Total Front Access DSX-3 System Copper :: Up to 4 Terminations, Modular Design; Ideal for Limited-Space/Wall-Mount Apps Overview Primary Benefits • Industry-leading termination density: 1152, 1536 or A simple solution for limited-space or lower circuit count 2304 (LC) patch terminations installations, Telect’s total front access (TFA ) DSX-3 system • High-density 1x32 splitters enable up to 1296 outputs per houses three or four terminations in just one standard rack unit frame; combine with patch modules for a complete FTTx/ (1.75 in.) of vertical space. Available in a 19-inch/3-termination or PON distribution solution 23- inch/4-termination footprint, the TFA DSX-3 features all I/O and • All cable paths manage 30 mm bend radius for optimum cross-connect access on the front of the panel. fiber protection • Multiple cable routing paths enable diverse routing with A modular design allows users to purchase hardware to meet reduced cable congestion capacity requirements and defer capex spending until needed. • Total front access permits single craftsperson operation with Six-port DSX-3 modules greatly simplify maintenance by no patch cord “fishing” or blind cable pulls providing bi-directional monitoring of the signal from one location, • 4.5-meter patch cord cross-connects any two points within eliminating the need for users to travel to the physical location of a frame the other end of the cross-connect for troubleshooting. Applications See additional copper connectivity solutions, patch cords, accessories, • Co-locates • Customer premise additional product documentation and much • Remote sites more online at Telect.com. • CEVs Other limited-space/low-capacity environments Total front access DSX-3 system: 010-0000-1750 chassis with four 010-9201-0411 modules. © Telect, Inc., All Rights Reserved, 11.11.11/rev.3 1 1.509.926.6000 :: telect.com Total Front Access DSX-3 System Copper :: Up to 4 Terminations, Modular Design; Ideal for Limited-Space/Wall-Mount Apps Ordering Information Description PartNumber 3-position chassis 010-0000-0750 4-position chassis 010-0000-1750 TFA wall-mount bracket 126363-1 6-port mini-WECO module 010-9201-0411 Telect provides a full line of DSX-3 accessories. DSX-3 Jack Specifications 6-port DSX-3 module, part number 010-9201-0411 Electrical Insertion loss < 0.30 dB at DS3 signal rates for assemblies that do not include a moni- tor network < 1.00 dB at DS3 signal rates for assemblies that include a single monitor network Crosstalk ≤ -60 dB Return loss < -26 dB at DS3, STS-1 and E3 signal rates Monitor level 21 dB +/-1.5 dB below signal level Contact resistance < 0.01 ohms Characteristic impedance 75 ohms Mechanical Insertion force 10 lbs. (4.6 kg) maximum Withdrawal force 7 lbs. (3.2 kg) maximum Life Minimum 10,000 insertion/ withdrawal cycles Environmental Thermal limits -67 to 185°F (-55 to 85° C) operat- ing and non-operating Thermal shock Per MIL-STD-202, method 107D Humidity 0 to 95% operating and non- operating Wall-mount bracket, part number 126363-1 © Telect, Inc., All Rights Reserved, 11.11.11/rev.3 2 1.509.926.6000 :: telect.com