(1/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved The F series FAW is characterized by a wide input voltage range not requiring switching for connections to input voltages of AC.85 to 264V and by the thin type of 25mm in thickness. This series of power supplies are UL/CSA/TÜV approved so as to be used with confidence at the worldwide commercial AC voltages. FEATURES  Thin-type single output power supply with wide input voltage range (AC.100 to 200V; Switching not required).  Compact open frame type (A cover is available as option).  Full product lineup covering 15W to 150W.  LED indicator display function.  Low noise (FCC class B and VDE class B meet). PART NUMBERS AND RATINGS 15W Type 25W Type 50W Type Output voltage(V) Current(A) Part No. Current(A) Part No. Current(A) Part No. 5 3 FAW05-3R0 5 FAW05-5R0 10 FAW05-10R 12 1.3 FAW12-1R3 2.1 FAW12-2R1 4.2 FAW12-4R2 15 1 FAW15-1R0 1.7 FAW15-1R7 3.4 FAW15-3R4 24 0.7 FAW24-0R7 1.1 FAW24-1R1 2.1 FAW24-2R1 100W Type 150W Type Output voltage(V) Current(A) Part No. Current(A) Part No. 5 20 FAW05-20R 30 FAW05-30R 12 8.3 FAW12-8R3 12 FAW12-12R 15 6.6 FAW15-6R6 10 FAW15-10R 24 4.2 FAW24-4R2 6 FAW24-6R0 48 2 FAW48-2R0 2.8 FAW48-2R8 • All specifications are subject to change without notice. (2/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW15W TYPE SPECIFICATIONS AND STANDARDS Part No. FAW05-3R0 FAW12-1R3 FAW15-1R0 FAW24-0R7 ∗1 Rated output voltage and current 5V  3A 12V  1.3A 15V  1A 24V  0.7A Maximum output power W 15 15.6 15 16.8 Input conditions Input voltage Eac V 85 to 264[Rating: 100 to 120, 200 to 240] Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 0.4max./0.3max.[AC.100 to 120V/200 to 240V] Fuse rating A 2[Built-in] ∗2 Surge current A 22max./34max.[Input and output ratings, 25°C, cold start] Leakage current mA 0.5max./0.75max.[Input and output ratings] Efficiency % 70typ. Output characteristics Output voltage Edc V 5 121524 Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4 Maximum output current A 3 1.3 1 0.7 Overvoltage threshold Edc V 6 to 6.9 13.7 to 15.7 17 to 19 27 to 30.5 Overcurrent threshold A 3.3 to 5.5 1.4 to 2.5 1.1 to 2 0.8 to 1.4 Source effect % 2max.(1typ.)[Within the input voltage range] Load effect % 2max.(1typ.)[10 to 100% load] Total effect 4max.(2typ.) Voltage Temperature effect % 2max.(1typ.)[Ambient temperature: 0 to +50°C] stability Drift(Time effect) % 0.5max.(0.1typ.)[25°C, input and output ratings, after input voltage ON for 30min to 8h] Recovery %/ms ±4max./2max.[50 to 100% sudden load change] Ripple Ep-p mV 60max. 80max. 80max. 100max. Ripple noise Ep-p mV 120max. 190max. 220max. 310max. Start up time ms 500max. Hold up time ms 15min. Auxiliary functions Indicator display LED(Green) indicates when voltage output is ON. Overvoltage protection Voltage shut-down type, recovers upon reset(interval approx. 30s). Overcurrent protection Rectangular type, automatic recovery. Remote ON-OFF No Remote sensing No Current balance No Standards Safety standards UL1950-3, CSA950-95(C-UL), EN60950(TÜV) approved. Noise terminal voltage FCC class B[AC.100 to 120V], VDE0871 class B[AC.220 to 240V] meet. Constructions ∗3 ×95×100[H×W×L] / With cover(Option) : 30×95×100[H×W×L] External dimensions mm 25 Weight g 270max. Mounting method Can be attached to 2 sides. Case material Frame: Iron / Cover(Option: 3JC0ZB172-FAW15CA): Iron ∗1 Current rating(maximum output current) is determined for 0 to +50°C. Derating is required when used outside this temperature range. ∗2 The surge current suppression element is a power thermistor. ∗3 Derating is required when the optional cover is attached.  All specifications are subject to change without notice. (3/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW15W TYPE SHAPES AND DIMENSIONS [Detail drawing of terminal block] Nameplate Example of installed on an another R1. 75 system with B portions 2-M3 Screw tap for mounting Printed circuit board 7.5 85±0.7 for mounting 5max. (PCB) 2max. Frame · Please stable completely. 90±0.7 ø3.5 (2.5) for mounting [A-direction view] [Slit(slot) dimensions of frame] 30 2-5max. 15max. 2.5±0.5 25 100 M4×5L R1.75 for mounting B portion 2-5max. Frame 2-M3 Screw tap 85±0.7 7.5 Printed circuit board(PCB) Cover for mounting 97 (Optional) Dimensions in mm A ±1mm : without specified dimensions  Do not insert M3 tap installation screws more than 5mm from the surface of power supply. TERMINAL DESIGNATIONS AND FUNCTIONS L 1 N 2 – 3 + 4 5 Terminal No. Designations and functions 1 AC input terminals(L, N) Connect to AC.100 to 120V or AC. 200 to 240V input line. 2 Frame ground terminal(G) Connect to earth ground. This is connected to the case. 3 DC output terminals(+, –) Connect to load. 4 Output voltage adjustment trim Adjusts output voltage. 5 Operation indicator LED This Green LED becomes indicated when voltage is output.  All specifications are subject to change without notice. 70±0.7 8 10 50 12.5 20 95 8.6 8.5±0.5 8.5±0.5 10 40±0.7 35 UP (4/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW25W TYPE SPECIFICATIONS AND STANDARDS Part No. FAW05-5R0 FAW12-2R1 FAW15-1R7 FAW24-1R1 ∗1 Rated output voltage and current 5V  5A 12V  2.1A 15V  1.7A 24V  1.1A Maximum output power W 25 25.2 25.5 26.4 Input conditions Input voltage Eac V 85 to 264[Rating: 100 to 120, 200 to 240] Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 0.7max./0.45max.[AC.100 to 120V/200 to 240V] Fuse rating A 2.5[Built-in] ∗2 Surge current A 43max./85max.[Input and output ratings, 25°C, cold start] Leakage current mA 0.5max./0.75max.[Input and output ratings] Efficiency % 70typ. Output characteristics Output voltage Edc V 5 121524 Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4 Maximum output current A 5 2.1 1.7 1.1 Overvoltage threshold Edc V 6 to 6.9 13.7 to 15.7 17 to 19 27 to 30.5 Overcurrent threshold A 5.5 to 7.5 2.3 to 3.3 1.9 to 2.8 1.2 to 1.8 Source effect % 2max.(1typ.)[Within the input voltage range] Load effect % 2max.(1typ.)[10 to 100% load] Total effect 4max.(2.6typ.) Voltage Temperature effect % 2max.(1typ.)[Ambient temperature: 0 to +50°C] stability Drift(Time effect) % 0.5max.(0.1typ.)[25°C, input and output ratings, after input voltage ON for 30min to 8h] Recovery %/ms ±4max./2max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 100max. 120max. 150max. Ripple noise Ep-p mV 120max. 190max. 220max. 310max. Start up time ms 500max. Hold up time ms 15min. Auxiliary functions Indicator display LED(Green) indicates when voltage output is ON. Overvoltage protection Voltage shut-down type, recovers upon reset(interval approx. 30s). Overcurrent protection Rectangular type, automatic recovery. Remote ON-OFF No Remote sensing No Current balance No Standards Safety standards UL1950-3, CSA950-95(C-UL), EN60950(TÜV) approved. Noise terminal voltage FCC class B[AC.100 to 120V], VDE0871 class B[AC.220 to 240V] meet. Constructions ∗3 ×95×125[H×W×L] / With cover(Option) : 30×95×125[H×W×L] External dimensions mm 25 Weight g 300max. Mounting method Can be attached to 2 sides. Case material Frame: Aluminum / Cover(Option: 3JC0ZB173-FAW25CA): Iron ∗1 Current rating(maximum output current) is determined for 0 to +50°C. Derating is required when used outside this temperature range. ∗2 The surge current suppression element is a power thermistor. ∗3 Derating is required when the optional cover is attached.  All specifications are subject to change without notice. (5/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW25W TYPE SHAPES AND DIMENSIONS [Detail drawing of terminal block] Example of installed on an another R1. 75 Nameplate system with B portions for mounting Printed circuit board 5max. (PCB) 2max. Frame 2-M3 Screw tap · Please stable completely. ø3.5 for mounting for mounting 110±0.7 [Slit(slot) dimensions of frame] [A-direction view] 115±0.7 7.5 Cover(Optional) 15max. 30 125 2.5 25 Frame 2-5max. R1.75 for mounting B portion 2-5max. M4×5L 110±0.7 7.5 Printed circuit board(PCB) 122 2-M3 Screw tap A for mounting Dimensions in mm ±1mm : without specified dimensions  Do not insert M3 tap installation screws more than 5mm from the surface of power supply. TERMINAL DESIGNATIONS AND FUNCTIONS L 1 N 2 – 3 + 4 5 Terminal No. Designations and functions 1 AC input terminals(L, N) Connect to AC.100 to 120V or AC. 200 to 240V input line. 2 Frame ground terminal(G) Connect to earth ground. This is connected to the case. 3 DC output terminals(+, –) Connect to load. 4 Output voltage adjustment trim Adjusts output voltage. 5 Operation indicator LED This Green LED becomes indicated when voltage is output.  All specifications are subject to change without notice. 12.5 70±0.7 8 10 55 12.5 20 95 8.6 10 8.5±0.5 8.5±0.5 35 40±0.7 UP (6/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW50W TYPE SPECIFICATIONS AND STANDARDS Part No. FAW05-10R FAW12-4R2 FAW15-3R4 FAW24-2R1 ∗1 Rated output voltage and current 5V  10A 12V  4.2A 15V  3.4A 24V  2.1A Maximum output power W 50 50.4 51 50.4 Input conditions Input voltage Eac V 85 to 264[Rating: 100 to 120, 200 to 240] Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 1.2max./0.7max.[AC.100 to 120V/200 to 240V] Fuse rating A 3[Built-in] ∗2 Surge current A 45max./90max.[Input and output ratings, 25°C, cold start] Leakage current mA 0.5max./0.75max.[Input and output ratings] Efficiency % 76typ. Output characteristics Output voltage Edc V 5 12 15 24 Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4 Maximum output current A 10 4.2 3.4 2.1 Overvoltage threshold Edc V 6 to 6.9 13.7 to 15.7 17 to 19 27 to 30.5 Overcurrent threshold A 10.5 to 12 4.4 to 5.1 3.6 to 4.1 2.2 to 2.6 Source effect % 2max.(1typ.)[Within the input voltage range] Load effect % 2max.(1typ.)[10 to 100% load] Total effect 4max.(2typ.) Voltage Temperature effect % 2max.(1typ.)[Ambient temperature: 0 to +50°C] stability Drift(Time effect) % 0.5max.(0.1typ.)[25°C, input and output ratings, after input voltage ON for 30min to 8h] Recovery %/ms ±4max./2max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 100max. 120max. 150max. Ripple noise Ep-p mV 120max. 190max. 220max. 310max. Start up time ms 500max. Hold up time ms 15min. Auxiliary functions Indicator display LED(Green) indicates when voltage output is ON. Overvoltage protection Voltage shut-down type, recovers upon reset(interval approx. 30s). Overcurrent protection Rectangular type, automatic recovery. Remote ON-OFF No Remote sensing Yes Current balance No Standards Safety standards UL1950-3, CSA950-95(C-UL), EN60950(TÜV) approved. Noise terminal voltage FCC class B[AC.100 to 120V], VDE0871 class B[AC.220 to 240V] meet. Constructions ∗3 ×95×165[H×W×L] / With cover(Option) : 31×95×165[H×W×L] External dimensions mm 25 Weight g 450max. Mounting method Can be attached to 2 sides. Case material Frame: Aluminum / Cover(Option: 3JC0ZB174-FAW50CA): Iron ∗1 Current rating(maximum output current) is determined for 0 to +50°C. Derating is required when used outside this temperature range. ∗2 The surge current suppression element is a power thermistor. ∗3 Derating is required when the optional cover is attached.  All specifications are subject to change without notice. (7/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW50W TYPE SHAPES AND DIMENSIONS [Detail drawing of terminal block] Example of installed on an another 2-M3 Screw tap Nameplate system with B portions for mounting Printed circuit board 15 140±0.7 5max. (PCB) 2max. Frame · Please stable completely. (2.5) 155±0.7 7.5 ø3.5 R1.75 for mounting for mounting [Slit(slot) dimensions of frame] [A-direction view] 31 15max. 25 165 2.5±0.5 2-5max. 2-5max. 2-M3 Screw tap for mounting M4×7L B portion R1.75 for mounting Frame 13 Printed circuit board Cover 145±0.7 (PCB) (Optional) Dimensions in mm 162 ±1mm : without specified dimensions A  Do not insert M3 tap installation screws more than 5mm from the surface of power supply. TERMINAL DESIGNATIONS AND FUNCTIONS L 1 N 2 –S – 3 + +S 6 5 4 Terminal No. Designations and functions 1 AC input terminals(L, N) Connect to AC.100 to 120V or AC. 200 to 240V input line. 2 Frame ground terminal(G) Connect to earth ground. This is connected to the case. 3 DC output terminals(+, –) Connect to load. 4 Output voltage adjustment trim Adjusts output voltage. 5 Operation indicator LED This Green LED becomes indicated when voltage is output. These terminals are used to compensate voltage loss from the output terminal to a load. 6 Remote sensing terminals(+S, –S) Normally they are shorted with a metal bar.  All specifications are subject to change without notice. 15 75±0.7 15 40 12.5 95 20 8.6 8.5±0.5 10 8.5±0.5 35±0.7 30 UP (8/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW100W TYPE SPECIFICATIONS AND STANDARDS Part No. FAW05-20R FAW12-8R3 FAW15-6R6 FAW24-4R2 FAW48-2R0 ∗1 Rated output voltage and current 5V  20A 12V  8.3A 15V  6.6A 24V  4.2A 48V  2A Maximum output power W 100 99.6 99 100.8 96 Input conditions Input voltage Eac V 85 to 264[Rating: 100 to 120, 200 to 240] Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 2.4max./1.6max.[AC.100 to 120V/200 to 240V] Fuse rating A 5[Built-in] Surge current A 25max./50max.[Input and output ratings, 1st surge current, reset after 30s minimum.] Leakage current mA 0.5max./0.75max.[Input and output ratings] Efficiency % 78typ. Output characteristics Output voltage Edc V 5 12 15 24 48 Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4 43.2 to 52.8 Maximum output current A 20 8.3 6.6 4.2 2 Overvoltage threshold Edc V 6 to 6.9 13.7 to 15.7 17 to 19 27 to 30.5 53.5 to 60 Overcurrent threshold A 21 to 24 8.7 to 10 7 to 8 4.4 to 5.2 2.1 to 2.4 Source effect % 2max.(1typ.)[Within the input voltage range] Load effect % 2max.(1typ.)[10 to 100% load] Total effect ±2max.(±1typ.) Voltage Temperature effect % 2max.(1typ.)[Ambient temperature: 0 to +50°C] stability Drift(Time effect) % 0.5max.(0.1typ.)[25°C, input and output ratings, after input voltage ON for 30min to 8h] Recovery %/ms ±4max./1max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 100max. 120max. 150max. 260max. Ripple noise Ep-p mV 120max. 190max. 220max. 310max. 530max. Start up time ms 200max. Hold up time ms 15min. Auxiliary functions Indicator display LED(Green) indicates when voltage output is ON. Overvoltage protection Voltage shut-down type, recovers upon reset after roughly 90/120s[AC.120/240V]. Overcurrent protection Rectangular type, automatic recovery. Remote ON-OFF No Remote sensing Yes Current balance No Standards Safety standards UL1950-3, CSA950-95(C-UL), EN60950(TÜV) approved. Noise terminal voltage FCC class B[AC.100 to 120V], VDE0871 class B[AC.220 to 240V] meet. Constructions ∗2 ×95×200[H×W×L] / With cover(Option) : 40×95×200[H×W×L] External dimensions mm 35 Weight kg 1max. Mounting method Can be attached to 2 sides. Case material Frame: Aluminum / Cover(Option: 2JC0ZG043-FGW100CA): Iron ∗1 Current rating(maximum output current) is determined for 0 to +50°C. Derating is required when used outside this temperature range. ∗2 Derating is required when the optional cover is attached.  All specifications are subject to change without notice. (9/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW100W TYPE SHAPES AND DIMENSIONS Nameplate 170±0.7 15 [Detail drawing of terminal block] 4-M3 Tap for mounting 15max. 200 17 40 170±0.7 35 4-Height of mounting screw 4-Height of mounting screw 5max. M4×7L 5max. 4-M3 Tap for mounting Cover Dimensions in mm (Optional) ±1mm : without specified dimensions  Do not insert M3 tap installation screws more than 5mm from the surface of power supply. TERMINAL DESIGNATIONS AND FUNCTIONS L 1 N 2 –S – 3 + 6 +S 5 4 Terminal No. Designations and functions 1 AC input terminals(L, N) Connect to AC.100 to 120V or AC. 200 to 240V input line. 2 Frame ground terminal(G) Connect to earth ground. This is connected to the case. 3 DC output terminals(+, –) Connect to load. 4 Output voltage adjustment trim Adjusts output voltage. This Green LED becomes indicated when voltage is output. 5 Operation indicator LED It is mounted on a miniature base. These terminals are used to compensate voltage loss from the output terminal to a load. 6 Remote sensing terminals(+S, –S) Normally they are shorted with a metal bar.  All specifications are subject to change without notice. 75±0.7 8 10 95 20±0.7 8.6 10 (10/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW150W TYPE SPECIFICATIONS AND STANDARDS Part No. FAW05-30R FAW12-12R FAW15-10R FAW24-6R0 FAW48-2R8 ∗1 Rated output voltage and current 5V  30A 12V  12A 15V  10A 24V  6A 48V  2.8A Maximum output power W 150 144 150 144 134.4 Input conditions Input voltage Eac V 85 to 264[Rating: 100 to 120/200 to 240] Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase) Input current A 3.5max./2max.[AC.100 to 120V/200 to 240V] Fuse rating A 6.3[Built-in] Surge current A 25max./50max.[Input and output ratings, 1st surge current, reset after 30s minimum.] Leakage current mA 0.5max./0.75max.[Input and output ratings] Efficiency % 78typ. Output characteristics Output voltage Edc V 5 12 15 24 48 Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4 43.2 to 52.8 Maximum output current A 30 12 10 6 2.8 Overvoltage threshold Edc V 6 to 6.9 13.7 to 15.7 17 to 19 27 to 30.5 53.5 to 60 Overcurrent threshold A 32 to 36 13 to 15 11 to 13 6.3 to 7.5 3 to 3.5 Source effect % 2max.(1typ.)[Within the input voltage range] Load effect % 2max.(1typ.)[10 to 100% load] Total effect ±2max.(±1typ.) Voltage Temperature effect % 2max.(1typ.)[Ambient temperature: 0 to +50°C] stability Drift(Time effect) % 0.5max.(0.1typ.)[25°C, input and output ratings, after input voltage ON for 30min to 8h] Recovery %/ms ±4max./1max.[50 to 100% sudden load change] Ripple Ep-p mV 80max. 100max. 120max. 150max. 260max. Ripple noise Ep-p mV 120max. 190max. 220max. 310max. 530max. Start up time ms 200max. Hold up time ms 15min. Auxiliary functions Indicator display LED(Green) indicates when voltage output is ON. Overvoltage protection Voltage shut-down type, recovers upon reset after roughly 90/120s[AC.120/240V]. Overcurrent protection Rectangular type, automatic recovery. Remote ON-OFF No Remote sensing Yes Current balance No Standards Safety standards UL1950-3, CSA950-95(C-UL), EN60950(TÜV) approved. Noise terminal voltage FCC class B[AC.100 to 120V], VDE0871 class B[AC.220 to 240V] meet. Constructions ∗2 ×95×200[H×W×L] / With cover(Option) : 55×95×200[H×W×L] External dimensions mm 51 Weight kg 1.2max. Mounting method Can be attached to 2 sides. Case material Frame: Aluminum / Cover(Option: 2JC0ZG044-FGW150CA): Iron ∗1 Current rating(maximum output current) is determined for 0 to +50°C. Derating is required when used outside this temperature range. ∗2 Derating is required when the optional cover is attached.  All specifications are subject to change without notice. (11/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved FAW150W TYPE SHAPES AND DIMENSIONS Nameplate 15 170±0.7 [Detail drawing of terminal block] 4-M3 Screw tap for mounting 15max. 200 55 17 170±0.7 51 4-Height of mounting screw 4-Height of mounting screw 15max. 5max. M4×9L Cover Dimensions in mm 4-M3 Screw tap ±1mm : without specified dimensions for mounting (Optional)  Do not insert M3 tap installation screws more than 5mm from the surface of power supply. TERMINAL DESIGNATIONS AND FUNCTIONS L 1 N 2 –S – + 7 + + 6 +S 5 4 Terminal No. Designations and functions 1 AC input terminals(L, N) Connect to AC.100 to 120V or AC. 200 to 240V input line. 2 Frame ground terminal(G) Connect to earth ground. This is connected to the case. 3 DC output terminals(+, –) Connect to load. 4 Output voltage adjustment trim Adjusts output voltage. This Green LED becomes indicated when voltage is output. 5 Operation indicator LED It is mounted on a miniature base. These terminals are used to compensate voltage loss from the output terminal to a load. 6 Remote sensing terminals(+S, –S) Normally they are shorted with a metal bar. Connect a load line to this terminal. Allowable current per pin is 20A max. 7 Direct output terminal(+, +, –, –) A use of two pins each is recommended.  All specifications are subject to change without notice. 75±0.7 8 30±0.7 10 95 8.6 10 (12/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved BLOCK DIAGRAM 15W AND 25W TYPES Surge Over- Input Input Input Output rectifying L + current current filter AC input rectifier smoothing and DC output limiting detection N – circuit circuit circuit smoothing circuit circuit circuit Power switching circuit Drive circuit Control circuit Control circuit Overcurrent detection circuit 50W, 100W AND 150W TYPES +S Surge Over- Input Input Input Output rectifying L + current current ∗ and DC output AC input filter rectifier smoothing N limiting detection – circuit circuit circuit smoothing circuit circuit circuit –S Power switching circuit Drive circuit Control circuit Control circuit Overcurrent detection circuit ∗ The 150W type provides 2 each + and – output terminals. COMMON SPECIFICATIONS Temperature and humidity Operating(°C) 0 to +60[Derating is necessary when operating environment temperature exceed 50°C.] Temperature range Storage(°C) –25 to +75 Operating(%)RH Humidity range 20 to 95[Maximum wet-bulb temperature: 35°C, without dewing] Storage(%)RH ∗ Vibration and shock 5 to 10Hz All amplitude 10mm[3 directions, each 1h] Vibration 2 10 to 55Hz Acceleration 19.6m/s (2G)[3 directions, each 1h] 2 Acceleration 196m/s (20G)[3 directions, each 3 times] Shock Pulse duration 11±5ms Withstand voltage and insulation resistance Input terminal to ground terminal(G) Withstand voltage Eac: 2kV, 1min[Normal temperature, normal humidity, cutout current 10mA] Input terminal to output terminal Input terminal to ground terminal(G) Insulation resistance Input terminal to output terminal Edc: 500V, 100MΩ min. [Normal temperature, normal humidity] Output terminal to ground terminal(G) ∗ The specifications are intended for a product with a base attached, but not for a product installed with angle bracket.  All specifications are subject to change without notice. (13/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved OUTPUT POWER-AMBIENT TEMPERATURE(DERATINGS) HANGING INSTALLATION (applicable to 15W, 25W, and 50W types) 100 Recesses are provided at two places on an L-shaped frame. Use 80 them to mount the power supply from its surface. 70 With cover 60 M3 40 Available operating range (outside of warranty) 20 0 –10 0 10 20 30 40 50 60 70 Ambient temperature(˚C) SURGE CURRENT, START UP / HOLD UP TIMES Example: FAW05-10R Input voltage: AC.100V 26A(60A) Load: 100% Surge current Temperature: 25˚C (Input waveform) ( ): AC.200V input Input OFF Input ON (Output waveform) 5mm max. Use the notched and mounting holes for stand-up installation of the power supply. Delay time 2ms 18ms Rise time Hold up time Start up time 220ms Example: FAW05-20R M3 Input voltage: AC.100V Load: 100% Temperature: 25˚C 15A Input OFF Input ON A screwdriver may touch a component on the PC board Hold up time when rotating the M3 screw. Start up time 45ms 20ms Be careful not to apply any excessive force.  All specifications are subject to change without notice. Output power(%) 2mm max. (14/14) 001-01 / 20030504 / ea121_faw.fm F Series FAW(15 to 150W) Power Supplies AC Input Single Output, General-Purpose UL/CSA/TÜV Approved INSTALLATION (2)-2. Component surface (downward) For natural cooling, apply either of the following installation meth- (A) ods so as to provide a thermal convection: (1) Standard installation (2) Other installations on component surface (upward). In addition, maintain a 15mm min. distance between the compo- nent (cover) surface and surrounding equipment, etc. (B) (1) Standard Installation (1)-1. Angle bracket (downward) (A) (B) • This type of installation is inhibited due to a difficulty of the thermal 15mm convection. min. 15mm min. (2)-3. Angle bracket (upward) SurfaceB SurfaceB (A) (B) SurfaceA SurfaceA SurfaceA SurfaceA • For the installation in (A), arrange a bearer for preventing vibrations on the surface B of the angle bracket or in a direction indicated by an arrow. (2) Other Installations 15mm 15mm min. (2)-1. Component surface (upward) min. (A) SurfaceB SurfaceB 15mm min. • This type of installation is inhibited due to a difficulty of the thermal convection. SurfaceB SurfaceA COVER The cover is separately available. Please order it with the follow- ing model names: Type Cover model No. 15W 3JC0ZB172-FAW15CA (B) 25W 3JC0ZB173-FAW25CA 50W 3JC0ZB174-FAW50CA 100W 2JC0ZG043-FGW100CA 15mm min. 150W 2JC0ZG044-FGW150CA SurfaceA SurfaceB • For the installation in (B), arrange a bearer for preventing vibrations on the surface B of the angle bracket or in a direction indicated by an arrow. • All specifications are subject to change without notice.