OC3, 12, 48 and 192 systems • Gain a lifetime of reliable connections with Telect’s patented Dedicated Digital Jacks Applications • Backed by T elect’s DSX lifetime warranty • High-density central office connectivity — bay lineups • Low circuit count remote applications — individual panels • Wireless or traditional wireline networks 010-0184-1010 Front View 010-0156-0010 Front View © Telect, Inc., All Rights Reserved, 11.10.11/rev.5 1 1.509.926.6000 :: telect.com Low-Profile DSX-1 Panels Copper :: 56, 64 or 84 Terminations, Wire-Wrap or Connectorized I/O Overview DSX Jack Specifications Description Part Number Test Method 56-Termination Panels Dedicated Digital Jack Unless otherwise specified, all appropriate products are tested Front cross-connect, wire-wrap, 19” 010-0156-0000 underMlL-J-641, method 202F Front cross-connect, connectorized, 19” 010-0156-0010 Electrical Rear cross-connect, wire-wrap, 19” 010-2156-0103 Insertion loss < -0.5 dB (at 1.576 MHz) 64-Termination Panels Crosstalk < -60 dB Front cross-connect, wire-wrap, 23” 010-0164-1000 Return loss < -26 dB at 772 kHz Front cross-connect, connectorized, 23” 010-0164-1010 Monitor level 21 dB +/-1.5 dB below signal level Rear cross-connect, wire-wrap, 19” 010-2164-0000 Contact resistance < 0.01 ohms Rear cross-connect, connectorized, 19” 010-2164-0010 Characteristic impedance 100 ohms 84-Termination Panels Mechanical Front cross-connect, wire-wrap, 23” 010-0184-1000 Insertion force 4.17 lb (1.9 kg) average Front cross-connect, connectorized, 23” 010-0184-1010 Withdrawal force 5.21 lb (2.4 kg) average Rear cross-connect, wire-wrap, 19” 010-2184-0001 Life Minimum 20,000 insertion/withdrawal Rear cross-connect, connectorized, 19” 010-2184-0010 cycles 84-term. panels feature 1-84 designation and include 1-28 ABC kit. Vibration Per MlL–STD-202F, method 201A Environmental Panel Dimensions Salt spray Per MlL-STD-202F, method 101D 19” panels 9” W x 4” H x 12” D Moisture resistance Per MlL-STD-202F, method 106E (483 mm x 102 mm x 254 mm) Thermal limits -40 to 149°F (-40 to 65° C) operating 23” panels 23” W x 4” H x 12” D -67 to 185°F (-55 to 85° C) non- (584 mm x 102 mm x 254 mm) operating 19” panels can also be mounted in 23” racks. Thermal shock Per MIL-STD-202, method 107D Humidity 0 to 95% operating and non-operating Panel Weight 56-termination panels 23 lbs. (10.4 kg) Accessories 64-termination panels 24 lbs. (11.3 kg) 84-termination panels 25 lbs. (10.9 kg) Description Part Number Single conductor Blue NickelTM patch 040-1000-xxx (xxx=feet) cord Dual conductor Blue NickelTM patch 040-2000-xxx (xxx=feet) cord Looping plug 040-3000-0000RC 100-Ohm Bantam terminating plug 040-5000-0100 5-Conductor cross-connect wire, 1000 ft. 060115RC Bantam circuit guard plug, white 101222-2 Bantam circuit guard plug, red 101222-3 “Phoney” plug, black 101235-1 “Phoney” plug, red 101235-3 Rear View, Connectorized Panel © Telect, Inc., All Rights Reserved, 11.10.11/rev.5 2 1.509.926.6000 :: telect.com