OSRAM SFH4211
Description
EMITTER IR 950NM SMD
Part Number
SFH4211
Price
Request Quote
Manufacturer
OSRAM
Lead Time
Request Quote
Category
PRODUCTS - S
Datasheet
Extracted Text
GaAs-IR-Lumineszenzdiode in SMT-Gehäuse GaAs Infrared Emitter in SMT Package SFH 4211 Wesentliche Merkmale Features • GaAs-LED mit sehr hohem Wirkungsgrad • Very highly efficient GaAs-LED • Gute Linearität (I = f [I ]) bei hohen Strömen • Good Linearity (I = f [I ]) at high currents e F e F • Gleichstrom- (mit Modulation) oder • DC (with modulation) or pulsed operations are Impulsbetrieb möglich possible • Hohe Zuverlässigkeit • High reliability • Hohe Impulsbelastbarkeit • High pulse handling capability • Oberflächenmontage geeignet • Suitable for surface mounting (SMT) • Gegurtet lieferbar • Available on tape and reel • SFH 4211 Gehäusegleich mit SFH 320 • SFH 4211 same package as SFH 320 Anwendungen Applications • Miniaturlichtschranken für Gleich- und • Miniature photointerrupters Wechsellichtbetrieb, Lochstreifenleser • Industrial electronics • Industrieelektronik • For drive and control circuits • „Messen/Steuern/Regeln“ • Automotive technology • Automobiltechnik • Sensor technology • Sensorik • Alarm and safety equipment • Alarm- und Sicherungssysteme • IR free air transmission • IR-Freiraumübertragung Typ Bestellnummer Gehäuse Type Ordering Code Package Kathodenkennzeichnung: abgesetzte Ecke cathode marking: bevelled edge ® SFH 4211 Q62702-P1825 TOPLED 2000-08-24 1 SFH 4211 Grenzwerte (T = 25 °C) A Maximum Ratings Bezeichnung Symbol Wert Einheit Parameter Symbol Value Unit Betriebs- und Lagertemperatur T ; T – 40 … + 100 °C op stg Operating and storage temperature range Sperrspannung V 5V R Reverse voltage Durchlaßstrom I 100 mA F Forward current Stoßstrom, τ= 10 μs, D = 0 I 3A FSM Surge current Verlustleistung P 160 mW tot Power dissipation Wärmewiderstand Sperrschicht - Umgebung bei R 450 K/W thJA 2 Montage auf FR4 Platine, Padgröße je 16 mm Thermal resistance junction - ambient mounted 2 on PC-board (FR4), padsize 16 mm each Wärmewiderstand Sperrschicht - Lötstelle bei R 200 K/W thJS Montage auf Metall-Block Thermal resistance junction - soldering point, mounted on metal block Kennwerte (T = 25 °C) A Characteristics Bezeichnung Symbol Wert Einheit Parameter Symbol Value Unit Wellenlänge der Strahlung λ 950 nm peak Wavelength at peak emission I = 100 mA, t = 20 ms F p Spektrale Bandbreite bei 50% von I Δλ 55 nm max Spectral bandwidth at 50% of I max I = 100 mA F Abstrahlwinkel ϕ± 60 Grad Half angle deg. 2 Aktive Chipfläche 0.09 mm A Active chip area Abmessungen der aktiven Chipfläche L × B 0.3 × 0.3 mm Dimensions of the active chip area L × W 2000-08-24 2 SFH 4211 Kennwerte (T = 25 °C) A Characteristics (cont’d) Bezeichnung Symbol Wert Einheit Parameter Symbol Value Unit Schaltzeiten, Ι von 10% auf 90% und von 90% t , t 0.5 μs e r f auf 10%, bei I = 100 mA, R = 50 Ω F L Switching times, Ι from 10% to 90% and from e 90% to 10%, I = 100 mA, R = 50 Ω F L Kapazität, C 25 pF o Capacitance V = 0 V, f = 1 MHz R Durchlaßspannung, Forward voltage I = 100 mA, t = 20 ms V 1.3 (≤ 1.5) V F p F I = 1 A, t = 100 μs V 1.9 (≤ 2.5) V F p F Sperrstrom, I 0.01 (≤ 1) μA R Reverse current V = 5 V R Gesamtstrahlungsfluß, Φ 20 mW e Total radiant flux I = 100 mA, t = 20 ms F p Temperaturkoeffizient von I bzw. Φ , TC – 0.55 %/K e e I I = 100 mA F Temperature coefficient of I or Φ , e e I = 100 mA F Temperaturkoeffizient von V , I = 100 mA TC – 1.5 mV/K F F V Temperature coefficient of V , I = 100 mA F F Temperaturkoeffizient von λ, I = 100 mA TC + 0.3 nm/K F λ Temperature coefficient of λ, I = 100 mA F 2000-08-24 3 SFH 4211 Strahlstärke I in Achsrichtung e gemessen bei einem Raumwinkel Ω = 0.01 sr Radiant Intensity I in Axial Direction e at a solid angle of Ω = 0.01 sr Bezeichnung Symbol Werte Einheit Parameter Values Unit Strahlstärke I > 2.5 mW/sr e Radiant intensity I = 100 mA, t = 20 ms F p Strahlstärke I 45 mW/sr e typ. Radiant intensity I = 1 A, t = 100 μs F p Radiation Characteristics S = f (ϕ) rel OHL01660 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 1.0 50˚ 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 0.8 0.6 0.4 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚ 2000-08-24 4 SFH 4211 Ι e Relative Spectral Emission Radiant Intensity = f (I ) Permissible Pulse Handling F Ι 100 mA e I = f (λ) Capability I = f (t ), duty cycle rel F p Single pulse, t = 20 μs D = parameter, T = 20 °C p A OHR01938 2 OHR01551 10 100 4 OHR00860 10 A Ι mA t p % e Ι F t p Ι Ι Ι rel 5 e 100 mA D = F 80 T 1 10 D = 0.005 T 0.01 60 0.02 0 3 0.05 10 10 0.1 40 0.2 5 -1 10 0.5 20 DC 2 -2 10 0 10 -5 -4 -3 -2 -1 0 1 2 -3 -2 -1 0 1 880 920 960 1000 nm 1060 10 10 10 10 10 10 10 s 10 10 10 10 10 A 10 t p λ Ι F Forward Current Max. Permissible Forward Current I = f (V ), single pulse, t = 20 μs I = f (T ) F F p F A OHR00883 OHR01554 1 120 10 mA A I F Ι F 100 0 10 80 R = 450 K/W thjA -1 10 60 40 -2 10 20 -3 10 0 0 20 40 60 80 100 ˚C 120 01 2 3 4 5 6 V 8 V T F A 2000-08-24 5 SFH 4211 Maßzeichnung Package Outlines 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 1.7 (0.067) 2.3 (0.091) 0.1 (0.004) (typ.) 0.9 (0.035) 0.7 (0.028) 2.1 (0.083) Cathode marking 0.18 (0.007) 0.6 (0.024) 0.12 (0.005) 0.4 (0.016) GPLY6724 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2000-08-24 6 3.4 (0.134) 3.0 (0.118) (2.4) (0.095) 3.7 (0.146) 3.3 (0.130) 1.1 (0.043) 4˚±1 0.5 (0.020) SFH 4211 Löthinweise Soldering Conditions Bauform Tauch-, Schwall- und Schlepplötung Reflowlötung Types Dip, Wave and Drag Soldering Reflow Soldering Lötbad- Maximal Abstand Lötzonen- Maximale temperatur zulässige Lötstelle – temperatur Durchlaufzeit Lötzeit Gehäuse Temperature Max. Perm. Distance Temperature Max. Transit of the Soldering Time between of Soldering Time Soldering Bath Solder Joint Zone and Case ® TOPLED 260 °C 10 s – 245 °C10s Zusätzliche Informationen über allgemeine Lötbedingungen erhalten Sie auf Anfrage. For additional information on general soldering conditions please contact us. 2000-08-24 7
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SFH4211 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers



What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods