PHOTOELECTRIC SENSOR DIGITAL FIBER SENSOR FX-300 SERIES Conforming to UL Recognition EMC Directive Constant advances achieving the highest level of performance in its class The FX-300 series of next-generation fiber sensors provides the highest level of sensing performance in its class ‘Stable sensing’, ‘high sensing performance’, ‘easy operation’, ‘improved ease of maintenance’ and ‘preservation of the environment’ are the five concepts underlying the new FX-300 series! June 2004 FX-301 advances even further (Refer to p.34 for details) High-function type FX-305 Standard type FX-301 Ultra high-speed type FX-301-HS 1 APC circuit has been added, in Equipped with an light emitting addition to the four-chemical amount selection function. Plus, a emitting element. 4-digit full ‘9999’ display (FX-305) and 35 !s ultra high-speed response (FX-301-HS) are also provided. FX-300SERIES Concept 1 Concept 2 High Stability Superior Performance P.3 P.4 Concept 5 Concept 3 Only two switches, the Eco-friendly Easy operation large MODE key and the large jog switch, are required for operation. P.8 P.6 Lead-free solder used is gentle on the environment. P.7 Concept 4 Easy Maintenance Sensor setup and control can be carried out externally using an upstream communica- tion unit. Wide lineup Full range of fibers P.9 Description of different fibers and performance for each industry Guide for each industry LCD • Semiconductor / P.9 to P.12 Electronic component • Automatic assembly / P.13 to P.14 Pharmaceutical • Packaging / P.15 2 Concept 1 High Stability High Stability APC circuit Double coupling lens Four-chemical emitting element Stability enhancement Stable sensing over long and short periods Even greater sensing range FX-301 FX-301-HS FX-305 FX-301/B/G/H FX-301-HS FX-305 In addition to a ‘four-chemical emitting element’ which suppresses changes in the light emitting Adoption of a ‘double coupling lens’ that element over time so that a stable level of light emission can be maintained over long periods, a increases emission efficiency to its ‘APC (Auto Power Control) circuit’ has also been adopted afreshly. The light emitting amount maximum limits and greatly increases can be controlled in minute degrees so that even changes occurring over very short periods sensing range. Sensing ranges with small can be handled, allowing stable sensing performance by suppressing deviations in light emitting diameter fibers and ultra-small diameter amounts caused by changes in the ambient environment that could not previously be fibers, which have become very popular due suppressed. to the miniaturization of chip components, have been increased by 50 % over previous values achieved with other amplifiers. ● Stable sensing comparison ● Conventional fiber sensors (Without lens) FX-301 Short-term stability FX-301-HS FX-305 Three-chemical Deviation emitting element, Without APC Disperses the light reduces Long-term stability emitting efficiency. Time ● Double coupling lens The lens concentrates the light, greatly increasing emitting efficiency. 3 Light emitting amount Concept 2 Superior Performance Superior Performance 4 times as fast as Light-emitting amount selection Ultra high-speed 35 ¨s response before FX-301 FX-301-HS FX-305 FX-301-HS If the light receiving level becomes saturated during close- Ultra high-speed 35 !s response. Even range sensing or when sensing transparent or minute small objects moving at high speeds can be Level 4 objects, you can adjust the light emitting amount of the sensed. In addition, at 65 !s the FX-301 sensor to stabilize sensing without needing to change the standard type is also twice as fast as response time. Sensing that previously required the response previous models. Level 3 time or fibers to be changed can now be set much more easily using this function. Ultra high-speed response [Light receiving level saturated] [Stable sensing] Level 2 Actual digit difference: C A Upper display limit Actual digit difference: C’ Level 1 4000 Light emitting A’ amount B changed Saturated digit OFF B’ difference: D Light emitting amount can be changed Ultra high-speed type FX-301-HS without changing (H-SP mode) response time 2.5 times previous Large display 9999 models 35¨s FX-305 Large display with 4 digits (9999). With a � greater difference in digit value than Digit difference comparison Standard type FX-301, High-function type FX-305 previous models, threshold values can be (H-SP mode) Example Digit difference between object A and object B set in units of 1 digit up to maximum 9999. 65¨s Threshold setting can now be done more Previous models easily and accurately. FX-305 4000 9999 Previous model 150¨s Digit difference: Small Digit difference: Large (During STDF, LONG and U-LG modes) 4 Concept 2 Superior Performance Superior Performance Simplified systems using new operating modes Equipped with 5 types timers FX-305 FX-305 A window comparator mode and differential sensing mode have been added. These modes The FX-305 includes the same ON-delay / make it easy to carry out sensing tasks that previously required multiple sensors or involved OFF-delay / ONE-SHOT timer as the complex threshold settings. FX-301(-HS), as well as an ON-delay • OFF- delay timer and an ON-delay • ONE-SHOT ● Window comparator mode ● Differential sensing mode timer. A wide variety of timer control operations can be carried out by these fiber sensors alone. Timer period: Output 1 0.5 to 9,999 ms (variable) Output 2 0.5 to 500 ms (variable) Time chart For L-ON Beam- received Sensing Beam- condition interrupted ON T1 ON-delay OFF ON T1 T1 Lower light amounts due to dust OFF-delay Tray absent IC present Tray present OFF Because sensing is not possible at normal sensitivity settings, sensitivity must be reset. OFF ON OFF ON T1 T1 Incident ONE-SHOT light OFF intensity ON T1 T2 Upper and lower limits for threshold values ON ON-delay • OFF ON can be set so that the incident light intensity OFF-delay ON can turn on and off within those ranges. Sensing of only sudden changes in light amounts T1 T2 Only the target objects are sensed. Single output is used, so that only one ON-delay • OFF No need to reset the sensitivity. ONE-SHOT cable is required, and no PLC processing is required either. Multi-purpose 2-output FX-305 New Alarm output: Output 2 is set concurrently Two independent output channels are provided, with output 1 so that one sensor can be used for control Drops in light amounts due to problems tasks that previously required two sensors. In such as broken fibers or dirty tips are addition, the second output channel can be �V detected and output. When output 1 used for simple self-diagnosis and alarm output, 0 V threshold value teaching is carried out with so that ease of maintenance is improved. FX-305 Output 1 the FX-305, output 2 is set concurrently Output 2 with the setting shifted by the amount of ● Comparison with previous models Example Sensing meandering of sheets surplus. Drops in surplus amounts of light intensity due to dust or other particles can therefore ON Too far left be detected and output. OUT 1 OFF OK ON OUT 2 Too far right OFF [Previous models] Light amount drops Initial setting and settings are reset 2 sensors needed Incident light intensity Output 2 [FX-305] threshold value 15 % 1 sensor is enough! Actual position automatically 15 % Output 1 automatically Meandered position threshold value In conjunction with teaching amount 5 Light receiving amount Incident light intensity Easy operation Concept 3 Easy Operation Operation Digital Large Large indicator display jog switch MODE key (FX-301) Stability MODE indicator indicator Even beginners can quickly learn how to use the MODE NAVI FX-301/B/G/H FX-301-HS FX-305 RUNn L/D ONn MODE NAVI uses six RUN L/D This is the sensing mode. This mode allows the selection of TEACH TIMER indicators to display the Incident light level is displayed in the output operation as either Light-ON ADJ PRO amplifier’s basic operations. digital display. or Dark-ON. The current operating mode RUN L/D TEACHn TIMERn can be confirmed at a TEACH This mode is for setting the TIMER This mode permits the choice of threshold value. glance, so even a first time ADJ using or not using the timer. PRO user can easily operate the PROn RUN L/D ADJn amplifier without becoming This mode allows the selection of further TEACH In this mode, the threshold value, TIMER advanced functions, such as the copying of confused. once set, may be fine-tuned. ADJ PRO individual settings and the memory functions. The use of only two switches makes for very simple operations Easy confirming of threshold value settings FX-301/B/G/H FX-301-HS FX-305 FX-301 FX-301-HS FX-305 Only two switches, the large jog switch and the large MODE key, are required for operation. The threshold value can be confirmed by Depressing the large MODE key sets the ‘mode selection’ and ‘mode cancel’ functions. The turning the jog switch even during RUN large jog switch is used to select from the detailed functions available within each mode, as mode. well as to change numerical values after the mode has been chosen. ● Large MODE key ● Large jog switch 1 2 3 Jog switch is turned Left: FX-301(-HS) Right: Output 2 for Output 1 for FX-305 FX-305 Moving the switch Pressing the Pressing the switch selects from side to side switch then or cancels the operating allows items to be confirms the mode selected selected setting The threshold value is displayed Improved workability! Key lock function prevents Data bank switching and teaching can be carried out externally accidental setting changes FX-301 FX-305 FX-301/B/G/H FX-301-HS FX-305 Key lock setting The FX-CH2 external input unit (optional) Jog switch MODE key can be used to carry out teaching and data bank switching operations externally without needing to operate the digital fiber sensors directly. This greatly improves ease of workability during setup. Input signal This disables input from the jog switch and MODE key, thus preventing operators from accidentally changing settings. 6 Easy Maintenance Concept 4 Easy Maintenance Communication unit improves equipment starting up and maintenance FX-301 FX-305 upstream communication unit SC-GU1-485 The communication unit enables inputs to We now offer remote maintenance for sensors! the digital fiber sensors (such as teaching Also reduces the work required to the and data bank switching) to be carried out system to start running! via a PLC, and also allows confirming of the incident light intensity an output status for the fiber sensors. This greatly improves workability during equipment starting up and maintenance. Control and settings can be carried out remotely Setting and confirming incident light intensity for digital fiber sensors (FX-301/305) that are scattered inside and outside equipment can be carried out remotely for all sensors by using the SC-GU1-485, which greatly improves ease of operations such as monitoring equipment that is [Communicable commands] Device A monitor Menu Back running and also equipment starting and maintenance. ● Sensor incident Line1 Line2 Line3 Line4 light intensity End unit Incident light Output ● Sensor settings intensity Liquid level detection sensor 1 verification Tank A Liquid level detection sensor 2 ● Sensor output status ● Threshold value Passage confirmation sensor Loader A settings, etc. Mapping sensor To PLC or PC RS-485 The sensor settings and Ideal for workplaces such as ( ) communication operation can be semiconductor and LCD checked on the touch manufacturing lines where screen, greatly improving there are restrictions on Digital fiber sensor 24 V DC ease of operation! operators entering and exiting Main unit FX-301, FX-305 power supply FX-301 FX-305 External input unit FX-CH2 Teaching and data bank switching for up to Support for stable sensing and smooth setup changes! a maximum of 16 digital fiber sensors � Setup changes (external automatic teaching / data bank switching) (FX-301 and FX-305) can be carried out all at once using an external device such as a Digital fiber sensor settings can be changed using input from a touch screen or switch, so that PLC, touch screen or switch. production line setup changes can be carried out more easily. � External teaching Full-auto teaching is recommended for teaching when the sensing object is changed without stopping the line. � Data bank switching Settings such as output operations (L-ON / D-ON) and timer operations can be recorded in the digital fiber sensor’s data bank and switching can be carried out externally. m Up to 3 files can be stored. � FX-CH2 function list Teaching input The following types of external teaching can be carried out. ● Full-auto teaching ● Limit teaching ‘�’ � Product lineup ● Limit teaching ‘�’ ● 2-level teaching Connector for input device CN-EP1 [1 pc. included with FX-CH2(-P)] Data bank switching input External input unit FX-CH2(-P) Switching between 3 channels of data banks and loading and saving of all channels at once Quick-connection cable can be carried out. CN-73-C� (optional) S1 Key lock setting input S2 �V S3 MODE The key lock function that prevents incorrect COM. 0 V operations by operators can be set on and off. 7 Wiring- and labor-saving design allows side- An optical communication function allows up m by-side configuration for up to sixteen units to 16 sensors to be adjusted simultaneously FX-301/B/G/H FX-301-HS FX-305 FX-301/B/G/H FX-305 The optical communication function allows the data that is currently One unit can be used as either a main unit or sub unit set to be copied and saved all at once for all amplifiers connected The amplifier unit can be used as either a main unit or a sub unit. together from the right side. This greatly reduces troublesome setup This feature allows for easy mounting in the side-by-side tasks and makes setup much smoother. In addition, troublesome configuration. The main and sub unit functions are distinguished adjustment operations at only by the proper use of the main cable and the sub cable. times such as when Moreover, inventory management and maintenance is simplified. replacing sensors can also be carried out easily and data can also Identical part numbers eliminate the need for Single copy & save operation for all amplifiers be copied and stored costly inventory management labor using the optical communication function. m Use the optical communication function for only the same types of sensors. Furthermore, the FX-301-HS is not equipped with optical communication function capability. Refer to p. 30 for details. Settings can be entered directly using numerical input Sub cable Every function can be directly set merely by the input of a four digit code (numbers) from the code table. This convenient feature is easy to set up. In the event that settings are accidentally changed at the operating site, merely entering the correct code can restore the original settings. This results in easy and quick maintenance. Main cable (4-core) First digit: Settings for response time and hysteresis CN-74-C� FX-305 Second digit: Settings for L/D ON and display mode Sub cable (2-core) CH-72-C� Main cable (3-core) CN-73-C� Main cable FX-301(-HS) Sub cable (1-core) Fourth digit: Timer period settings CH-71-C� Third digit: Settings for Adjust lock and timer Eco-friendly Concept 5 Eco-friendly Lead-free solder used is gentle on the environment Reduced power consumption possible (ECO mode) SUNX promotes the use of lead-free materials in all of its sensor This turns off the digital display to reduce power consumption to manufacturing processes including those used for the FX-300 approximately 600 W or less. (960 W is consumed when the display series of digital fiber sensors. is on.) Selectable cable length Environmentally friendly packaging Used for intermediate terminal block Made available are 3 lengths, With regard to effects on the To PLC 1 m 3.281 ft, 2 m 6.562 ft, environment, we only utilize and 5 m 16.404 ft, to suit the simplest of packaging Directly connected to the PLC your application require- methods greatly contributing To PLC 5 m 16.404 ft cable length type ments. This helps reduce to the reduction in wastes the waste caused by cutting generated by your worksite. 5 m 16.404 ft cables and lightens the Also, the bags are made of installation workload. polyethylene, a substance 2 m 6.562 ft that doesn’t give off polluting gases when burned. Polyethylene packaging 1 m 3.281 ft 8 FOR LCD • SEMICONDUCTOR INDUSTRY Guide to fibers and characteristics Improved stability over long and short periods FX-301 FX-301-HS FX-305 A four-chemical emitting element for stable sensing over long periods has been added, in addition to an APC (Auto Power Control) circuit that suppresses fluctuations in light amount over short periods. The light amount becomes stable a short period after the power is turned on, so setup time can be reduced. ● Stable sensing comparison FX-301(-HS) FX-305 Short-term stability APC circuit Three-chemical emitting element, Deviation Without APC Double coupling lens Long-term stability Four-chemical emitting element Time Mapping fiber FT-KV1, FT-KV8, FR-KV1 This ultra-narrow optical beam fiber is ideal for mapping wafers. 1.5 mm 0.059 in thickness FT-KV1 Aperture angle 2 � FT-WKV8, FT-KV8 Retroreflective type FR-KV1 W2�H1.5�D20 mm W0.079�H0.059 Aperture angle for the ultra-narrow With a thickness of 2.3 mm 0.091 in, this �D0.787 in ultra-compact size allows optical beam is 2 � or less. The light does fiber can be installed almost anywhere, this sensor to be installed even in thin not spread much at all, so that stable and it is a retroreflective type so optical 200 mm 7.874 in wafer handlers. sensing can be obtained. beam axis alignment is simple. Heat-resistant fiber FT-H�, FD-H� A variety of types are available, including a convergent reflective type for accurately sensing glass substrates, and a type with a bending radius of 10 mm 0.394 in that hardly takes up any space. IC detection within a high temperature handler Glass substrate detection Glass substrate detection Flexible type FT-H20W-M2 Heat-resistant 350 �C �662 �F FD-H35-M2 Convergent reflective type FD-H30-L32, FD-H18-L31 Withstands temperatures of �200 �C Can be used in temperatures ranging from Accurately senses glass substrates at �392 �F and has a bending radius of �60 to �350 �C �76 to �662 �F. Stable high temperatures of �300 �C �572 �F. 10 mm 0.394 in, this fiber can be installed sensing is obtained even at temperatures almost anywhere. exceeding �300 �C �572 �F. 9 • FOR LCD SEMICONDUCTOR INDUSTRY Light emitting amount FOR LCD • SEMICONDUCTOR INDUSTRY Guide to fibers and characteristics Large display 9999 FX-305 Large display with 4 digits (9999). Extremely fine settings for detecting minute changes can be made to provide more stable sensing for items such as transparent objects. Contact type liquid level detection fiber FD-F8Y [Example of using liquid level detection fiber sensor (LONG mode)] Previous display FX-305 Resist tank Liquid absent 500 Liquid absent 2000 460 1840 Liquid present 40 Liquid present 160 Extra display width has been increased! Around liquids • Chemical-resistant fiber FT-Z802Y, FD-F705, FT-F902 Chemical-resistant fiber with fluorine resin coatings over the whole of the fiber, leak detection fiber that quickly sense leaks such as from detergents, and liquid detection fiber that accurately sense liquid levels are among the lineup of fibers that are ideal for liquid sensing. Detecting wafer cassette in cleaning tank Detecting leak liquid in cleaning tank Detecting liquid presence within a pipe (Note) (Note) Cleaning tank Leak FT-Z802Y Wafer Liquid cassette FD-F705 FT-F902 Chemical-resistant fiber FT-Z802Y Leak detection fiber FD-F705 Liquid detection fiber FT-F902 Fluorine resin coating allows fiber to be The unique effect of capillarity enables Even if pipe diameters and thicknesses used with confidence even where contact reliable detection of small leaks and vary, the center of the beam axis always with chemicals may occur. viscous liquids. follows a straight line along the pipe, so that the setup environment has almost no effect on sensing. Note: Use the FX-301-F amplifier that is specially designed for leak / liquid detection. For details, please refer to the ‘sensor general catalog 2003-2004’ or ‘SUNX homepage’ (http://www.sunx.co.jp/). Vacuum-resistant fiber FT/FD-�V The vacuum-resistant fiber lineup lets you select the best fiber for the application. Vacuum-resistant convergent reflective type Withstanding temperatures of up to �300 �C �572 �F, a bending radius of 18 mm FD-H30-L32V-S 0.709 in and bending durability of up to Vacuum-resistant long-range • Sensing range: 0 to 8 mm 0 to 0.315 in (LONG mode) 100,000 times are features that greatly reflective type fiber improve ease of use. FD-H30-KZ1V-S Vacuum-resistant long-range reflective type FD-H30-KZ1V-S Vacuum-resistant • Sensing range: 20 to 200 mm 0.787 to 7.874 in (LONG mode) expansion lens FV-LE1 Vacuum-resistant thru-beam type Vacuum-resistant convergent Vacuum-resistant reflective type fiber FT-H30-M1V-S thru-beam type fiber FD-H30-L32V-S • Sensing range: 250 mm 9.843 in (LONG mode) FT-H30-M1V-S Vacuum-resistant side-view lens FV-SV2 • Sensing range greatly increased without taking up space Vacuum-resistant thru-beam type fiber Vacuum-resistant expansion lens Front sensing type so FT-H30-M1V-S embedding is possible FV-LE1 Vacuum-resistant side-view lens • Sensing range increased by 4 times or more FV-SV2 10 • FOR LCD SEMICONDUCTOR INDUSTRY FOR LCD • SEMICONDUCTOR INDUSTRY Guide to fibers and characteristics Light emitting amount selection function FX-301 FX-301-HS FX-305 When sensing transparent objects and minute objects, the light emitting amount can be changed without changing the response time, even for cases where the incident light intensity is fully saturated, which was not possible with conventional models. This allows stable sensing to be maintained, and there is no longer any need to change the sensing range or change the fiber sensor as used to be required. Example: Sensing glass substrate [Incident light intensity saturated] [Stable sensing] Actual digit difference: C A Upper display limit 4000 Light emitting Actual digit difference: C’ amount B , A changed Saturated digit difference: D , B Comparison of saturation remedies Previous models FX-301(-HS), FX-305 � Remedy � Problem ● Changing response time Mode selection Affects positioning precision Light emitting amount selection ● Changing fiber Change to thinner fiber to reduce light amount Cost and man-hour inefficiencies function makes steps such as those at left unnecessary. ● Changing setting position Increase sensing range Man-hour and space inefficiencies Fiber for glass substrate conveyor FD-L40 series, FR-WKZ11 Fibers are available which are ideal for glass substrate conveyor processes. FD-L43/L45 FD-L43/L45 Alignment / Convergent reflective type FD-L43, FD-L45 Even glass substrates with �8 � (FD-L45: �6 �) of flexure can be stably sensed. • High flexure of �8 � (FD-L43) • Long sensing range 30 mm 1.181 in (FD-L45) Sensing glass substrate through a view port FR-WKZ11 F FD-L44 D-L44 FD-L46 Mapping / Convergent reflective type FD-L46 Seating confirmation / Convergent Retroreflective type FR-WKZ11 Accurate mapping even for 0.5 mm reflective type FD-L44 A polarization filter allows accurate sensing 0.020 in thin glass substrates. of glass substrates that pass by the view port. Long sensing range 0 to 6 mm 0 to A light weight of approximately 39 g means it 0.236 in for seating confirmation. • Long sensing range 1.5 m 4.921 ft can even be installed at the ends of handlers. (when sensing glass substrates) 11 • FOR LCD SEMICONDUCTOR INDUSTRY FOR LCD • SEMICONDUCTOR INDUSTRY Guide to fibers and characteristics External data bank switching and teaching are possible External input unit FX-CH2 FX-301 FX-305 The FX-CH2 external input unit (optional) can be used to carry out teaching and data bank switching operations externally without needing to operate the digital fiber sensors directly. This is ideal for locations such as clean rooms where entry and exit of personnel are restricted. � Sensing glass substrate (stable sensing of minute differences) When sensing transparent objects and extremely small objects, variations in the incident light intensity caused by external factors such as slippage of the beam axis due to vibration can result in incorrect operation. In such cases, periodically setting limit teaching ‘�’ can be used to ensure more stable sensing. The FX-CH2 can be used to carry out teaching externally, so that teaching can be carried out much more easily in places where entry and exit of personnel are restricted. 1 2 Input wire Input wire Sensing object Sensing object Reflector Reflector (Glass substrate) (Glass substrate) 1 Carry out limit teaching ‘�’ before the sensing object (glass substrate) arrives (while there is no sensing object present). When the shift value is set to 5 % beforehand, the threshold value is set to a value that is at a level 5 % lower than the incident light intensity during teaching. 2 Even when sensing glass substrates with high degrees of transparency (low damping), stable sensing is possible without changes in the light amount due to external causes. Upstream communication for reading data and teaching are also possible Upstream communication unit SC-GU1-485 FX-301 FX-305 A PLC or computer can be used for sending inputs (teaching or data bank switching) to the digital fiber sensors, and also a communication unit can be used for confirming incident light intensities and output statuses for the digital fiber sensors, which is ideal for equipment such as semiconductor manufacturing equipment in places where entry and exit of personnel are restricted. High general compatibility so that any type of PLC can be used � Example of use in semiconductor cleaning process RS-485 communication provides a high level of general compatibility so that any type of PLC can Pipe-mountable be used. Integration with existing systems is liquid level detection fiber possible without the need to change PLCs. RS-485 communication Contact type liquid Chemical-resistant level detection fiber fiber Compatible with all PLCs equipped with RS-485 compatible units Communication speed 57.6 kbps High-speed communication at a maximum speed of 57.6 kbps allows the operator to instantly confirm information such as the incident light Menu Back The sensor settings and operation can be Device A monitor intensity and output statuses of the digital sensors. confirmed on the touch screen, greatly Line1 Line2 Line3 Line4 improving ease of operation! Series connection of a maximum of 31 nodes is possible Incident light intensity Output A maximum of 31 nodes can be connected in Liquid level detection sensor 1 series. This is ideal for flexible handling when the Tank A Liquid level detection sensor 2 sensors are to be installed in scattered locations or if more sensors are added. Passage confirmation sensor Loader A Mapping sensor Ideal for workplaces such as semiconductor Less wiring and installation work and LCD manufacturing lines where there are Up to a maximum of 16 sensors can be connected restrictions on operators entering and exiting side-by-side. Power can be supplied to all of them at once, so that less wiring and installation work is ● Sensor incident light intensity ● Sensor settings verification required. Wire-saving connectors also makes it possible ● Sensor output status ● Threshold value settings, etc. to send output signals to the PLC in a single batch. 12 • FOR LCD SEMICONDUCTOR INDUSTRY FOR ELECTRONIC COMPONENT • AUTOMATIC ASSEMBLY INDUSTRY Guide to fibers and characteristics High-speed response 35 ¨s Independent dual outputs FX-301-HS FX-305 These digital fiber sensors have the fast response time of 35 !s. Two independent output channels are provided, so that one sensor They are ideal for sensing minute objects that are moving at high can be used for control tasks that previously required two sensors. speeds. In addition, the second output channel can be used for alarm output and error output, so that ease of maintenance is improved. Output 1 and output 2 can be used together to Screw length discrimination Distinguishing between distinguish between sensing objects A, B and C. [ ] sensing objects A, B and C Sensing object A Sensing object B Sensing object C Ultra high-speed response 35¨s (600) (1,000) (3,000) Output 1 OFF ON Output 2 OFF ON Incident light intensity m A window comparator mode for distinguishing between sensing objects with single output is also available. Interference prevention up to maximum of sixteen units FX-305 Interference prevention can be set for up to a maximum of 16 units, so that they can be used with confidence in locations where the fibers are installed in contact with each other. In addition, interference prevention for two fibers can be set during 65 !s ultra high-speed mode. FD-FM2 Interference prevention switching function Mode IP-1 IP-2 Dog No. of units Response time No. of units Response time 2 units 65 !s 4 units 130 !s H-SP FAST 4 units 150 !s 8 units 300 !s STD 4 units 250 !s 8 units 500 !s STDF 4 units 700 !s 8 units 1.4 ms LONG 4 units 2.5 ms 8 units 5 ms U-LG 8 units 4.5 ms 16 units 9 ms For the FX-301/B/G/H, up to 4 units can be set. The FX-301-HS is not equipped with an interference prevention function. Improved ease of working! External data bank switching and teaching FX-301 FX-305 The FX-CH2 external input unit (optional) can be used to carry out teaching and data bank switching operations externally without needing to operate the digital fiber sensors directly. This is very convenient for equipment which requires frequent setup changes. 13 • FOR ELECTRONIC COMPONENT AUTOMATIC ASSEMBLY INDUSTRY FOR ELECTRONIC COMPONENT • AUTOMATIC ASSEMBLY INDUSTRY Guide to fibers and characteristics Wide beam fiber FT-WA30/A30, FT-WA8/A8 It has a wide sensing width of 11 mm 0.433 in for the FT-WA8/A8 and 32 mm 1.260 in for the FT-WA30/A30 enabling long distance sensing of objects as far as FT-WA30 FT-WA8 3,500 mm 137.795 in (with the FX-301 in long range mode). Optimal for detecting unsteady works or small objects. Detecting dropping screws Wire breakage detection Finest spot fiber FX-MR6�FD-EG3 An ultra-small "0.1 mm "0.004 in spot size has now been made possible by FX-MR6 (Lens) combining our precision fiber with our � finest spot lens. The orientation of 0603 chips can also be discriminated stably. FD-EG3 (Fiber) FD-G6X Finest spot lens FX-MR6 Fiber model No. Distance to focal point Spot diameter IC FD-EG3 7�0.5 mm 0.276�0.020 in "0.1 mm "0.004 in approx. FX-MR6 7�0.5 mm 0.276�0.020 in "0.15 mm "0.006 in approx. FD-EG2 FD-EG1 7�0.5 mm 0.276�0.020 in "0.2 mm "0.008 in approx. FD-WG4/G4/G6X/G6 7�0.5 mm 0.276�0.020 in "0.4 mm "0.016 in approx. Finest spot lens FX-MR3 Fiber model No. Distance to focal point Spot diameter FD-EG3 7.5�0.5 mm 0.295�0.020 in "0.15 mm "0.006 in approx. 7.5�0.5 mm 0.295�0.020 in "0.2 mm "0.008 in approx. FD-EG2 FD-EG1 7.5�0.5 mm 0.295�0.020 in "0.3 mm "0.012 in approx. 0603 chip orientation discrimination IC pin sensing FD-WG4/G4/G6X/G6 7.5�0.5 mm 0.295�0.020 in "0.5 mm "0.020 in approx. Ultra small diameter fiber FT-E12/E22, FD-E12/E22 Sleeve head diameter of 0.25 mm 0.010 in has been realized (FT-E12). This has improved the sensing capability for minute objects such as the 0603 chip. Chip FT-E22 FD-E12 Sensing of chip components during suction transport Confirming passage of chip components Rectangular head fiber FT-Z8�/WZ8� The allowable bending radius is 4 mm 0.157 in (1 mm 0.039 in for the FT-WZ8�). This allows the fibers to be routed with great freedom and uses less space. Because it is installed with only two M2 screws, light beam axis alignment is easy. A front sensing type, side FT-WZ8E sensing type and top sensing type are provided. FT-Z8 Detecting ICs in tranceparent stick Parts feeder surplus detection 14 • FOR ELECTRONIC COMPONENT AUTOMATIC ASSEMBLY INDUSTRY FOR PHARMACEUTICAL • PACKAGING INDUSTRY Guide to fibers and characteristics Retroreflective type fiber FR-WKZ11, FR-KZ21/22 The lineup includes retroreflective type fibers which are ideal for sensing transparent objects. With polarizing filters FR-WKZ11 This fiber has a compact head of W9.5�H5.2�D15 mm W0.374�H0.205�D0.591 in. Equipped with allowable bending radius: R1 mm R0.039 in making it space efficient. Side-view fiber Chemical-resistant fiber FT-V10 FT-Z802Y Because this is a side-view fiber, it is ideal for sensing in With the case made of PFA (fluorine resin) and fiber sheath locations where space is scarce. Has a 4-side beveled shape with PFA (fluorine resin), the fiber can be used with various and beam axis alignment with respect to the beveled surface is types of chemical liquids. done when installing the product, so that the fiber can be installed easily just by aligning its surface. Tough flexible fiber FT-P81X, FD-P81X, FD-G6X Stainless steel braiding protects the fiber cable and prevents fiber breakage due to snagging. R10 mm R0.394 in or more Strong stainless steel mesh protects fiber cables from breakage 15 • FOR PHARMACEUTICAL PACKAGING INDUSTRY FX-300 ORDER GUIDE Quick-connection cable is not supplied with the amplifier. Please order it separately. Connector type amplifiers Quick-connection cables Type Appearance Model No. Emitting element Output Type Model No. Length NPN open-collector FX-301 transistor CN-73-C1 1 m 3.281 ft Red LED PNP open-collector FX-301P transistor NPN open-collector FX-301B CN-73-C2 2 m 6.562 ft transistor Blue LED PNP open-collector FX-301BP transistor CN-73-C5 5 m 16.404 ft NPN open-collector FX-301G transistor Green LED PNP open-collector FX-301GP transistor CN-71-C1 1 m 3.281 ft NPN open-collector FX-301H transistor Infrared LED PNP open-collector CN-71-C2 2 m 6.562 ft FX-301HP transistor NPN open-collector FX-301-HS transistor Red LED CN-71-C5 5 m 16.404 ft PNP open-collector FX-301P-HS transistor 1 m 3.281 ft CN-74-C1 NPN open-collector 2 m 6.562 ft FX-305 CN-74-C2 transistor CN-74-C5 5 m 16.404 ft Red LED 1 m 3.281 ft CN-72-C1 PNP open-collector 2 m 6.562 ft FX-305P CN-72-C2 transistor 5 m 16.404 ft CN-72-C5 16 High-speed High-function type Standard type type Sub cable (2-core) Main cable (4-core) Sub cable (1-core) Main cable (3-core) FX-300 ORDER GUIDE Quick-connection cables Quick-connection cable is not supplied with the amplifier. Please order it separately. For FX-301(-HS)/B/G/H Main cable Type Model No. Description • CN-73-C� Length: 1 m 3.281 ft CN-73-C1 2 0.15 mm 3-core cabtyre cable, with connector on one end Main cable Length: 2 m 6.562 ft CN-73-C2 Cable outer diameter: "3.0 mm "0.118 in (3-core) CN-73-C5 Length: 5 m 16.404 ft Sub cable • CN-71-C� CN-71-C1 Length: 1 m 3.281 ft 2 Sub cable 0.15 mm 1-core cabtyre cable, with connector on one end CN-71-C2 Length: 2 m 6.562 ft (1-core) Cable outer diameter: "3.0 mm "0.118 in CN-71-C5 Length: 5 m 16.404 ft Quick-connection cable is not supplied with the amplifier. Please order it separately. For FX-305 Main cable Type Model No. Description • CN-74-C� Length: 1 m 3.281 ft CN-74-C1 2 0.15 mm 4-core cabtyre cable, with connector on one end Main cable Length: 2 m 6.562 ft CN-74-C2 Cable outer diameter: "3.0 mm "0.118 in (4-core) CN-74-C5 Length: 5 m 16.404 ft Sub cable • CN-72-C� CN-72-C1 Length: 1 m 3.281 ft 2 Sub cable 0.15 mm 2-core cabtyre cable, with connector on one end CN-72-C2 Length: 2 m 6.562 ft (2-core) Cable outer diameter: "3.0 mm "0.118 in CN-72-C5 Length: 5 m 16.404 ft End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade. End plates Appearance Model No. Description When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates ensure that all amplifiers are mounted MS-DIN-E together in a secure and fully connected manner. Two pcs. per set OPTIONS Amplifier mounting bracket Designation Model No. Description • MS-DIN-2 Amplifier mounting MS-DIN-2 Mounting bracket for amplifier bracket 10 sets of 2 communication window seals and 1 connector seal Communication window seal: It prevents malfunction due to transmission signal from another Fiber amplifier FX-MB1 amplifier, as well as, prevents effect on another amplifier. protective seal Connector seal: Fiber amplifier protective seal It prevents contact of any metal, etc., with the pins of the quick- • FX-MB1 connection cable. Communication window seal Connector seal 17 FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Thru-beam type (one pair set) � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending Type object length Model No. Sensing range (mm in)(Note 2) � : STDF � : S-D radius (mm in) � : STD (Note 3) : Free-cut 1,600 62.992 400 15.748 Lens mountable "0.04 mm M4 200 7.874 1,100 43.307 "0.0016 in FT-B8 700 27.559 180 7.087 opaque object 530 20.866 R25 mm R0.984 in Lens mountable M4 FT-FM2 1,000 39.370 280 11.024 Sleeve 90 mm 3.543 in "0.03 mm M4 Fiber 780 30.709 150 5.906 "0.0012 in R25 mm FT-FM2S 500 19.685 130 5.118 "1.48"0.058 opaque object R0.984 in 400 15.748 2 m Sleeve Sleeve 40 mm 1.575 in M4 6.562 ft R10 mm FT-FM2S4 R0.394 in "1.48"0.058 Lens mountable 750 29.528 200 7.874 "0.03 mm M4 90 3.543 570 22.441 R1 mm "0.0012 in FT-W8 350 13.780 100 3.937 R0.039 in opaque object 290 11.417 900 35.433 230 9.055 Lens mountable M4 "0.04 mm R4 mm 650 25.591 100 3.937 "0.0016 in R0.157 in FT-P80 400 15.748 110 4.331 opaque object 320 12.598 Flexible 900 35.433 230 9.055 Lens mountable "0.05 mm M4 650 25.591 100 3.937 1 m R10 mm "0.0020 in FT-P81X 380 14.961 110 4.331 R0.394 in 3.281 ft opaque object Tough flexible 320 12.598 550 21.654 140 5.512 M4 Lens mountable "0.04 mm R4 mm 400 15.748 70 2.756 "0.0016 in R0.157 in FT-P60 2 m 250 9.843 80 3.150 opaque object 190 7.480 6.562 ft Flexible M4 750 29.528 200 7.874 "0.06 mm 570 22.441 90 3.543 "0.0024 in FT-WR80 350 13.780 100 3.937 W7�H9�D13.9 opaque object W0.276�H0.354�D0.547 290 11.417 R1 mm 2 m R0.039 in With lens M4 1,500 59.055 420 16.535 "0.04 mm 6.562 ft 1,200 47.244 200 7.874 "0.0016 in FT-WR80L 750 29.528 210 8.268 W7�H9�D14.6 opaque object W0.276�H0.354�D0.575 600 23.622 740 29.134 150 5.906 Lens mountable "0.04 mm M4 530 20.866 75 2.953 R25 mm "0.0016 in FT-R80 2 m 320 12.598 80 3.150 R0.984 in opaque object 6.562 ft 230 9.055 Lens mountable 1,000 39.370 280 11.024 "0.03 mm (except FX-LE2) 780 30.709 150 5.906 M3 "0.0012 in FT-T80 500 19.685 130 5.118 opaque object 400 15.748 R25 mm R0.984 in M3 FT-NFM2 Sleeve 90 mm 3.543 in 400 15.748 100 3.937 "0.025 mm Fiber M3 55 2.165 270 10.630 "0.0010 in R25 mm FT-NFM2S 200 7.874 49 1.929 opaque object "0.88 "0.035 R0.984 in 140 5.512 2 m Sleeve Sleeve 40 mm 1.575 in 6.562 ft M3 R10 mm FT-NFM2S4 R0.394 in "0.88 "0.035 220 8.661 55 2.165 M3 160 6.299 25 0.984 R1 mm FT-W4 100 3.937 28 1.102 R0.039 in "0.02 mm 80 3.150 "0.0008 in 350 13.780 75 2.953 opaque object R4 mm M3 250 9.843 30 1.181 R0.157 in FT-P40 150 5.906 35 1.378 100 3.937 Flexible 19,500 767.715 10,000 393.700 With lens "0.4 mm M14 19,500 767.715 3,500 137.795 R25 mm "0.016 in FT-FM10L 10 m 19,500 767.715 3,800 149.606 R0.984 in opaque object 14,000 551.180 32.808 ft Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 3) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition. 18 Threaded type Long sensing M3 M4 Elbow Nut type range FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Thru-beam type (one pair set) � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2) � : STDF � : S-D radius (mm in) (Note 3) � : STD : Free-cut With lens � Long sensing range 1,500 59.055 420 16.535 "0.02 mm "3"0.118 1,200 47.244 200 7.874 "0.0008 in FT-WS8L 750 29.528 210 8.268 opaque object 600 23.622 R1 mm 2 m R0.039 in 780 30.709 200 7.874 "0.05 mm "3"0.118 6.562 ft 570 22.441 90 3.543 "0.0020 in FT-WS3 340 13.386 100 3.937 opaque object 290 11.417 With lens � Long sensing range 2,000 78.740 580 22.835 "0.02 mm "2.5"0.098 1,600 62.992 170 6.693 "0.0008 in FT-SFM2L 600 23.622 280 11.024 opaque object 800 31.496 R25 mm R0.984 in 1,000 39.370 280 11.024 "2.5"0.098 780 30.709 150 5.906 2 m FT-SFM2 500 19.685 130 5.118 "0.03 mm 6.562 ft 400 15.748 "0.0012 in 750 29.528 200 7.874 opaque object "2.5"0.098 570 22.441 90 3.543 R1 mm FT-WS8 350 13.780 100 3.937 R0.039 in 290 11.417 400 15.748 100 3.937 "0.025 mm "1.5"0.059 270 10.630 55 2.165 R25 mm "0.0010 in FT-SNFM2 200 7.874 49 1.929 R0.984 in opaque object 140 5.512 2 m 220 8.661 55 2.165 "1.5"0.059 6.562 ft 160 6.299 25 0.984 R1 mm FT-WS4 100 3.937 28 1.102 "0.02 mm R0.039 in 80 3.150 "0.0008 in 350 13.780 90 3.543 opaque object "1.5"0.059 1 m 280 11.024 40 1.575 FT-P2 160 6.299 42 1.654 3.281 ft R4 mm 120 4.724 R0.157 in 100 3.937 30 1.181 "0.02 mm "1"0.039 Flexible 80 3.150 13 0.512 500 mm "0.0008 in FT-PS1 50 1.969 17 0.669 19.685 in opaque object 40 1.575 20 0.787 8 0.315 Beam diameter "0.25 "3 "0.125 mm "0.005 in 18 0.709 3 0.118 500 mm "0.010"0.118 FT-E12 13 0.512 3 0.118 19.685 in "0.02 mm Sleeve part cannot be bent. 10 0.394 R5 mm "0.0008 in Beam diameter 130 5.118 36 1.417 R0.197 in "0.4 "3 opaque object "0.25 mm "0.010 in "0.016"0.118 80 3.150 18 0.709 1 m FT-E22 60 2.362 15 0.591 3.281 ft Sleeve part cannot be bent. 50 1.969 "4"0.157 2,350 92.520 800 31.496 "0.05 mm 2,000 78.740 340 13.386 "0.0020 in FT-V10 3 1,400 55.118 350 13.780 opaque object 0.118 1,000 39.370 2 m "1.5"0.059 550 21.654 140 5.512 6.562 ft 400 15.748 65 2.559 "2.5"0.098 0.8 0.031 FT-SFM2SV2 240 9.449 70 2.756 Sleeve part cannot be bent. 200 7.874 R25 mm "1"0.039 410 16.142 125 4.921 R0.984 in 390 15.354 60 2.362 1 m "2"0.079 0.6 0.024 FT-V22 220 8.661 63 2.480 3.281 ft "0.02 mm Sleeve part cannot be bent. 180 7.087 "0.0008 in 60 2.362 "1"0.039 220 8.661 opaque object 175 6.890 25 0.984 "2.5"0.098 0.6 0.024 FT-V41 100 3.937 27 1.063 Sleeve part cannot be bent. 80 3.150 2 m 120 4.724 30 1.181 "1"0.039 6.562 ft 90 3.543 13 0.512 R1 mm "2"0.079 FT-WV42 1 0.039 55 2.165 15 0.591 R0.039 in Sleeve part cannot be bent. 40 1.575 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 3) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition. 19 Cylindrical type "1 Side-view Ultra-small diameter "1.5 "0.059 "2.5 "0.098 "3 "0.118 "0.039 FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Thru-beam type (one pair set) � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object length Model No. Type Sensing range (mm in)(Note 2) � : STDF � : S-D radius (mm in) � : STD (Note 3) : Free-cut 3,500 137.795 850 33.465 Easy mounting � Top sensing "0.08 mm 2,500 98.425 400 15.748 R1 mm "0.0032 in FT-WZ8H 1,600 62.992 410 16.142 R0.039 in W3�H8�D12 opaque object 1,200 47.244 W0.118�H0.315�D0.472 3,100 122.047 1,000 39.370 "0.03 mm R4 mm 2,700 106.299 420 16.535 "0.0012 in R0.157 in FT-Z8H 1,550 61.024 490 19.291 opaque object 1,400 55.118 Flexible Easy mounting � Side sensing 2,100 82.677 500 19.685 "0.05 mm 1,500 59.055 200 7.874 R1 mm W3�H12�D8 "0.0020 in FT-WZ8E 950 37.402 210 8.268 R0.039 in W0.118�H0.472�D0.315 opaque object 700 27.559 2 m 1,850 72.835 600 23.622 "0.03 mm R4 mm 6.562 ft 1,600 62.992 250 9.843 "0.0012 in R0.157 in FT-Z8E 950 37.402 280 11.024 opaque object 800 31.496 Flexible Easy mounting � Front sensing 950 37.402 240 9.449 "0.04 mm 700 27.559 100 3.937 R1 mm "0.0016 in W8.5�H12�D3 FT-WZ8 420 16.535 120 4.724 R0.039 in W0.335�H0.472�D0.118 opaque object 330 12.992 1,100 43.307 300 11.811 "0.03 mm R4 mm 800 31.496 120 4.724 R0.157 in "0.0012 in FT-Z8 500 19.685 140 5.512 opaque object 400 15.748 Flexible Front sensing 300 11.811 70 2.756 "0.08 mm 200 7.874 40 1.575 "0.0032 in FT-WZ4 W10�H7�D2 140 5.512 40 1.575 opaque object W0.394�H0.276�D0.079 100 3.937 1 m Fiber bending type 220 8.661 50 1.969 "0.08 mm 3.281 ft W2�H10�D10 W0.079�H0.394�D0.394 150 5.906 30 1.181 "0.0032 in FT-WZ4HB 105 4.134 30 1.181 opaque object 75 2.953 R1 mm Front sensing R0.039 in 660 25.984 150 5.906 "0.08 mm 440 17.323 80 3.150 "0.0032 in FT-WZ7 W14�H7�D3.5 308 12.126 80 3.150 opaque object W0.551�H0.276�D0.138 220 8.661 2 m Fiber bending type 870 34.252 210 8.268 "0.03 mm W3.5�H14�D11 W0.138�H0.551�D0.433 6.562 ft 580 22.835 110 4.331 "0.0012 in FT-WZ7HB 406 15.984 110 4.331 opaque object 290 11.417 "3.5 3,000 118.110 800 31.496 "0.138 2,000 78.740 300 11.811 R25 mm FT-K8 1,500 59.055 350 13.780 "3.7 R0.984 in "0.146 1,000 39.370 Side-view type with small light 2,200 86.614 600 23.622 "0.06 mm dispersion 1,700 66.929 280 11.024 R1 mm "0.0024 in FT-WKV8 "4"0.157 1,000 39.370 300 11.811 R0.039 in opaque object 700 27.559 2 m 3 3,000 118.110 800 31.496 6.562 ft R25 mm 0.118 2,000 78.740 300 11.811 FT-KV8 1,500 59.055 350 13.780 R0.984 in 1,000 39.370 W2�H1.5�D20 W0.079�H0.059�D0.787 600 23.622 180 7.087 "0.02 mm 500 19.685 90 3.543 R10 mm "0.0008 in FT-KV1 2 0.079 300 11.811 100 3.937 R0.394 in opaque object 250 9.843 Wide area sensing R1 mm FT-WA30 ( (Note 4) Note 4) ( (Note 4) Note 4) 3,500 137.795 3,500 137.795 R0.039 in Sensing width "0.3 mm 32 mm 1.260 in ( (Note 4) Note 4) 3,500 137.795 3,000 118.110 "0.012 in ( (Note 4) Note 4) 3,500 137.795 ( (Note 4) Note 4) 3,500 137.795 W5�H69�D20 opaque object ( (Note 4) Note 4) 3,500 137.795 W0.197�H2.717�D0.787 R10 mm FT-A30 R0.394 in 2 m Wide area sensing 6.562 ft R1 mm FT-WA8 ( (Note 4) Note 4) 3,500 137.795 1,100 43.307 R0.039 in Sensing width "0.25 mm 11 mm 0.433in ( (Note 4) Note 4) 3,500 137.795 1,080 42.520 "0.010 in 3,500 137.795 750 29.528 opaque object W4.2�H31�D13.5 1,500 59.055 R10 mm FT-A8 W0.165�H1.220�D0.531 R0.394 in Top sensing 850 33.465 220 8.661 Horizontal: W5�H15�D15 W0.197�H0.591�D0.591 650 25.591 100 3.937 "0.025 mm FT-AFM2 380 14.961 115 4.528 "0.0010 in 330 12.992 opaque object R25 mm 2 m Side sensing 800 31.496 200 7.874 Vertical: R0.984 in 6.562 ft 590 23.228 90 3.543 "0.45 mm FT-AFM2E "0.018 in 350 13.780 100 3.937 W5�H15�D15 W0.197�H0.591�D0.591 opaque object 290 11.417 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 3) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition. 4) The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long. 20 Special Rectangular Array Wide beam Narrow beam Compact FX-300 LIST OF FIBERS The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Thru-beam type (one pair set) � : U-LG � : FAST Min. sensing Fiber cable Bending Shape of fiber head � : LONG � : H-SP object Type length Model No. Sensing range (mm in)(Note 2) � : STDF � : S-D radius (mm in) (Note 3) � : STD : Free-cut 350 �C 662 �F R25 mm Lens mountable M4 FT-H35-M2 750 29.528 200 7.874 R0.984 in "0.04 mm 2 m 550 21.654 85 3.346 "0.0016 in 330 12.992 90 3.543 6.562 ft Fiber 350 �C 662 �F R25 mm opaque object 280 11.024 Sleeve 60 mm 2.362 in M4 R0.984 in Sleeve FT-H35-M2S6 R10 mm "2.1"0.083 R0.394 in Allows flexible wiring 420 16.535 100 3.937 "0.02mm 200 �C 392 �F 310 12.205 40 1.575 1 m R10 mm "0.0008 in Lens mountable FT-H20W-M1 M4 180 7.087 50 1.969 3.281 ft R0.394 in opaque object 140 5.512 750 29.528 200 7.874 200 �C 392 �F "0.04 mm 550 21.654 85 3.346 1 m Lens mountable "0.0016 in M4 FT-H20-M1 320 12.598 90 3.543 3.281 ft opaque object 280 11.024 R25 mm 130 �C 266 �F 1,200 47.244 300 11.811 R0.984 in "0.06 mm Lens mountable (FX-LE2 only) 880 34.646 150 5.906 "0.0024 in FT-H13-FM2 2 m M4 550 21.654 155 6.102 opaque object 6.562 ft 440 17.323 Lens mountable (FX-LE1) FT-H20-J20-S 200 mm 7.874 in (Note 6) (Note 4) 530 20.866 140 5.512 "0.12 mm M4 390 15.354 60 2.362 "0.005 in FT-H20-J30-S 300 mm 11.811 in 225 8.858 60 2.362 opaque object Heat- (Note 6) (Note 4) 200 7.874 resistant fiber FT-H20-J50-S 500 mm 19.685 in R18 mm (Note 6) (Note 4) R0.709 in Side-view (Note 5) 500 mm 19.685 in FT-H20-VJ50-S 840 33.071 200 7.874 "0.16 mm (Note 4) (Note 6) "3.8 550 21.654 90 3.543 "0.006 in "0.150 370 14.567 90 3.543 opaque object "4 280 11.024 800 mm 31.496 in FT-H20-VJ80-S "0.157 (Note 4) (Note 6) Easy mounting � Rectangular head SEMI S2 compliant W7�H15�D13 3,500 137.795 1,000 39.370 "4 mm W0.276�H0.591�D0.512 R25 mm 3,500 137.795 500 19.685 "0.157 in 2 m FT-Z802Y 3,000 118.110 530 20.866 R0.984 in opaque object 6.562 ft 1,500 59.055 3,500 137.795 1,000 39.370 "5.5"0.217 3,500 137.795 500 19.685 FT-L80Y 2,000 78.740 530 20.866 "0.2 mm R30 mm 1,500 59.055 2 m "0.008 in R1.181 in "5.5"0.217 1,000 39.370 280 11.024 Side-view 6.562 ft opaque object 800 31.496 120 4.724 (Note 7) FT-V80Y 500 19.685 140 5.512 400 15.748 300 �C 572 �F Lens mountable (FV-LE1/SV2 only) 350 13.780 90 3.543 "0.03 mm M4 1 m R18 mm FT-H30-M1V-S 250 9.843 50 1.969 "0.0012 in 150 5.906 40 1.575 3.281 ft R0.709 in (Note 8) opaque object 125 4.921 Notes: 1) Please contact our office for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 3) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition. 4) This is the fiber length (fixed length) for heat-resistant fibers. The ordinary-temperature fibers are free-cut to 2 m 6.562 ft. 5) The ordinary-temperature fiber is R25 mm R0.984 in or more. 6) Heat-resistant joint fibers and ordinary-temperature fibers (FT-FM2) are sold as a set. Please refer to ‘Heat-resistant joint fibers catalog’ for details. 7) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted. 8) Sold as a set comprising vacuum type fiber�photo-terminal (FV-BR1)�fiber at atmospheric side (FT-J8). Please refer to ‘Vacuum resistant fiber catalog’ for details. Model No. when ordering heat-resistant joint fibers individually as replacement parts • FT-H20-J20 (one pair set) • FT-H20-J30 (one pair set) • FT-H20-J50 (one pair set) • FT-H20-VJ50 (one pair set) • FT-H20-VJ80 (one pair set) Model No. when ordering vacuum-resistant fibers individually as replacement parts • Vacuum-resistant fiber • Photo-terminal • Fiber at atmospheric side FT-J8 (one pair set) FT-H30-M1V (one pair set) FV-BR1 (one pair set) 21 Special � Vacuum-resistant Chemical-resistant Heat-resistant Joint Heat-resistant FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Retroreflective type � : U-LG � : FAST Min. sensing Fiber cable Bending Shape of fiber head � : LONG � : H-SP object Model No. Type length Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut 100 to 910 3.937 to 35.827 100 to 460 3.937 to 18.110 W9.5�H5.2�D15 W0.374�H0.205�D0.591 "0.3 mm 100 to 730 3.937 to 28.740 Cannot use R1 mm "0.012 in FR-WKZ11 2 m 100 to 600 3.937 to 23.622 Cannot use R0.039 in opaque object 6.562 ft W30�H30�D0.5 W1.181�H1.181�D0.020 100 to 520 3.937 to 20.472 W9.5�H5.2�D21 W0.374�H0.205�D0.827 Horizontal: "5.5 mm FR-KZ21 "0.217 in 200 7.874 200 7.874 opaque object W10.6�H28�D10.1 W0.417�H1.102�D0.398 200 7.874 200 7.874 R10 mm 2 m 200 7.874 200 7.874 R0.394 in Vertical: W9.5�H25 6.562 ft 200 7.874 �D5.2 "0.06 mm FR-KZ21E W0.374�H0.984 W10.6�H28�D10.1 "0.0024 in �D0.205 W0.417�H1.102�D0.398 opaque object W7.5�H2.2�D11.2 W0.295�H0.087�D0.441 15 to 370 0.591 to 14.567 15 to 170 0.591 to 6.693 "0.12 mm 15 to 330 0.591 to 12.992 15 to 80 0.591 to 3.150 R10 mm "0.005 in 2 m FR-KV1 15 to 240 0.591 to 9.449 15 to 90 0.591 to 3.543 R0.394 in opaque object 6.562 ft 15 to 210 0.591 to 8.268 W4�H2�D21.5 W0.157�H0.079�D0.846 Notes: 1) Please contact our office for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. The sensing range of FR-WKZ11 is specified for the RF-13. The sensing range of FR-KZ21, FR-KZ21E and FR-KV1 is specified for the attached reflector. 3) The sensing range of FR-WKZ11 is the possible setting range for the reflector or reflective tape. The fiber can detect an object less than 100 mm 3.937 in away. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head. If this occurs, adjust the threshold value of the amplifier unit before use. The sensing range of FR-KZ21(E) is the possible setting range for the reflector. However, if setting the fiber to detect objects passing within 0 to 20 mm 0 to 0.787 in from the fiber head, unstable detection may result. The sensing range of FR-KV1 is the possible setting range for the reflector. The fiber can detect an object less than 15 mm 0.591 in away. 4) The minimum sensing object size is the value for red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Reflective type � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut 600 23.622 160 6.299 M6 480 18.898 85 3.346 FD-B8 280 11.024 75 2.953 R25 mm 220 8.661 R0.984 in 410 16.142 100 3.937 Coaxial M6 310 12.205 55 2.165 FD-FM2 200 7.874 47 1.850 140 5.512 Sleeve 90 mm 3.543 in Fiber M6 FD-FM2S R25 mm 370 14.567 85 3.346 "2.5 "0.098 R0.984 in 270 10.630 45 1.772 2 m Sleeve 40 mm 1.575 in 170 6.693 39 1.535 Sleeve "0.02 mm 6.562 ft 110 4.331 M6 R10 mm "0.0008 in FD-FM2S4 R0.394 in gold wire "2.5 "0.098 250 9.843 60 2.362 M6 190 7.480 25 0.984 R1 mm FD-W8 110 4.331 32 1.260 R0.039 in 90 3.543 300 11.811 70 2.756 R4 mm 220 8.661 30 1.181 R0.157 in FD-P80 130 5.118 35 1.378 M6 Flexible 100 3.937 270 10.630 60 2.362 M6 1 m 185 7.283 30 1.181 R10 mm FD-P81X 100 3.937 35 1.378 3.281 ft R0.394 in Tough flexible 80 3.150 240 9.449 60 2.362 "0.02 mm M6 185 7.283 25 0.984 R25 mm "0.0008 in FD-R80 2 m 110 4.331 30 1.181 R0.984 in gold wire 6.562 ft 85 3.346 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) The sensing range is specified for white non-glossy paper [400�400 mm 15.748�15.748 in] as the object. 3) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 4) The minimum sensing object size is the value for red LED type at maximum sensitivity. Note that the corresponding setting distance is different from the rated sensing distance. 22 Threaded type Narrow beam Sharp bending Wafer mapping With polarizing Side sensing Top sensing M6 Elbow filters FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Reflective type � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut 370 14.567 85 3.346 M4 270 10.630 45 1.772 FD-T80 170 6.693 39 1.535 110 4.331 R25 mm R0.984 in M4 FD-NFM2 140 5.512 35 1.378 Sleeve 90 mm 3.543 in Fiber M4 90 3.543 16 0.630 FD-NFM2S R25 mm 60 2.362 16 0.630 "1.48 "0.058 45 1.772 R0.984 in Sleeve Sleeve 40 mm 1.575 in M4 R10 mm FD-NFM2S4 R0.394 in "1.48 "0.058 Sleeve 40 mm 1.575 in Fiber R1 mm 40 1.575 12 0.472 "0.02 mm R0.039 in M4 30 1.181 4.5 0.177 "0.0008 in 2 m FD-W44 18 0.709 5 0.197 Sleeve gold wire 6.562 ft 15 0.591 "1.48 "0.058 R10 mm R0.394 in 250 9.843 60 2.362 M4 190 7.480 25 0.984 R1 mm FD-WT8 110 4.331 32 1.260 R0.039 in 90 3.543 Coaxial � Lens mountable 85 3.346 25 0.984 65 2.559 10 0.394 R2 mm FD-WG4 37 1.457 11 0.433 R0.079 in 32 1.260 150 5.906 42 1.654 M4 110 4.331 15 0.591 R25 mm FD-G4 65 2.559 19 0.748 R0.984 in 55 2.165 130 5.118 30 1.181 R4 mm 90 3.543 13 0.512 R0.157 in FD-P60 55 2.165 16 0.630 Flexible M4 45 1.772 140 5.512 35 1.378 Small diameter R25 mm 90 3.543 16 0.630 FD-T40 16 0.630 60 2.362 R0.984 in M3 45 1.772 40 1.575 12 0.472 M3 30 1.181 4.5 0.177 R1 mm FD-WT4 18 0.709 5 0.197 R0.039 in 15 0.591 2 m 50 1.969 14 0.551 R4 mm 6.562 ft M3 36 1.417 5.5 0.217 R0.157 in FD-P40 20 0.787 6 0.236 "0.02 mm 18 0.709 Flexible "0.0008 in Lens mountable (FX-MR3, FX-MR6) 150 5.906 42 1.654 gold wire 110 4.331 15 0.591 R25 mm M3 FD-G6 65 2.559 19 0.748 R0.984 in Coaxial 55 2.165 Lens mountable (FX-MR3, FX-MR6) 150 5.906 35 1.378 M3 90 3.543 12 0.472 R10 mm 1 m FD-G6X 48 1.890 20 0.787 3.281 ft R0.394 in Coaxial Tough flexible 45 1.772 (Note 5) 50 1.969 14 0.551 Coaxial � Lens mountable (FX-MR3, FX-MR6) 38 1.496 5 0.197 R25 mm M3 FD-EG1 25 0.984 6 0.236 R0.984 in High precision 18 0.709 40 1.575 9 0.354 Coaxial � Lens mountable (FX-MR3, FX-MR6) M3 25 0.984 3 0.118 Light emitting FD-EG2 fiber element 14 0.551 5 0.197 "0.04 mm "0.175"0.007 High precision 12 0.472 500 mm R10 mm "0.0016 in R0.394 in 20 0.787 5 0.197 19.685 in Coaxial � Lens mountable (FX-MR3, FX-MR6) gold wire M3 15 0.591 2.5 0.098 Light emitting FD-EG3 fiber element 9 0.354 3 0.118 "0.125"0.005 High precision 8 0.315 6.5 0.256 2 0.079 M3 "0.5 "0.020 5 0.197 Cannot use FD-EN500S1 3 0.118 Cannot use "0.02 mm Sleeve part cannot be bent. 3 0.118 R25 mm "0.0008 in Coaxial 50 1.969 14 0.551 R0.984 in M3 "0.8 "0.031 gold wire 1 m 38 1.496 5 0.197 FD-ENM1S1 20 0.787 6 0.236 3.281 ft Sleeve part cannot be bent. 18 0.709 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) The sensing range is specified for white non-glossy paper [200�200 mm 7.874�7.874 in (FD-T80, FD-WT8: 400�400 mm 15.748�15.748 in, FD-W44, FD-WT4, FD-P40, FD-G6, FD-EG1, FD-EG2, FD-EG3, FD-EN500S1, FD-ENM1S1: 100�100 mm 3.937�3.937 in)] as the object. 3) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 4) The minimum sensing object size is the value for red LED type at maximum sensitivity. Note that the corresponding setting distance is different from the rated sensing distance. 5) The allowable cutting range is 700 mm 27.559 in from the end that the amplifier inserted. 23 Threaded type M3 M4 FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Reflective type � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut 370 14.567 85 3.346 "3 "0.118 270 10.630 45 1.772 R25 mm FD-S80 170 6.693 39 1.535 R0.984 in 110 4.331 250 9.843 60 2.362 "3 "0.118 190 7.480 25 0.984 R1 mm FD-WS8 110 4.331 32 1.260 R0.039 in "0.02 mm 90 3.543 "0.0008 in 2 m 85 3.346 25 0.984 Coaxial gold wire 6.562 ft 65 2.559 10 0.394 R2 mm FD-WSG4 37 1.457 11 0.433 R0.079 in "3 "0.118 32 1.260 130 5.118 30 1.181 R4 mm 90 3.543 13 0.512 R0.157 in FD-P50 55 2.165 16 0.630 "3 "0.118 45 1.772 Flexible 140 5.512 35 1.378 "2.5 "0.02 mm R25 mm "0.098 90 3.543 16 0.630 "0.0008 in FD-SNFM2 2 m 60 2.362 16 0.630 R0.984 in gold wire 45 1.772 6.562 ft 80 3.150 19 0.748 "0.02 mm R4 mm 1 m 50 1.969 7.5 0.295 "0.0008 in R0.157 in FD-P2 30 1.181 9 0.354 3.281 ft "1.5 "0.059 gold wire 25 0.984 Flexible "1.5 "0.5 15 0.591 4 0.157 "0.02 mm "0.059"0.020 11 0.433 2 0.079 R10 mm "0.0008 in FD-E12 8 0.315 1 0.039 R0.394 in gold wire 6 0.236 Sleeve part cannot be bent. 1 m Coaxial 65 2.559 17 0.669 3.281 ft "0.02 mm "3 "0.118 R25 mm 45 1.772 8 0.315 "0.0008 in FD-E22 28 1.102 7 0.276 R0.984 in "0.65 "0.026 gold wire Sleeve part cannot be bent. 23 0.906 Small diameter 80 3.150 17 0.669 "1.5 "0.059 55 2.165 8 0.315 R25 mm 0.7 0.028 FD-V41 "3 "0.118 30 1.181 9 0.354 R0.984 in Sleeve part cannot be bent. 25 0.984 "3 "2 20 0.787 5 0.197 "0.02 mm "0.118 "0.079 15 0.591 Cannot use R1 mm "0.0008 in FD-WV42 2 m 1 0.039 8.5 0.335 Cannot use R0.039 in gold wire 6.562 ft Sleeve part cannot be bent. 7 0.276 "5 "2 170 6.693 32 1.260 "0.197 "0.079 R25 mm 100 3.937 15 0.591 FD-SFM2SV2 0.8 0.031 55 2.165 16 0.630 R0.984 in Sleeve part cannot be bent. 45 1.772 Glass substrate detection � Mapping 12 to 50 0.472 to 1.969 16 to 29 0.630 to 1.142 "0.3 mm 12.5 to 37.5 0.492 to 1.476 Cannot use R25 mm "0.012 in 4 m FD-L46 15 to 36 0.591 to 1.417 Cannot use R0.984 in gold wire 13.123 ft 15 to 35 0.591 to 1.378 W25�H7.3�D30 W0.984�H0.287�D1.181 Glass substrate detection � Alignment 0 to 50 0 to 1.969 0 to 30 0 to 1.181 0 to 36 0 to 1.417 0 to 15 0 to 0.591 W20�H29�D3.8 FD-L45 3 m 0 to 33 0 to 1.299 0 to 21 0 to 0.827 W0.787�H1.142�D0.150 9.843 ft 0 to 30 0 to 1.181 R4 mm (LCD glass) Glass substrate detection � Alignment R0.157 in W17�H29�D3.8 FD-L43 2 m W0669�H1.142�D0.150 0 to 23 0 to 0.906 6.562 ft Glass substrate detection � 0 to 8.2 0 to 0.323 0 to 5.7 0 to 0.224 Seating 0 to 7 0 to 0.276 0 to 5 0 to 0.197 FD-L44 0 to 5.2 0 to 0.205 0 to 6.5 0 to 0.256 "0.03 mm 0 to 6 0 to 0.236 R10 mm "0.0012 in 2 m R0.394 in 0 to 4.7 0 to 0.185 0 to 3.8 0 to 0.150 gold wire 6.562 ft 0 to 4.5 0 to 0.177 0 to 3 0 to 0.118 W12�H19�D3 FD-L44S 0 to 4 0 to 0.157 0 to 3.5 0 to 0.138 W0.472�H0.748�D0.118 0 to 4 0 to 0.157 Glass substrate detection 6.5 to 14.5 0.256 to 0.571 (Convergent point 8 0.315) 7.5 to 12 0.295 to0.472 (Convergent point 8 0.315) "1.9 mm 6.5 to 14 0.256 to 0.551 (Convergent point 8 0.315) Cannot use R1 mm "0.075 in FD-WL41 7 to 14 0.276 to 0.551 (Convergent point 8 0.315) Cannot use R0.039 in metal pipe (gray) 7 to 12 0.276 to 0.472 (Convergent point 8 0.315) 2 to 19 0.079 to 0.748 (Convergent point 8 0.315) 3.5 to 15 0.138 to 0.591(Convergent point 8 0.315) "0.06 mm 2.5 to 18 0.098 to 0.709 (Convergent point 8 0.315) Cannot use "0.024 in FD-L41 2 m W24�H21�D4 3 to 16 0.118 to 0.630 (Convergent point 8 0.315) Cannot use gold wire 6.562 ft W0.945�H0.827�D0.157 3 to 16 0.118 to 0.630 (Convergent point 8 0.315) R10 mm 2 to 20 0.079 to 0.787 (Convergent point 6 0.236) 4.5 to 11 0.177 to 0.433 (Convergent point 6 0.236) R0.394 in "0.02 mm W6�H18�D14 2.5 to 18 0.098 to 0.709 (Convergent point 6 0.236) 5 to 8.5 0.197 to 0.335 (Convergent point 6 0.236) "0.0008 in FD-L4 W0.236�H0.709�D0.551 4 to 12 0.157 to 0.472 (Convergent point 6 0.236) 4.8 to 9.5 0.189 to 0.374 (Convergent point 6 0.236) gold wire 4 to 12 0.157 to 0.472 (Convergent point 6 0.236) 0.5 to 8.5 0.020 to 0.335 1 to 5 0.039 to 0.197 "0.3 mm Cannot use R1 mm 0.5 to 7.5 0.020 to 0.295 "0.012 in 1 m FD-WL48 W7.2�H7.5�D2 1 to 6.5 0.039 to 0.256 Cannot use R0.039 in copper wire W0.283�H0.295�D0.079 3.281 ft 1 to 5.5 0.039 to 0.217 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) The sensing range is specified for white non-glossy paper (FD-S80, FD-WS8: 400�400 mm 15.748�15.748 in, FD-WSG4, FD-P50, FD-SNFM2, FD-V41, FD-SFM2SV2: 200�200 mm 7.874�7.874 in, FD-P2, FD-E12, FD-E22, FD-WV42, FD-L4, FD-WL48: 100�100 mm 3.937�3.937 in, FD-L46: 100�100�t 0.7 mm 3.937�3.937�t 0.028 in R edge of LCD glass substrates, FD-L43, FD-L44 and FD-L45: 100�100�t 0.7 mm 3.937�3.937� t 0.028 in LCD glass substrates, FD-L44S: silicon wafers polished surface, FD-WL41, FD-L41: 100�100�t 2 mm 3.937�3.937�t 0.079 in glass substrates). 3) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 4) The minimum sensing object size is the value for red LED type at maximum sensitivity. Note that the corresponding setting distance is different from the rated sensing distance. However, with the covergent reflective type, when the sensitivity is at MAX., it is only possible to detect the minimum size of the sensing object at a distance corresponding to the convergent point. 24 Rectangular Cylindrical type "1.5 "2.5 Convergent reflective type Side-view Ultra-small diameter "3 "0.118 "0.059 "0.098 FX-300 LIST OF FIBERS Pliable fibers (flexible and sharp bending fibers) are marked with light blue in the table. The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Reflective type � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut Front sensing 1 to 50 0.039 to 1.969 3 to 10 0.118 to 0.394 1.5 to 34 0.059 to 1.339 Cannot use FD-WZ4 W10�H7�D2 2 to 24 0.079 to 0.945 Cannot use "0.16 mm W0.394�H0.276�D0.079 3 to 17 0.098 to 0.906 "0.006 in 1 m Fiber bending type 1 to 70 0.039 to 2.756 2.5 to 15 0.098 to 0.591 copper wire 3.281 ft 1 to 46 0.039 to 1.811 3 to 7 0.118 to 0.276 FD-WZ4HB W2�H10�D10 1 to 32.2 0.039 to 1.268 3 to 7 0.118 to 0.276 W0.079�H0.394�D0.394 2.5 to 23 0.098 to 0.906 R1 mm Front sensing R0.039 in 200 7.874 1.5 to 35 0.059 to 1.378 120 4.724 2.5 to 18 0.098 to 0.709 FD-WZ7 W14�H7�D3.5 1 to 84 0.039 to 3.307 2.5 to 18 0.098 to 0.709 "0.03 mm W0.551�H0.276�D0.138 1 to 60 0.039 to 2.362 "0.0012 in 2 m Fiber bending type 0.5 to 270 0.002 to 10.630 1 to 70 0.039 to 2.756 gold wire 1 to 35 0.039 to 1.378 6.562 ft 0.5 to 180 0.002 to 7.087 FD-WZ7HB W3.5�H14�D11 1 to 126 0.039 to 4.961 1 to 35 0.039 to 1.378 W0.138�H0.551�D0.433 1 to 90 0.039 to 3.543 20 to 660 0.787 to 25.984 20 to 170 0.787 to 6.693 Long sensing range � Rectangular head "0.3 mm 20 to 480 0.787 to 18.898 25 to 90 0.984 to 3.543 R1 mm "0.012 in 2 m FD-WKZ1 W5.2�H9.5�D15 20 to 300 0.787 to 11.811 25 to 100 0.984 to 3.937 R0.039 in copper wire W0.205�H0.374�D0.591 6.562 ft 20 to 230 0.787 to 9.055 230 9.055 100 3.937 "0.02 mm 200 7.874 45 1.772 R25 mm "0.0008 in FD-A15 2 m 150 5.906 50 1.969 R0.984 in gold wire W7�H15�D30 W0.276�H0.591�D1.181 6.562 ft 150 5.906 Top sensing FD-AFM2 W5�H20�D20 290 11.417 78 3.071 W0.197�H0.787�D0.787 "0.02 mm R25 mm 220 8.661 35 1.378 2 m Side sensing 135 5.315 39 1.535 "0.0008 in R0.984 in 6.562 ft 110 4.331 gold wire FD-AFM2E W5�H20�D20 W0.197�H0.787�D0.787 Protective tube Contact type R40 mm "6"0.236 R1.575 in 2 m Fiber FD-F8Y 6.562 ft R15 mm (Note 5) R0.591 in Mountable on pipe � Applicable pipe diameter: Standard Outer dia. "6 to "26 mm "0.236 to "1.024 in transparent pipe FD-F41 W25�H13�D20 (Liquid) W0.984�H0.512�D0.787 [PVC (vinyl chloride), fluorine resin, polycarbonate, acrylic, glass, wall thickness 1 to 3 mm 0.039 to 0.118 in] R10 mm 2 m Mountable on pipe � For PFA, wall R0.394 in Applicable pipe diameter: 6.562 ft thickness 1 mm 0.039 in pipe Outer dia. "6 to "26 mm "0.236 to "1.024 in transparent pipe FD-F4 W25�H13�D20 [PFA (fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in] W0.984�H0.512�D0.787 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) The sensing range is specified for white non-glossy paper [200�200 mm 7.874�7.874 in (FD-WKZ1, FD-AFM2, FD-AFM2E: 400�400 mm 15.478�15.478 in)] as the object. 3) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 4) The minimum sensing object size is the value for red LED type at maximum sensitivity. Note that the corresponding setting distance is different from the rated sensing distance. 5) The allowable cutting range is 1,000 mm 39.370 in from the end that the amplifier inserted. 25 Special Rectangular Long sensing Liquid level sensing Array Wide beam Small range FX-300 LIST OF FIBERS The FX-305 and FX-301(-HS) have different sensing modes. FX-305 / FX-301 (Red LED type) sensing range (Note 1) FX-305: H-SP, FAST, STD, STDF, LONG, U-LG (no S-D mode) FX-301(-HS): S-D, H-SP, FAST, STD, LONG (no STDF or U-LG mode) Reflective type � : U-LG � : FAST Min. sensing Fiber cable Shape of fiber head � : LONG � : H-SP Bending object Type length Model No. Sensing range (mm in)(Note 2, 3) � : STDF � : S-D radius (mm in) (Note 4) � : STD : Free-cut 350 �C 662 �F � Coaxial M6 R25 mm FD-H35-M2 R0.984 in 2 m Fiber 350 �C 662 �F � Sleeve 60 mm 2.362 in 6.562 ft 300 11.811 100 3.937 R25 mm R0.984 in 270 10.630 35 1.378 "2.8 Sleeve FD-H35-M2S6 M6 "0.110 150 5.906 47 1.850 R10 mm R0.394 in 140 5.512 200 �C 392 �F � Coaxial R25 mm M6 FD-H20-M1 R0.984 in Fiber 190 7.480 57 2.244 350 �C 662 �F � Sleeve 90 mm 3.543 in R25 mm 1 m 160 6.299 R0.984 in 20 0.787 Sleeve FD-H35-20S 80 3.150 26 1.024 3.281 ft R10 mm "2.1 "0.02 mm M4 80 3.150 R0.394 in "0.083 "0.0008 in 300 11.811 100 3.937 200 �C 392 �F � Coaxial gold wire 270 10.630 35 1.378 FD-H20-21 150 5.906 47 1.850 M4 140 5.512 300 �C 572 �F � Glass substrate detection 0 to 20 0 to 0.787 1 to 8 0.039 to 0.315 Convergent reflective type 2 m 0 to 15 0 to 0.591 Cannot use W19�H27�D5 FD-H30-L32 0 to 10 0 to 0.394 2 to 6 0.079 to 0.236 6.562 ft W0.748�H1.063 �D0.197 0 to 10 0 to 0.394 R25 mm 180 �C 356 �F � Glass substrate detection 0 to 20 0 to 0.787 1 to 8 0.039 to 0.315 R0.984 in Convergent reflective type 0 to 15 0 to 0.591 Cannot use W19�H27�D5 FD-H18-L31 0 to 10 0 to 0.394 2 to 6 0.079 to 0.236 W0.748�H1.063 0 to 10 0 to 0.394 �D0.197 2 m 410 16.142 100 3.937 130 �C 266 �F 6.562 ft M6 310 12.205 55 2.165 FD-H13-FM2 200 7.874 47 1.850 140 5.512 300 �C 572 �F � Recfangular head 20 to 300 0.787 to 11.811 30 to 100 1.181 to 3.937 W9.5�H5.2�D15 W0.374�H0.205�D0.591 20 to 200 0.787 to 7.874 Cannot use 1 m FD-H30-KZ1V-S 20 to 150 0.787 to 5.906 Cannot use 3.281 ft (Note 5) "0.8 mm 25 to 130 0.984 to 5.118 R18 mm "0.031 in 300 �C 572 �F � Glass substrate detection 0 to 11 0 to 0.433 2 to 4 0.079 to 0.157 R0.709 in Convergent reflective type gold wire 0 to 8 0 to 0.315 Cannot use 3 m FD-H30-L32V-S W19�H5�D27 1.5 to 6 0.059 to 0.236 Cannot use W0.748�H0.197 9.843 ft (Note 5) �D1.063 1.5 to 5 0.059 to 0.197 Notes: 1) Refer to p.27 for the sensing ranges for the FX-301-HS in H-SP mode and for the FX-301B/G/H. 2) The sensing range is specified for white non-glossy paper [400�400 mm 15.748�15.748 in (FD-H30-L32, FD-H18-L31: 50�50 mm 1.969�1.969 in glass substrate, FD-H30-KZ1V-S, FD-H30-L32V-S: 100�100�t 0.7 mm 3.937�3.937�t 0.028 in transparent glass)] as the object. 3) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. 4) The minimum sensing object size is the value for red LED type at maximum sensitivity. Note that the corresponding setting distance is different from the rated sensing distance. 5) Sold as a set comprising vacuum type fiber�photo-terminal (FV-BR1)�fiber at atmospheric side (FT-J8). Please refer to ‘Vacuum resistant fiber catalog’ for details. Model No. when ordering vacuum-resistant fibers individually as replacement parts Vacuum-resistant fiber Mounting bracket for FD-H30-KZ1V Photo-terminal Fiber at atmospheric side � � � � FD-H30-KZ1V MS-FD-2 FV-BR1 (one pair set) FT-J8 (one pair set) FD-H30-L32V Accessories (attached with fibers) RF-003 (FR-KZ21/KZ21E exclusive mirror) • RF-003 • RF-13 • FX-CT1 • FX-CT2 RF-13 (Reflective tape) FX-CT1 (Fiber cutter) FX-CT2 (Fiber cutter) FX-AT2 (Attachment for fixed-length fiber, Orange) FX-AT3 (Attachment for "2.2 mm "0.087 in fiber, Clear orange) FX-AT4 (Attachment for "1 mm "0.039 in fiber, Black) FX-AT5 (Attachment for "1.3 mm "0.051 in fiber, Gray) FX-AT6 (Attachment for "1 mm "0.039 in / "1.3 mm "0.051 in mixed fiber, Black / Gray) • FX-AT2 • FX-AT3 • FX-AT4 If connecting to a fiber amplifier other than the FX-300 series Applicable fiber amplifiers: FX2 / FX3 series FX-AT10 (Attachment for "1 mm "0.039 in fiber) FX-AT13 (Attachment for "1.3 mm "0.051 in fiber) • FX-AT10 • FX-AT5 • FX-AT6 FX-AT15 (Attachment for "1 mm "0.039 in / "1.3 mm "0.051 in mixed fiber) • FX-AT13 • FX-AT15 26 Special Vacuum-resistant Heat-resistant FX-300 ▪ LIST OF SENSING RANGE FOR FX-301(P)-HS FX-301B/G/H Sensing range for ultra high-speed type FX-301(P)-HS in H-SP mode (35 ¨s)(Typical model) Sensing range Sensing range Fiber model No. Fiber model No. (mm in) (Note) (mm in) (Note) 160 6.299 60 2.362 FT-B8 FD-B8 120 4.724 35 1.378 FT-FM2 FD-FM2 FT-NFM2 40 1.575 FD-NFM2 14 0.551 FT-E12 2 0.079 FD-E12 1 0.039 10 0.394 5 0.197 FT-E22 FD-E22 Note: The sensing ranges are in H-SP mode. The sensing ranges in FAST, STD, S-D and LONG modes are the same as for the FX-301. (Refer to p.18l) Sensing range for FX-301B/G/H (Typical model) (mm in) Thru-beam type FT-B8 FT-FM2 FT-NFM2 FT-V10 FT-W8 FT-Z8 FT-P80 FT-A30 FT-A8 FT-E12 FT-E22 LONG 220 8.661 150 5.906 50 1.969 400 15.748 90 3.543 120 4.724 130 5.118 2,400 94.488 600 23.622 3 0.118 14 0.551 110 4.331 75 2.953 25 0.984 200 7.874 45 1.772 60 2.362 65 2.559 1,200 47.244 300 11.811 2 0.079 7 0.276 FX-301B STD FAST 75 2.953 40 1.575 16 0.630 130 5.118 30 1.181 40 1.575 45 1.772 700 27.559 220 8.661 1 0.039 4 0.157 LONG 110 4.331 70 2.756 24 0.945 200 7.874 56 2.205 60 2.362 70 2.756 1,200 47.244 300 11.811 1 0.039 6 0.236 FX-301G STD 55 2.165 35 1.378 12 0.472 100 3.937 28 1.102 30 1.181 35 1.378 600 23.622 150 5.906 3 0.118 FAST 40 1.575 24 0.945 8 0.315 65 2.559 20 0.787 22 0.866 25 0.984 350 13.780 110 4.331 2 0.079 LONG 100 3.937 50 1.969 16 0.630 150 5.906 42 1.654 46 1.811 56 2.205 800 31.496 220 8.661 4 0.157 10 0.394 FX-301H 50 1.969 25 0.984 8 0.315 75 2.953 21 0.827 23 0.906 28 1.102 400 15.748 110 4.331 2 0.079 5 0.197 STD (Note) FAST 30 1.181 18 0.709 5 0.197 40 1.575 15 0.591 16 0.630 20 0.787 240 9.449 80 3.150 1.5 0.059 3 0.118 Note: Infrared types are easily affected by humidity, so if using them in environments with high humidity or where the humidity fluctuates, please contact our office. (mm in) Reflective type FD-B8 FD-FM2 FD-NFM2 FD-W8 FD-P80 FD-AFM2 FD-G4 FD-EG1 FD-E12 FD-E22 FD-G6X 80 3.150 46 1.811 16 0.630 23 0.906 40 1.575 40 1.575 22 0.866 6 0.236 2 0.079 6 0.236 22 0.866 LONG FX-301B STD 40 1.575 23 0.906 8 0.315 11 0.433 20 0.787 20 0.787 11 0.433 3 0.118 1 0.039 3 0.118 11 0.433 FAST 26 1.024 15 0.591 5 0.197 8 0.315 13 0.512 13 0.512 8 0.315 2 0.079 2 0.079 6 0.236 LONG 42 1.654 24 0.945 8 0.315 14 0.551 20 0.787 18 0.709 12 0.472 3 0.118 1 0.039 3 0.118 12 0.472 21 0.827 12 0.472 4 0.157 7 0.276 10 0.394 9 0.354 6 0.236 1.5 0.059 1.5 0.059 6 0.236 FX-301G STD 14 0.551 8 0.315 2 0.079 4 0.157 7 0.276 5 0.197 4 0.157 1 0.039 1 0.039 4 0.157 FAST 26 1.024 20 0.787 6 0.236 11 0.433 18 0.709 12 0.472 7 0.276 10 0.394 1 0.039 6 0.236 18 0.709 LONG FX-301H STD 13 0.512 10 0.394 3 0.118 5.5 0.217 9 0.354 6 0.236 3.5 0.138 5 0.197 3 0.118 9 0.354 (Note) FAST 9 0.354 7 0.276 2 0.079 3 0.118 6 0.236 4 0.157 2 0.079 3 0.118 2 0.079 5 0.197 Note: Infrared types are easily affected by humidity, so if using them in environments with high humidity or where the humidity fluctuates, please contact our office. Sensing range when using in combination with FR-WKZ11 reflector (optional) The sensing ranges are the values for FX-305 / FX-301 infrared types. (mm in) 100 to 3,200 3.937 to 125.984 (LONG), 100 to 2,000 3.937 to 78.740 (STD), 100 to 1,600 3.937 to 62.992 (FAST), 100 to 1,000 3.937 to 39.370 (S-D) RF-230 RF-220 100 to 2,400 3.937 to 94.488 (LONG), 100 to 1,300 3.937 to 51.181 (STD), 100 to 1,000 3.937 to 39.370 (FAST), 100 to 600 3.937 to 23.622 (S-D) RF-210 100 to 1,100 3.937 to 43.307 (LONG), 100 to 700 3.937 to 27.559 (STD), 100 to 550 3.937 to 21.654 (FAST), 100 to 300 3.937 to 11.811 (S-D) Note: The sensing range indicates the allowable setting range for the reflector. The fiber head can detect objects at distances of 100 mm 3.937 in or less. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head. If this occurs, adjust the threshold value of the amplifier before use. 27 Thru-beam type Reflective type FX-300 FIBER OPTIONS Lens (For thru-beam type fiber) Designation Model No. Description Sensing range for red LED type (mm) [Lens on both sides] (Note 3) Increases the sensing Mode range by 5 times or more. U-LG LONG STDF STD FAST S-D H-SP Fiber FT-B8 3,500 (Note 2) 3,500 (Note 2) 3,000 2,500 2,000 1,000 1,000 • Ambient temperature: FT-FM2 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 2,500 1,300 1,000 �60 to �350 �C FT-T80 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 2,500 1,300 1,000 Expansion �76 to �662 �F FT-R80 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 2,300 1,600 800 750 FT-W8 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 2,900 2,000 1,000 900 lens FX-LE1 FT-P80 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 2,500 1,100 1,000 (Note 1) FT-P60 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 1,500 900 800 FT-P81X 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,100 950 FT-H35-M2 (Note 2) (Note 2) 3,500 3,500 2,500 2,000 1,500 750 700 FT-H20W-M1 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,300 900 500 400 FT-H20-M1 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,100 900 600 Sensing range for red LED type (mm) [Lens on both sides] (Note 3) Tremendously increases the Mode sensing range with large U-LG LONG STDF STD FAST S-D H-SP Fiber diameter lenses. FT-B8 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) FT-FM2 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) • Ambient temperature: FT-R80 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,500 3,500 3,500 3,500 3,500 3,500 3,500 Super- �60 to �350 �C FT-W8 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) expansion FT-P80 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) �76 to �662 �F FX-LE2 lens FT-P60 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) (Note 1) FT-P81X 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) FT-H35-M2 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) FT-H20W-M1 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,500 1,600 (Note 2) FT-H20-M1 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) 1,600 (Note 2) FT-H13-FM2 (Note 2) 3,500 (Note 2) (Note 2) 3,500 (Note 2) 3,500 (Note 2) 3,500 (Note 2) (Note 2) 3,500 3,500 3,500 Sensing range for red LED type (mm) [Lens on both sides] (Note 3) Beam axis is bent by 90 �. Mode LONG STD FAST S-D Fiber • Ambient temperature: FT-B8 1,100 530 400 186 �60 to �300 �C FT-FM2 1,200 600 440 210 �76 to �572 �F FT-T80 1,200 600 440 210 FT-W8 900 450 330 160 Side-view FX-SV1 FT-P80 1,200 600 440 210 lens FT-P60 650 300 200 130 FT-P81X 1,200 600 440 200 FT-H35-M2 550 280 200 90 FT-H20W-M1 310 140 100 50 FT-H20-M1 550 280 200 90 Expansion Sensing range increases by Sensing range for red LED type (mm) [Lens on both sides] (Note 3, 4) lens for 10 times or more. Mode U-LG LONG STDF STD FAST S-D H-SP FV-LE1 Fiber vacuum fiber • Ambient temperature: FT-H30-M1V 1,600 1,200 650 450 300 150 200 (Note 1) �40 to �120 �C �40 to �248 �F Notes: 1) Be careful when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult. Especially when installing a fiber with many cores (sharp bending fibers and heat-resistant glass fiber), please be sure to use it only after you have adjusted it sufficiently. 2) The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long (FT-H20W-M1, FT-P81X and FT-H20-M1: 1,600 mm 62.992 in). 3) The sensing ranges are the values for red LED type amplifier. Please contact our office for details on sensing ranges for other types of amplifiers. 4) The fiber cable length for the FT-H30-M1V is 1 m 3.281 ft. The sensing ranges in U-LG and LONG modes take into account the length of the FT-J8 atmospheric side fiber. Lens (For reflective type fiber) Designation Model No. Description Pinpoint spot of "0.5 mm "0.020 in. Enables detection of minute objects or small marks. Pinpoint spot FX-MR1 • Distance to focal point: 6�1 mm 0.236 � 0.039 in • Applicable fibers: FD-WG4, FD-G4 lens • Ambient temperature:�40 to �70 �C �40 to �158 �F The spot diameter is adjustable from "0.7 mm Sensing range for red LED type (Note) Screw-in to "2 mm "0.028 in to "0.079 in according to depth Screw-in depth Distance to focal point Spot diameter how much the fiber is screwed in. Zoom lens FX-MR2 7 mm 18.5 mm approx. "0.7 mm • Applicable fibers: FD-WG4, FD-G4 Distance to 12 mm 27 mm approx. "1.2 mm • Ambient temperature:�40 to �70 �C �40 to �158 �F focal point Spot 14 mm 43 mm approx. "2.0 mm • Accessory: MS-EX-3 (mounting bracket) diameter Sensing range for red LED type (Note) Extremely fine spot of "0.3 mm "0.012 in approx. achieved. Fiber model No. Distance to focal point Spot diameter Finest spot • Applicable fibers: FD-WG4, FD-G4, 7.5�0.5 mm "0.15 mm approx. FX-MR3 FD-EG3 lens FD-EG1, FD-EG2, FD-EG3, FD-G6X, FD-G6 FD-EG2 7.5�0.5 mm "0.2 mm approx. • Ambient temperature: FD-EG1 7.5�0.5 mm "0.3 mm approx. �40 to �70 �C �40 to �158 �F FD-WG4/G4/G6X/G6 7.5�0.5 mm "0.5 mm approx. Sensing range for red LED type (Note) Distance to Extremely fine spot of "0.1 mm "0.004 in focal point approx. achieved. Fiber model No. Distance to focal point Spot diameter Finest spot • Applicable fibers: FD-WG4, FD-G4, FD-EG3 7�0.5 mm "0.1 mm approx. FX-MR6 Spot diameter lens FD-EG1, FD-EG2, FD-EG3, FD-G6X, FD-G6 7�0.5 mm "0.15 mm approx. FD-EG2 • Ambient temperature: FD-EG1 7�0.5 mm "0.2 mm approx. �20 to �60 �C �4 to �140 �F FD-WG4/G4/G6X/G6 7�0.5 mm "0.4 mm approx. Screw-in depth FX-MR2 is converted into a side-view type Sensing range for red LED type (Note) and can be mounted in a very small Zoom lens Screw-in depth Distance to focal point Spot diameter space. Side-view FX-MR5 Distance 8 mm 13 mm approx. "0.5 mm • Applicable fibers: FD-WG4, FD-G4 to focal type 10 mm 15 mm approx. "0.8 mm point • Ambient temperature: 30 mm approx. "3.0 mm 14 mm �40 to �70 �C �40 to �158 �F Spot diameter Note: The sensing ranges are the values when used in combination with red LED type amplifier. Please contact our office for details on sensing ranges for other types of amplifier. 28 For reflective type fiber For thru-beam type fiber FX-300 FIBER OPTIONS Others Protective tube Designation Model No. Description • FTP-� • FDP-� FTP-500 (0.5 m 1.640 ft) FT-B8 FT-P80 For FT-FM2 FT-P60 FTP-1000 (1 m 3.281 ft) M4 FT-FM2S FT-FM2S4 thread FT-H13-FM2 Protective tube FTP-1500 (1.5 m 4.921 ft) For thru-beam Fiber bender ( ) type fiber FTP-N500 (0.5 m 1.640 ft) FT-T80 FT-P40 • FB-1 For FT-NFM2 FD-T40 M3 FTP-N1000 (1 m 3.281 ft) FT-NFM2S FD-P40 The protective tube, made thread of non-corrosive stainless FTP-N1500 (1.5 m 4.921 ft) FT-NFM2S4 steel, protects the inner FDP-500 (0.5 m 1.640 ft) fiber cable from any FD-B8 FD-P80 Fiber cutter For external forces. FD-FM2 FT-H13-FM2 FDP-1000 (1 m 3.281 ft) M6 • FX-CT2 FD-FM2S thread FD-FM2S4 Protective tube FDP-1500 (1.5 m 4.921 ft) For reflective ( ) type fiber FDP-N500 (0.5 m 1.640 ft) FD-T80 For FD-NFM2 M4 FDP-N1000 (1 m 3.281 ft) FD-NFM2S thread FD-NFM2S4 FDP-N1500 (1.5 m 4.921 ft) • FX-CT1 The fiber bender bends the sleeve part of the fiber head at the Fiber bender FB-1 proper radius. (Note) Horizontal mounting type MS-AJ1-F Universal sensor Mounting stand assembly for fiber mounting stand (For M3, M4 or M6 threaded head fiber) MS-AJ2-F Vertical mounting type Universal sensor mounting stand Using the arm which enables adjustment in the horizontal direction, sensing can also FX-CT2 The free-cut type fiber can be easily cut. be done from above an assembly line. Fiber cutter Accessory. FX-CT1 is attached with the FT-P80 or the FD-P80. 360 � rotation • MS-AJ1-F The FX-CT2 is provided with fibers other than this. FX-CT1 Attachment for This is the attachment for the fixed length fiber. (Accessory) FX-AT2 Height fixed-length fiber adjustment: 150 mm Attachment for "2.2 mm This is the attachment for the "2.2 mm "0.087 in fiber. 5.906 in FX-AT3 "0.087 in fiber (Accessory. Does not attach with the FT-P80 or the FD-P80.) approx. 360 � 20 � rotation Mounting hole Attachment for "1 mm 20 � for M6 screw FX-AT4 This is the attachment for the "1 mm "0.039 in fiber. (Accessory) Angle adjustment:�20° "0.039 in fiber Attachment for "1.3 mm • MS-AJ2-F 360 � rotation This is the attachment for the "1.3 mm "0.051 in fiber. FX-AT5 "0.051 in fiber (Accessory) Attachment for "1 mm This is the attachment for the "1 mm "0.039 in / "1.3 mm "0.039 in / "1.3 mm FX-AT6 Height "0.051 in mixed fiber. (Accessory) adjustment: "0.051 in mixed fiber 150 mm Note: Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber. 5.906 in approx. 360 � rotation Mounting hole 20 � Fiber attachment for M6 screw 20 � Angle adjustment:�20° It’s possible to simultaneously cut two fibers to the same length Each fiber (with some exceptions) has a newly FX-AT4/AT5/AT6 FX-AT2 FX-AT3 developed two-in-one fiber attachment (FX-AT3/AT4/AT5/AT6) which enables two fibers to be cut simultaneously to the same length with the new fiber cutter (FX-CT2). Also, since the fibers can be attached to the amplifier while being fixed in position in the two-in-one fiber attachment, sensitivity changes resulting from variation in the amount of fiber insertion do not occur. Guide to interchanging fiber length and sleeve length Custom-ordered products are available with different fiber lengths and sleeve lengths in order to respond quickly to different requirements. Fiber cable length change Custom-ordered product (Typical) Sleeve length change • Fiber length can be set up to 30 m 98.425 ft in units of 1 m 3.281 ft �������� FT-B8, FT-AFM2 etc. • Sleeve length can be set up to 12 cm 4.724 in units of 1 cm 0.394 in ������ FT-FM2S4, FD-NFM2S4 etc. Please contact us. 29 Applicable fibers FX-300 SPECIFICATIONS Refer to the ‘Sensor general catalog 2003-2004’ for fiber specifications. Standard type High-speed Type High-function type type Red LED Blue LED Green LED Infrared LED NPN output FX-301 FX-301B FX-301G FX-301H FX-301-HS FX-305 PNP output FX-301P FX-301BP FX-301GP FX-301HP FX-301P-HS FX-305P Item Supply voltage 12 to 24 V DC�10 % Ripple P-P 10 % or less Power consumption Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage) Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) ECO mode: 430 mW or less (Current consumption 18 mA or less at 24 V supply voltage) NPN open-collector transistor NPN open-collector transistor 2 outputs • Maximum sink current:100 mA (50 mA, if five, or more, amplifiers are connected in cascade.) • Maximum sink current: 50 mA each (Note 1) • Applied voltage: 30 V DC or less (between output and 0 V) • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) sink current.] • Residual voltage: 1.5 V or less [at 50 mA (Note 1)] Output PNP open-collector transistor PNP open-collector transistor 2 outputs • Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade.) • Maximum source current: 50 mA each (Note 1) • Applied voltage: 30 V DC or less (between output and �V) • Applied voltage: 30 V DC or less (between output and �V) • Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) source current.] • Residual voltage: 1.5 V or less [at 50 mA (Note 1)] Output operation Selectable either Light-ON or Dark-ON, with jog switch Short-circuit protection Incorporated 35!s or less (H-SP), 65 !s or less (H-SP), 150 !s or less (FAST), 65 !s or less [H-SP (Red LED type only)], 150 !s or less (FAST), 150!s or less (FAST), 250 !s or less (STD), 700 !s or less (STDF), 250 !s or less [STD / S-D (Red LED type only)], 250!s or less (STD / S-D), Response time 2.5 ms or less (LONG), 4.5 ms or less (U-LG), 2 ms or less (LONG), selectable with jog switch 2 ms or less (LONG), selectable with jog switch selectable with jog switch Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / 2-level teaching / Limit teaching / Manual adjustment / Sensitivity setting Max. sensitivity teaching / Manual adjustment Full-auto teaching / Max. sensitivity teaching Window comparator mode: Teaching (1-level / 2-level / 3-level) / Manual adjustment Operation indicator Orange LED (lights up when the output is ON) Stability indicator Green LED (lights up under stable light received condition or stable dark condition) MODE indicator RUN: Green LED, TEACH � ADJ � L/D ON � TIMER � PRO: Yellow LED Digital display 4 digit red LED display Incorporated Fine sensitivity adjustment function Incorporated with variable ON-delay / OFF-delay / ONE-SHOT timer, Incorporated with variable ON-delay / OFF-delay / switchable either effective or ineffective. ONE-SHOT / ON-delay • OFF-delay / ON-delay • ONE- Timer function Timer period: Red LED type; 0.5 ms approx., 1 ms to 9999 ms SHOT timer, switchable either effective or ineffective. [ ] (Blue LED, Green LED, Infrared LED type; approx. 0.5 ms to 500 ms) (Timer period: Output 1; 0.5 ms, 1 ms to 9999 ms, Output 2; 0.5 ms, 1 ms to 500 ms) Incorporated (Note 2) Incorporated (Note 2) Light emitting amount selection Incorporated (Red LED type only)(Note 2) FAST, STD, LONG: 4 level FAST, STD, STDF, LONG, U-LG: 4 level function FAST, STD, LONG: 4 level, H-SP: 3 level, S-D: 2 level H-SP, S-D: 2 level H-SP: 3 level Incorporated [Up to four sets of fiber heads can be Automatic interference Incorporated (Up to four sets of fiber heads can be mounted mounted close together. (However, U-LG mode is 8 prevention function close together. However, H-SP mode is 2 fiber heads.)(Note 3) fiber heads, H-SP mode is 2 fiber heads.)] (Note 4) �10 to �55 �C �14 to �131 �F (If 4 to 7 units are connected in cascade: �10 to �50 �C �14 to �122 �F, if 8 to 16 units are connected Ambient temperature in cascade: �10 to �45 �C �14 to �113 �F (No dew condensation or icing allowed), Storage: �20 to �70 �C �4 to �158 �F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face Ambient illuminance Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 5) Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 5) 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each Vibration resistance 2 Shock resistance 98 m/s acceleration (10 G approx.) in X, Y and Z directions for five times each Emitting element (modulated) Red LED Blue LED Green LED Infrared LED Red LED Red LED Material Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, MODE key: Acrylic, Jog switch: Heat-resistant ABS (FX-301B/G/H: Acrylic) Connecting method Connector (Note 6) 2 Cable extension Extension up to total 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm , or more, cable. Weight Net weight: 20 g approx., Gross weight: 25 g approx. Notes: 1) 50 mA per output. 25 mA if five, or more, amplifiers are connected in cascade. 2) The light emitting amount can be zero (emission halt) in all modes. 3) When the power supply is switched on, the light emission timing is automatically set for interference prevention. 4) When the interference prevention function ‘ ’ is set, the number of mountable fiber heads becomes double. Furthermore, take care that the response time also becomes double. 5) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. 6) The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cables given below. Main cable (3-core) for FX-301(P)(-HS): CN-73-C1 (Cable length 1 m 3.281 ft), CN-73-C2 (Cable length 2 m 6.562 ft), CN-73-C5 (Cable length 5 m 16.404 ft) Sub cable (1-core) for FX-301(P)(-HS): CN-71-C1 (Cable length 1 m 3.281 ft), CN-71-C2 (Cable length 2 m 6.562 ft), CN-71-C5 (Cable length 5 m 16.404 ft) Main cable (4-core) for FX-305(P): CN-74-C1 (Cable length 1 m 3.281 ft), CN-74-C2 (Cable length 2 m 6.562 ft), CN-74-C5 (Cable length 5 m 16.404 ft) Sub cable (2-core) for FX-305(P): CN-72-C1 (Cable length 1 m 3.281 ft), CN-72-C2 (Cable length 2 m 6.562 ft), CN-72-C5 (Cable length 5 m 16.404 ft) 30 Environmental resistance Model No. FX-300 I/O CIRCUIT DIAGRAMS FX-301(-HS) NPN output type FX-305 NPN output type Color code Color code of quick-connection cable D (Brown) �V (Note 1) D (Brown) �V (Note 1) Load Load (Black) Output 1 Tr1 (Black) Output Load � � 12 to 24 V DC 12 to 24 V DC (White) Output 2 50 mA max. (Note 2) �10 % Tr2 ZD1 �10 % � � Tr 100 mA max. (Note 2) ZD 50 mA max. (Note 2) ZD2 (Blue) 0 V (Note 1) (Blue) 0 V (Note 1) Internal circuit Users’ circuit Internal circuit Users’ circuit Notes: 1) The quick-connection sub cable does not have �V (brown) and 0 V (blue). Notes: 1) The quick-connection sub cable does not have �V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. The power is supplied from the connector of the main cable. 2) 50 mA max., if five amplifiers, or more, are connected together. 2) 25 mA max., if five amplifiers, or more, are connected together. Symbols … D : Reverse supply polarity protection diode Symbols … D: Reverse supply polarity protection diode ZD: Surge absorption zener diode ZD1, ZD2: Surge absorption zener diode Tr : NPN output transistor Tr1, Tr2 : NPN output transistor FX-301P(-HS) FX-305P PNP output type PNP output type Color code Color code of quick-connection cable (Brown) �V (Note 1) (Brown) �V (Note 1) 50 mA max. (Note 2) ZD1 ZD 100 mA max. (Note 2) � � 12 to 24 V DC 12 to 24 V DC Tr1 (Black) Output 1 50 mA max. (Note 2) ZD2 Tr �10 % �10 % (Black) Output � � Load Tr2 (White) Output 2 Load Load D (Blue) 0 V (Note 1) (Blue) 0 V (Note 1) D Internal circuit Users’ circuit Internal circuit Users’ circuit Notes: 1) The quick-connection sub cable does not have �V (brown) and 0 V (blue). Notes: 1) The quick-connection sub cable does not have �V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. The power is supplied from the connector of the main cable. 2) 50 mA max., if five amplifiers, or more, are connected together. 2) 25 mA max., if five amplifiers, or more, are connected together. Symbols … D : Reverse supply polarity protection diode Symbols … D: Reverse supply polarity protection diode ZD: Surge absorption zener diode ZD1, ZD2: Surge absorption zener diode Tr : PNP output transistor Tr1, Tr2 : PNP output transistor PRECAUTIONS FOR PROPER USE Refer to the ‘Sensor general catalog 2003-2004’ for fiber precautions. Operation procedure This product is not a safety sensor. Its use is not • When the power supply is switched on, communication self-check is intended or designed to protect life and prevent body carried out and normal condition is displayed [MODE indicator / RUN injury or property damage from dangerous parts of (green) lights up and the digital display shows incident light intensity]. machinery. It is a normal object detection sensor. •When MODE key is pressed, the mode changes as per the diagram below. Part description Power supply switched on MODE indicator / L/D ON (Yellow) Operation indicator Stability indicator (Orange)(Note 1) (Green)(Note 2) MODE indicator / TIMER (Yellow) Communication self-check MODE indicator / RUN (Green) Press MODE key MODE indicator / Refer to ‘PRO mode’ MODE key PRO (Yellow) RUN PRO MODE indicator / TEACH (Yellow) on p.33 Digital display (Red) MODE indicator / ADJ (Yellow) Jog switch Press Press MODE key MODE key Refer to Refer to Notes: 1) FX-305(P); Output 1 operation indicator (Orange) ‘Teaching’ on p.32 TEACH TIMER ‘Timer operation 2) FX-305(P); Output 2 operation indicator (Orange) setting’ on p.33 Press MODE key Press MODE key Refer to Refer to L/D ON ADJ ‘Threshold value ‘Output operation Press MODE key fine adjustment’ on p.33 setting’ on p.33 When jog switch is pressed, the setting is confirmed. When MODE key is pressed for 2 sec., or more, the sensor returns to the RUN mode. Cancellation is possible by pressing MODE key during setting. For FX-305(P) The FX-305 is equipped with two independent outputs, but the items that can be set in output 1 and output 2 respectively are only the following. The items other than those are common. 1 Threshold value 2 Output operation 3 Timer operation and Timer period 4 Sensing mode 31 Sensor circuit Sensor circuit Sensor circuit Sensor circuit FX-300 PRECAUTIONS FOR PROPER USE Refer to the ‘Sensor general catalog 2003-2004’ for fiber precautions. Teaching In case of limit teaching • The threshold values can be set by normal mode (2-level teaching, limit teaching • This is the method of setting the threshold value by teaching only the object or full-auto teaching) or window comparator mode (1-level / 2-level / 3-level absent condition (stable incident light condition). This is used for detection teaching) [FX-305(P) only], when the MODE indicator / TEACH (yellow) lights up. in the presence of a background body or for detection of minute objects. In case of 2-level teaching Step Description Display • This is the method of setting the threshold value by teaching two levels, corresponding to the object present and object absent conditions. Normally, setting is done by this method. Set the fiber within the sensing Step Description Display range. Press the MODE key to light up Set the fiber within the sensing 1 MODE indicator / TEACH (yellow). range. Press the MODE key to light up 1 MODE indicator / TEACH (yellow). For the FX-305(P), select ‘ ’ or ‘ ’ beforehand. Press the jog switch in the object absent condition. For the FX-305(P), select ‘ ’ or ‘ ’ beforehand. If the teaching is accepted, the read incident light Press jog switch in the object present condition. intensity blinks in the digital display. If the teaching is accepted, the read incident light intensity blinks in the digital display. type Reflective type 2 2 Thru-beam type Reflective type Background Mark body Beam Background interrupted condition Beam received condition MODE indicator / TEACH (yellow) blinks. Press the jog switch in the object absent condition. MODE indicator / TEACH (yellow) blinks. 3 Thru-beam type Reflective type Turn jog switch to the ‘�’ side or ‘�’ side. 3 If the jog switch is turned to the ‘�’ side, ‘ ’ scrolls Mark (twice)(Note 2) the display from right to left, and the Beam threshold level is shifted to a value Background received condition � approx. 15 % higher (lower sensitivity) If the teaching is accepted, the read incident light intensity blinks in the than that set at 2. (Note 1) digital display and the threshold value is set at the mid-value between the This is used in case of reflective type incident light intensities in the object present and the object absent fibers. 4 conditions. After this, the judgment on the stability of sensing is displayed. If the jog switch is turned to the ‘�’ side, ‘ ’ scrolls • In case stable sensing is possible: ‘ ’ is displayed. (twice) (Note 2) the display from left to right, and the • In case stable sensing is not possible: ‘ ’ blinks. threshold level is shifted to a value � approx. 15 % lower (higher sensitivity) The threshold value is displayed. 5 4 than that set at 2. (Note 1) This is used in case of thru-beam 6 ‘ ’ blinks in the digital display. (FX-301B/G/H only) type fibers. High The incident light intensity in the digital display and the OFF ON 7 Threshold value setting is complete. 15 % Incident light intensity 100 % with object absent Notes: 1) Do not move or bend the fiber cable after the sensitivity setting. Detection may become unstable. 15 % Threshold value 2) In case of using the reflective type fibers, if Jog switch is pressed in the object absent condition ON OFF Low at 2 and 3, the sensitivity is set to the maximum. 0 Turn to ‘�’ side Turn to ‘�’ side In case of full-auto teaching • Full-auto teaching is used when it is desired to set the threshold value After this, the judgment on whether the setting shift without stopping the assembly line, with the object in the moving condition. amount can be shifted or not is displayed. 5 • In case shifting is possible: ‘ ’ blinks. Step Description Display • In case shifting is not possible: ‘ ’ blinks. Set the fiber within the sensing range. Press MODE key to light up 6 The threshold value is displayed. 1 MODE indicator / TEACH (yellow). 7 ‘ ’ blinks in the digital display. (FX-301B/G/H only) For the FX-305(P), select ‘ ’ or ‘ ’ beforehand. Press the jog switch continuously for 0.5 sec. or more 2 The incident light intensity appears in the digital display with the object moving on the assembly line. (The 8 and the setting is complete. incident light intensity is displayed during sampling.) Notes: 1) The FX-301B/G/H has no scroll display. ‘ ’ is displayed on the digital display. Release the jog 3 2) The approx. 15 % amount of shift is the initial value. The amount of shift switch when the object has passed. can be changed in the PRO mode from approx. 5 to 80 % (5 % step). If the teaching is accepted, the read incident light intensity 3)Do not move or bend the fiber cable after the sensitivity setting. blinks in the digital display and the threshold value is set Detection may become unstable. at the mid-value between the incident light intensities in 4 the object present and the object absent conditions. After Please refer to the ‘Sensor general catalog 2003-2004’ or website this, the judgment on the stability of sensing is displayed. (http://www.sunx.jp) for setting of threshold value when used in • In case stable sensing is possible: ‘ ’ is displayed. combination with contact type liquid level detection fiber FD-F8Y, and for • In case stable sensing is not possible: ‘ ’ blinks. setting of threshold value when used in combination with pipe-mountable liquid level detection fiber FD-F4�. 5 The threshold value is displayed. 6 ‘ ’ blinks in the digital display. (FX-301B/G/H only) The incident light intensity in the digital display and the 7 setting is complete. Notes: 1) The threshold value’s shift amount can be selected in PRO mode. (Increments of 5 % between �45 and 45 % for setting possible. 0 % default.) 2)Do not move or bend the fiber cable after the sensitivity setting. Detection may become unstable. 32 Threshold value FX-300 PRECAUTIONS FOR PROPER USE Threshold value fine adjustment PRO mode • PRO settings can be done when MODE indicator / PRO (yellow) lights up. Step Description Display PRO mode table Press the MODE key to light up MODE indicator / ADJ (yellow). 1 Display Description 1 Response time change function ‘ ’ 2 Timer setting function ‘ ’ For the FX-305(P), select ‘ ’ or ‘ ’ beforehand. 3 Hysteresis function ‘ ’ PRO1 In case the threshold value is to be increased 4 Stability function ‘ ’ (sensitivity to be reduced), turn the jog switch to � 5 Shift function ‘ ’ the ‘�’ side to increase the threshold value 6 Emitting power selection function ‘ ’ (Note 1) slowly. If the jog switch is turned continuously to 1 Digital display setting function ‘ ’ the ‘�’ side, the threshold value increases rapidly. 2 or PRO2 2 Digital display inversion function ‘ ’ In case the threshold value is to be decreased 3 ECO mode setting function ‘ ’ (sensitivity to be increased), turn the jog switch to � 1 Data bank load setting function ‘ ’ the ‘�’ side to decrease the threshold value PRO3 2 Data bank save setting function ‘ ’ slowly. If the jog switch is turned continuously to the ‘�’ side, the threshold value decreases 1 Setting condition copy function ‘ ’ rapidly. 2 Remote data bank load setting function ‘ ’ 3 Remote data bank save setting function ‘ ’ When the jog switch is pressed, the PRO4 4 Communication condition confirmation function ‘ ’ (Note 2) threshold value is confirmed. 3 5 Communication lock function ‘ ’ 6 Back-up function ‘ ’ (Note 3) 1 Code setting function ‘ ’ 2 Adjust lock setting function ‘ ’ PRO5 3 Setting reset function ‘ ’ Output operation setting 4 Interference prevention function ‘ ’ (Note 4) Step Description Display PRO6 1 Output setting function ‘ ’, ‘ ’ (Note 4) Press the MODE key to light up Notes: 1) FX-301(P) updated version unit, FX-301(P)-HS, FX-305(P) only MODE indicator / L/D ON 2) FX-301B(P)/G(P)/H(P) only (yellow). 1 3) FX-301(P) updated version unit, FX-305(P) only Displays present 4) FX-305(P) only setting Key-lock function For the FX-305(P), select ‘ ’ or ‘ ’ beforehand. • If the jog switch and the MODE key are pressed for more than 3 sec. at If the jog switch is turn to the ‘�’ or � the same time in RUN mode condition, the key operations are locked, ‘�’ direction, the output operation Light state � 2 setting will change. and only the threshold value confirmation function or the adjust function (valid only when the adjust lock function is canceled) is valid. Dark state Wiring When the jog switch is pressed, • When the emission halt of the emitting power switching function is set from ‘OFF’ to ‘ON’, the the threshold value is confirmed. output may be unstable. Do not use the output control for 0.5 sec. after starting emission. 3 • Make sure that the power supply is off while wiring. Displays selected setting • Verify that the supply voltage variation is within the rating. • Take care that if a voltage exceeding the rated range is applied, or if an AC power supply is directly connected, the sensor may get burnt or damaged. Timer operation setting • If power is supplied from a commercial switching regulator, ensure that the frame • When the MODE indicator / TIMER (yellow) lights up, you can set ground (F.G.) terminal of the power supply is connected to an actual ground. the type of timer and whether the timer is to be used or not. For the • In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity FX-301B/G/H, the type of timer is set in PRO mode. of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. •Further, an OFF-delay which is useful when the response of the • Take care that short-circuit or wrong wiring of the load may burn or damage the sensor. connected device is slow, etc., an ON-delay which is useful to detect only objects taking a long time to travel, and ONE-SHOT, which is useful • Do not run the wires together with high-voltage lines or power lines or put when the input specifications of the connected device require a signal of them in the same raceway. This can cause malfunction due to induction. a fixed width, are possible with the FX-301�(-HS). [Furthermore, ON- • Ensure that an isolation transformer is utilized for the DC power supply. If an delay • OFF-delay and ON-delay • ONE-SHOT timer are incorporated for auto transformer is utilized, the main amplifier or power supply may be damaged. FX-305(P).] • Make sure to use the optional quick-connection cable for the connection of the amplifier [FX-301(P)(-HS) / FX-305(P)]. Extension up to total 100 m 328.084 ft (50 m Cascading amplifiers 2 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units,) is possible with 0.3 mm , or • The FX-301(P), FX-301B/G/H(P) and FX-305(P) cannot use more, cable. However, in order to reduce noise, make the wiring as short as possible. communication for any settings other than the automatic interference prevention function. When using these amplifiers as Others well, use only the same type of amplifiers all together. However, the • Do not use during the initial transient time (0.5 sec. approx.) after the FX-301-HS(P) is not equipped with an optical communication power supply is switched on. function for setting the automatic interference prevention function, Take care that the sensor is not directly exposed to fluorescent light • so be aware of this when using these amplifiers with other amplifiers. from a rapid-starter lamp or a high frequency lighting device, as it • If the FX-301(P) updated version unit or the FX-305(P) is mounted may affect the sensing performance. with the FX-301(P) previous version unit or the FX-301B/G/H(P) in This sensor is suitable for indoor use only. • cascade, place the FX-301(P) updated version units and the FX-305 • Avoid dust, dirt, and steam. units to the right side (seen from the connector side) of the previous Take care that the product does not come in direct contact with version units. For a difference between the updated version unit and water, oil, grease, or organic solvents, such as, thinner, etc. the previous version unit, refer to ‘A difference between the updated version unit and the previous version unit’ (P.34). • This sensor cannot be used in an environment containing inflammable or explosive gasses. Never disassemble or modify the sensor. • 33 FX-300 PRECAUTIONS FOR PROPER USE Refer to the ‘Sensor general catalog 2003-2004’ for fiber precautions. Function table for FX-300 series Previous models New models FX-301(P) FX-301(P) FX-302(P) FX-303(P) FX-301(P)-HS FX-305(P) (Previous version unit) (Updated version unit) Four-chemical emitting element � APC circuit � � � g g g Four-chemical emitting element only (Note 1) � � � g g g Light emitting amount selection function � � � g g g Reduced intensity mode (S-D) g (Note 1) g � g g � 9,999 digit display � � � � � g Response time (Max. speed) 150 !s 300 !s 90 !s 65 !s 35 !s 65 !s Interference prevention function (Effective no. of units) Incorporated (4) Incorporated (8) Not incorporated (0) Incorporated (4) Not incorporated (0) Incorporated (16) Independent 2 outputs � � � � � g Alarm output function � � � � � g Error output function � � � � � g Differential sensing � � � � � g Window comparator mode � � � � g g Peripheral units that can be combined FX-CH(-P) g g � � � � FX-CH2(-P) � � � g � g SC-GU1-485 � � � g � g Note: Except FX-301B/G/H. A difference between the updated version unit and the previous version unit for FX-301 (Red LED type) Changes in appearance Changes in operation Before change After change 1. Timer selection method Previous version unit: Timer type was changed using PRO1 mode. The ‘TIMER’ Top view Top view setting in NAVI mode could only be turned on or off. After change: The type of timer can be changed using the ‘TIMER’ function in NAVI mode. 2. Checking threshold value in RUN mode Name Added to plate name plate The threshold values can be checked by turning the jog switch. Display Uses special parts Display changes Change in shape of jog switch Side view Side view 1. Checking blinking of sensitivity surplus The stable surplus display method after teaching has been changed. Previous version unit: Sensitivity surplus is indicated by the number m ‘NAVI’ is printed only on the both sides m ‘NAVI’ is printed only on a side of blinks of the stability indicator. After change Checking minor changes between previous and new models can be Digital display only done by checking whether the printing is on both sides or only one side. 2. Initial direct code value changed The factory default settings for the direct codes have been changed. Upgraded functions Previous version unit 0000 After change 0004 1. Response times added An ultra high-speed mode (H-SP) has been added to the existing 4 response time modes m The default setting for the timer period is 10 ms, and the direct code for 10 ms is ‘4’, so this has been changed. [high-speed (FAST), reduced intensity (S-D), standard (STD) and long range (LONG)]. This is changed using ‘ ’ in ‘ ’. Internal circuit changes Before change After change 1. Addition of an APC circuit 4 steps 5 steps A four-chemical emitting element which provides stable sensing over long periods has been 150 !s (FAST) 65¨s (added)(H-SP) added, as well as an APC (Auto Power Control) circuit that improves stability during short periods. 250 !s (S-D) 150 !s (FAST) Points to note when combining sensor types 250 !s (STD) 250 !s (S-D) When using the newer sensors together with previous version units (including the FX-301B/G/H), note the following. 2 ms (LONG) 250 !s (STD) • Communication is possible when the previous version units and 2 ms (LONG) the updated version units are used in an arrangement such as that shown in Figure A below. 2. Extension of timer period • If the previous version units and the updated version units are used in The setting range for the timer period was previously 500 ms, but an arrangement such as that shown in Figure B below, the interference this has been extended to a new range of 9999 ms. prevention function and the PRO4 function cannot be used. • In order to use the interference prevention function and the PRO4 function when 3. Light emitting amount selection function using previous version units and the updated version units together, it is The light emitting amount can be changed to one of 4 levels recommended that you use an arrangement such as that shown in Figure C below. (5 levels when emission halt is included). 4. Backup, copy lock and key lock functions added