PCI-943 Powerful and space efficient Teknor's slot sensitive PCI-943 SBC, ® with a flush Pentium II or III processor and rugged FlexMount™ retention, enables use of all slots on standard PICMG-compliant PCI/ISA passive backplanes. Features include: ® ® • Pentium II or Pentium III SECC processor 350 to 500 MHz with 512 KB L2 Cache • Intel 440BX AGPset with 100 MHz FSB • Up to 512 MB SDRAM/RSDRAM • USB, Serial and Parallel Ports • Ultra DMA/33 IDE (Dual) & Ultra Fast/Wide SCSI 3 Rugged, dependable • 10/100Base-TX Ethernet and slot efficient SBC • 64-bit AGP Video with 2 MB SDRAM The PCI-943 SBC is a powerful, slot- It also supports high performance PCI saving SBC with excellent shock, vibration Ultra DMA/33 IDE, Ultra Fast/Wide SCSI and thermal characteristics. It features a 3, and 10Base-T/100Base-TX Ethernet ® ® flush 64-bit Pentium II or Pentium III controllers. SECC processor, with 512 KB ECC L2 synchronous pipelined burst cache, using Additional onboard features include Teknor's innovative rugged FlexMount™ Universal Serial Bus (USB) ports, mounting bracket (patent pending). serial/parallel ports, and a floppy interface. A 64-bit AGP SVGA CRT controller with 2 MB of SDRAM memory is optional. PCI-943 - Technical Specifications CPU BIOS ® ® • Single Pentium II SECC processor 350, 400, 450 MHz or Pentium III • Award Elite BIOS in Boot Block Flash with recovery code; save CMOS SECC processor 450, 500 MHz in Flash option, and boot from LAN capability • Intel 82440BX AGPset • Auto configuration, extended setup; support for memory hole at • Rugged flush FlexMount™ mounting bracket accommodates 15-16 MB /ISA bus aliasing CC00-E000 address blocking; PnP tables ® Pentium II / III • Setup console redirection to serial port (VT100 mode) with CMOS setup access Bus Interface • Software enable/disable of onboard Ethernet, SCSI • Front Side Bus (100 MHz) • Diskless, keyboardless, and videoless operation extensions; system, • PCI Bus (33 MHz) video and SCSI BIOS shadowing • ISA Bus (8.33 MHz) • Programmable bus and I/O speeds, and memory wait states • High drive ISA buffers to support up to 20-slot backplane • Advanced security feature for floppy and HDD; DMI and HDD S.M.A.R.T. Cache support • 16/16 KB Instruction / Data Level 1 • Advanced Configuration and Power Interface (ACPI 1.0), Advanced • 512 KB internal 64-bit wide SPB non-blocking ECC Level 2 running at Power Management (APM 1.2), advanced thermal management (resume, 1/2 CPU core speed overheat alarm and auto slow down), and Green support Memory Supervisory • Two 168-pin latching DIMM sockets, 64/72-bit • Two-stage software programmable watchdog timer drives NMI on 1st • Up to 512 MB with 2, 4, 8, 16 or 32 M x 64/72, 100 MHz Synchronous stage, system reset on 2nd stage. Time out from 16 msec to 4.5 min. DRAM / Registered SDRAM non-ECC/ECC mode (single bit error • Hardware system monitor (voltages, temperature, fan speed), CPU correction, double bit detection via Intel 82440BX chip set) temperature monitor / alarm; board temperature sensor, power failure/low • All 512 MB cacheable battery detector, and two end-user defined open-drain general purpose Data Path 2 I/Os; SMBus, I C Bus • 64-bit on CPU and video memory bus; 32-bit on PCI bus; 16-bit on • Hardware remote reset from serial port, and console redirection on serial ISA bus port in VT100 mode. Interrupts OS Compatibility • 11 edge sensitive and configurable ® ® ® • PC and MS-DOS™; Windows 3.X; Windows 95; Windows 98; • 4 PCI level sensitive, configurable to any interrupt vector for PnP ® Windows NT 4.0/5.0; QNX™ compatibility Mechanical • All ISA onboard interrupts are PnP compliant • 338 x 122 x 52 mm at CPU / fan (13.32 x 4.80 x 2.06 in. at CPU / fan) DMA Channels (ISA) • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PICMG Rev. 2.0 • Four 8-bit, three 16-bit specifications • Supports scatter / gather, Fast Type-F DMA Power Requirements Flash Memory Supply Voltage Vcc = +5V ±5% / +12V ±5% • 2 Mb (256 KB) Boot Block for BIOS field upgrade ® Pentium II: 350 400 450 • 4 KB Serial EEPROM for user configuration ICC typ.* +5V 5.06A 5.64A 5.80A I/O ICC susp. +5V 3.24A 3.49A 3.56A I/O: SMC FDC37C672 Super I/O +12V 200mA 200mA 200mA USB Ports: Two ® Pentium III: 450 500 Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with ICC typ.* +5V 5.82A 6.24A BIOS selectable IRQs and addressing, serial port 2 BIOS configurable ICC susp. +5V 3.64A 3.69A RS-422/485 +12V 200mA 200mA Parallel Port: One bi-directional with all IEEE 1284 protocols supported Input Power and BIOS selectable IRQs and addressing * Measured with Pentium® II 450 MHz and 64 MB DRAM, keyboard, floppy and hard disk. Floppy Disk: Support for two drives (360 KB to 1.44 MB) Environmental EIDE: PCI EIDE Ultra DMA/33, support for four drives (master/slave Operating Storage and Transit configuration); PIO Mode 4, Bus Master IDE or synchronous DMA mode Temperature: 0° to 55°C/32° to 131°F -40° to +70°C/-40° to 158°F transfers up to 33 MB/s (w/airflow) SCSI: PCI Ultra Fast/Wide SCSI-3 with operation up to 40 MB/s and Humidity (RNC): 5% to 95% @ 40°C/104°F 0% to 95% @ 40°C/104°F data bursts to the host at full PCI speeds (Adaptec AIC 7880) non-condensing non-condensing Ethernet: PCI 10Base-T/100Base-TX (Intel 82558) Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft Shock: 5 G, each axis Video Vibration: 1.5 G, each axis • Frame Accelerated Graphics Port (AGP) SVGA CRT controller with 2 MB SDRAM memory (C&T 69000A) Reliability • Supports CRTs with resolution up to 800 x 600, 16.8 M colors; • MTBF: >72,000 hours @ 20°C / 68°F (MIL-HDBK-217F) 1024 x 768, 64 K colors; or 1280 x 1024, 256 colors, non-interlaced • SCSI termination, USB and mouse / keyboard voltage protected by self-resetting fuses Clock / Calendar • Unique silicon serial number accessible via software • Real-time clock with 256 byte battery backup CMOS RAM • 2 year limited warranty Connectors Designed to meet or exceed: Rear I/O Bracket: PS/2 mouse and keyboard (two 6-pin mini-DIN); CRT Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 (female DB-15 slim); Ethernet (RJ-45 with link/activity indicators) EMI/EMC: FCC 47 CFR Part 15/CISPR22; Headers: USB (10-pin); serial ports (two 10-pin shrouded); parallel port CE Mark to EN55022/EN50082 (26-pin shrouded); floppy (34-pin shrouded); EIDE (two 40-pin shrouded); SCSI-3 (68-pin D-Sub receptacle); PS/2 mouse (4-pin locking); system monitor (14-pin shrouded); CPU fans (two 3-pin locking); SCSI activity LED (2-pin locking); AT keyboard, speaker, reset, EIDE and SCSI activity LEDs (16-pin shrouded); auxiliary power input (4-pin standard HD); external battery (2-pin locking); power button (2-pin locking) Teknor Applicom helps customers speed to market with USA CANADA EUROPE applied computing solutions featuring single board computers Tel.: (450) 437-5682 Tel.: (450) 437-5682 Tel.: +49 8165 77-0 and integrated systems specifically designed for Industrial Fax: (450) 437-8053 Fax: (450) 437-8053 Fax: +49 8165 77-219 Automation, Internet, Telecommunications, Mobile Computing and all types of high-speed, high-availability applications. www.teknor.com • 1.800.387.4222 Specifications subject to change without notice. Teknor Applicom Inc. is a Kontron Group Company. Teknor Applicom Inc. and the Teknor ellipse logo are registered trademarks of Teknor Applicom Inc. All other trademarks are the property of their respective owners. Copyright 1999 by Teknor Applicom Inc. All rights reserved. PCI943 1 11/99