PCI-948 ® Pentium III processor - Low Power, space sensitive, dual ethernet support The PCI-948 is a board-level solution for mission-critical applications in the CTI and data communications markets, featuring an advanced Pentium III processor - Low Power, dual Ethernet support and up to 1 GB of memory. Features include: • Intel Pentium III Processor - Low Power at 500 MHz and 256 KB of 64-bit L2 cache • Up to 1 GB of SDRAM on 4 DIMM Ultra high performance, passive sockets cooled SBC for high growth data • Dual 10/100Base-TX Ethernet communications market support • Two Ultra DMA/33 IDE channels Designed to provide maximum The PCI-948 is also ideal as a board-level • Optional CompactFlash™ Disk performance and passive cooling, the solution for 1U system solutions. Its low PCI-948 suits a wide range of mission- power module delivers improved thermal • USB, Serial and Parallel ports critical applications in the CTI, ISP/ASP management and streamlines design work • AGP video with 2 MB SDRAM and data communications markets where with the processor-to-chipset layout 64-bit attention to high throughput demand and already complete. The PCI-948 is also • ATX support (Power-saving space sensitive environments continually capable of supporting a variety of software features such as Wake-on-LAN and more) ® need to be satisfied. interfaces including Windows NT 4.0, ® Windows 2000, QNX and Linux. ® Powered by a Pentium III processor - Low Power at speeds of up to 500 MHz, the PCI-948 delivers up to 1 GB of SDRAM and support for dual Ethernet. It offers a full feature-set of two Ultra DMA/33 IDE channels, a range of power-saving functions, and USB, serial and parallel ports. PCI-948 - Technical Specifications CPU Headers: USB (10-pin shrouded); serial ports (two 10-pin shrouded); • Intel Pentium II/III processor - Low Power; 333, 400, 500 MHz parallel port (26-pin shrouded); floppy (34-pin shrouded); EIDE (two • Intel 440BX AGPset 40-pin shrouded); PC104 and PC104+; PS/2mouse (4-pin locking); CompactFlash™ Module header; keyboard, speaker, and EIDE disk LED Bus Interface (16-pin shrouded); power-down connector (2-pin locking); ATX connector • Front Side Bus (66/100 MHz) • AGP Bus 66 MHz BIOS • PCI Bus (33 MHz) • Award Elite BIOS in Boot Block Flash with recovery code; save CMOS • ISA Bus (8.33 MHz) in Flash option, and boot from LAN capability • Auto configuration, extended setup Cache • CC00-E000 address blocking; PnP tables • 16/16 KB Instruction / Data Level 1 • Setup console redirection to serial port (VT100 mode) with CMOS setup • 256 KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC access • Software enable/disable of onboard Ethernet; hardware enable/disable Memory of onboard video • Four 168-pin latching DIMM sockets, 64/72-bit • Diskless, keyboardless, and videoless operation extensions • Up to 1 GB of SDRAM with 2, 4, 8, 16 or 32 M x 64/72, 100 MHz • System, video, LAN, and SCSI BIOS shadowing Synchronous DRAM / Registered SDRAM non-ECC/ECC mode (single • Programmable memory wait states bit error correction, double bit detection via Intel 440BX AGPset); all • Advanced security feature for floppy and HDD; DMI & HDD S.M.A.R.T. 1 GB cacheable support • Advanced Configuration and Power Interface (ACPI 1.0), Advanced Data Path Power Management (APM 1.2), advanced thermal management (resume, • 64-bit CPU bus; 32-bit AGP bus; 32-bit on PCI bus; 16-bit on ISA bus overheat alarm and auto slow down), and Green support Interrupts Supervisory • 11 edge sensitive and configurable • Two-stage software programmable watchdog timer drives NMI on • 4 PCI level sensitive, configurable to any interrupt vector for PnP 1st stage, system reset on 2nd stage compatibility • Time out from 16 msec to 4.25 min • All ISA onboard interrupts are PnP compliant • CPU temperature monitor/alarm; board temperature sensor; power failure/low battery detector, and two end-user defined open-drain general DMA Channels (ISA) purpose I/Os; SMBus, I2C Bus • Four 8-bit, three 16-bit • Supports scatter / gather, Fast Type-F DMA OS Compatibility ® ® ® • PC-DOS and MS-DOS™; Windows 3.X; Windows 95; Windows 98; ® ® ® Flash Memory Windows CE; Windows NT 4.0; Windows 2000; QNX™ and Linux • 256 KB Boot Block for BIOS field upgrade • 4 KB Serial EEPROM for user configuration; silicon serial ID TAG for Mechanical unique board identification accessible via software • 338 x 122 x 36 mm at CPU / fan (13.32 x 4.80 x 1.40 in. at CPU / fan) • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PICMG Rev. 2.0 I/O standards I/O: SMC FDC37C672 Super I/O USB Ports: Two Power Requirements Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-2 with Supply Voltage Vcc : +5V ± 5% / +12V ± 5% BIOS selectable IRQs and addressing, serial port 2 BIOS configurable Pentium II/III: 333 400 500 RS-422/485 ICC typ.* +5V TBA 2.84A 3.56A Parallel Port: One bi-directional with all IEEE 1284 protocols supported ICC susp. +5V TBA 1.56A 1.54A and BIOS selectable IRQs and addressing Floppy Disk: Support for two drives (360 KB to 1.44 MB) Environmental EIDE: Four EIDE drives; PIO Mode 4, Bus Master IDE or Ultra DMA/33 Operating Storage and Transit CompactFlash™ Module: Optional bootable CompactFlash™ Temperature: 0° to 55°C/32° to 131°F -40° to +70°C/-40° to +158°F module interfaces to secondary IDE channel, user upgradeable, (w/airflow) master/slave Humidity: 5% to 95% @ 40°C/104°F 0% to 95% @ +40°C/+104°F Ethernet: Two PCI 10Base-T/100Base-TX (Intel 82559) non-condensing non-condensing Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft Video Shock: 5 G, each axis • Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT controller Vibration: 1.5 G, each axis with 2 MB 83 MHz SDRAM memory (C&T 69000) • Supports CRT with resolution up to 800 x 600, 16.8 M colors; Reliability 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced • MTBF: TBD • Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA, and • SCSI termination, USB and mouse / keyboard voltage protected by SXGA self-resetting fuses • Unique silicon serial number accessible via software Clock / Calendar • 2 year limited warranty • Real-time clock with 256 byte battery backup CMOS RAM Designed to meet or exceed: Connectors Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 Faceplate: CRT (female DB-15 slim); 2 Ethernet (RJ-45 with link/activity EMI/EMC: FCC 47 CFR Part 15/CISPR22; CE Mark to EN55022/EN50082 indicators); PS/2 mouse and keyboard (one 6-pin mini-DIN that combines both functions) Teknor Applicom helps customers speed to market with USA CANADA EUROPE applied computing solutions featuring single board Tel.: (450) 437-5682 Tel.: (450) 437-5682 Tel.: +49 8165 77-0 computers, integrated systems and software specifically Fax: (450) 437-8053 Fax: (450) 437-8053 Fax: +49 8165 77-219 designed for Telecommunications, Internet, Industrial Automation, Mobile Computing and all types of high speed, www.teknor.com • 1.800.387.4222 high availability applications. The latest version of this document may be found on our web site. Specifications subject to change without notice. Teknor Applicom Inc. is a Kontron Group Company. Teknor Applicom Inc. and the Teknor ellipse logo are registered trademarks of Teknor Applicom Inc. All other trademarks are the property of their respective owners. Copyright 2000 by Teknor Applicom Inc. All rights reserved. PCI-948.2_12/2000 Printed in Canada Rep.0_12/2000