™ All–in–one Micro PC The 5266 CPU card is a high–performance, low– power, 6th generation x86 workhorse for embedded applications.The 5266 offers a rich family of essential I/O functions. It integrates video, serial ports, Ethernet, digital I/O (shared with the LPT), audio and USB networking into a single card. Support for two hard drives gives this card the versatility to adapt to any application. The 5266 is the solution for applications in transportation, security, military, communications, distributed control, point– of–sale, ticketing machines, weighing equipment, and other similar environments. The low–power requirements Technical description make it suitable for situations where battery life or heat dissipation is a concern. Busses LPC Bus (internal): 33 MHz Octagon’s Micro PC form factor provides a proven family PCI Bus (internal): 33 MHz, 32–bit, rev. 2.1 of low–cost expansion cards for quick and easy system ISA Bus: 8.33 MHz, 8–bit customization and confi guration. The Micro PC card cages are a convenient rack for a CPU card with one System to seven additional expansion cards. The 5266 can be ◆ CPU: low–power, 32–bit, AMD Geode LX 800 software confi gurable for 400 and 500 MHz mounted in any passive ISA backplane or used stand– operation. The CPU contains the complete x86 alone, mounted with standoffs. core, along with a host of PCI Bus functions typically implemented with external components. This CPU provides enough computing power for virtually The Geode LX 800 is 100 percent object code any embedded application. It is fully compatible with compatible with the Intel x86 microprocessors, as most operating systems. The available INT17 functions well as the MMX instruction set extensions for the acceleration of multimedia applications. for DOS provide easy access to the enhanced features such as watchdog timer, read/writes to serial EEPROM, ◆ CS5536 companion chip: Implements four USB, digital I/O, and user jumpers. IDE, and PCI–to–LPC bridge, as well as a host of internal functions such as interrupt controllers, timer, DMA controller, and GPIO manager. Through Our products are designed and manufactured with the LPC bus the CS5536 accesses the boot fl ash exacting specifi cations under the supervision of a quality and the LPC Bridge / digital I/O. management system that is ISO 9001–2000 certifi ed. ◆ Operating System: Octagon provides drivers for The 5266 will withstand high shock and vibration and ® Windows XPe, Linux and DOS. operates in temperature ranges from –40° to +70° C (500 MHz operation). This rugged, single board computer will provide years of reliable service in the most challenging environments. 7403 Church Ranch Blvd. • Westminster CO 80021 • 303–430–1500 1 www.octagonsystems.com ◆ BIOS: The General Software BIOS is fully Ethernet controller IC chip provides an 8k x PC–AT compatible. It supports all the on–board 16 SRAM buffer, and powers two LEDs for link PC peripherals. and traffi c status. The interface terminates at the standard 8–position, RJ–45 jack. At power–on the BIOS performs a Power–On– Self–Test (POST) and outputs the results via an ◆ LED. Refer to the 5266 Reference Manual for an DIGITAL I/O: 24 LINES OF DIGITAL I/O. THESE LINES WILL INTERFACE interpretation of the codes. WITH LOGIC DEVICES, SWITCH INPUTS, LEDS, AND INDUSTRY– STANDARD OPTO MODULE RACKS. THE LINES WILL SINK OR SOURCE ◆ Memory: Supports up to 1 GB DDRAM 15 MA EACH. ALL LINES CAN BE INDIVIDUALLY PROGRAMMED AS using PC2700 or PC3200 SODIMM DDR INPUTS OR OUTPUTS. OCTAGON HAS A VARIETY OF OPTO MODULES memory modules. AND TERMINATION BOARDS FOR EASY ACCESS FOR FIELD WIRING. ◆ Watchdog timer: Fail–safe against program crashes ◆ Parallel port (LPT): The digital I/O port can be or processor lockups. It has a programmable 16 confi gured in BIOS Setup as an LPT port. Refer to timeout period, ranging from 1–2 seconds. The the 5266 Reference Manual for the watchdog is enabled in BIOS SETUP and then pin routing required for connecting parallel automatically initiated on power–up. INT17 calls port devices. or OS drivers are used to set the timeout period, ◆ COM1 and COM2: Two 16C550/ 16C750– strobe, and disable the watchdog timer from your compatible serial channels are provided. One application. If the timer expires, it performs a channel is a dedicated eight–wire RS–232C hardware reset. interface; the other channel is an eight–wire interface selectable in Setup as RS–232 or Drives RS–422/485. Both channels are full duplex, ◆ EIDE: One IDE controller that supports two IDE asynchronous interfaces with a double 64–bit FIFO devices. There is a CompactFlash socket, as well as buffer. The baud rate is programmable with rates an industry–standard 44–pin, 2 mm connector for from 9600 bps to 115 Kbps. The ports provide EIDE devices such as hard drives, EIDE fl ash drives backdrive protection as well as ESD protection or CR–ROMs. For those hard drives that use a according to IEC 1000, level 3; contact discharge of 40–pin connector Octagon has a 44–pin to 40–pin ±6 kV, and air–gap discharge of ±8 kV. adapter cable. An EIDE cable connects to the CPU card connector and provides two connectors for User Interface the devices. The CompactFlash can be confi gured ◆ Monitors: CRTs with resolutions to 1600 x 1200 x as a master or slave device. Other IDE devices have 24, and 18–bit TFT fl at panels with resolutions up a jumper to designate them as a master or a slave to 1024 x 768. device. The IDE channels are UDMA 66 compliant. ◆ Serial console: You can establish communication ◆ CompactFlash: Accepts Type I or II devices. with the 5266 using a host computer as a serial CompactFlash is connected to the IDE channel and console. COM1 of the CPU card is connected appears as an IDE device. to a COM port on the host PC. A program such as SmartLINK or Hyperterminal on the host PC ◆ USB: Supports USB hard drives, fl ash drives, optical communicates to the CPU card. This allows you to drives and fl oppy drives. The drives may be used download programs or confi gure the CPU card. as boot devices, and are supported in DOS, with automatic hand–off to other OS drivers. Mounting ◆ Panel mounting: You can panel mount the 5266 I/O using four #4–40 standoff and screws (not ◆ USB: Four 2.0 compliant USB ports. USB 2.0 provided). The 5266 Reference Manual shows the provides transmission up to 480 Mbps. Legacy center–to–center mounting hole dimensions. support is provided for mouse and keyboard at boot. All four ports have over–current and ESD protection. ◆ Ethernet: A VT6106L (82559 compatible) chip provides one 10/100 Base–T Ethernet port and supports the IEEE 802.3 Ethernet standard. The 7403 Church Ranch Blvd. • Westminster CO 80021 • 303–430–1500 2 www.octagonsystems.com ◆ Digital I/O, 24 lines; sink/source 24 mA Custom cables w/industry–standard interfaces ◆ COM PORT VTC–20F cable connects to the ◆ Parallel port (LPT) implemented through digital 20–pin COM1/2 port and provides two DB–9 I/O interface female connectors. A VTC–20M provides two ◆ Two serial ports; 16C550/16C750 compatible; one DB–9 male connectors. eight–wire RS–232, one eight–wire RS–232/422/485; ◆ CMA–26 ribbon cable connects the 26–pin digital 64–byte FIFO buffered, ESD protected I/O port to an STB–26 termination board to provide ◆ Four USB ports, 2.0 compliant, legacy USB supported access for fi eld wiring. ◆ Ethernet 10/100 Base–T, ◆ 2 mm VGA–12 cable w/standard 15–pin supporting IEEE 802.3 standard VGA interface. ◆ Audio, stereo line in/line out ◆ 44–pin to 40–pin IDE cable converts the 44–pin IDE header to a 40–pin IDE header. USER INTERFACE: ◆ Two–port USB cable converts the 10–pin header for ◆ 18–bit TFT fl at panel, with resolutions to 1024 x 768; USB3,4 into two standard USB connectors. USB1,2 24–bit CRT with resolution to 1600 x 1200 are standard USB connectors. ◆ “Legacy USB” keyboard and mouse supported ◆ Serial console through COM1 to host computer Features MOUNTING: SYSTEM: ◆ Micro PC card cage ◆ 32–bit Geode LX 800 low–power CPU with CS5536 companion chip ◆ Panel mounting using standoffs and four mounting holes ◆ 400 & 500 MHz operation, selectable in setup ◆ Stacking with other Micro PC cards ◆ PC–compatible DMA controllers, interrupt controllers, and timers POWER: ◆ Drivers provided for Windows XPe, Linux and DOS ◆ 5V ±0.25V, typical 1.04A @ 500 MHz with 1 GB DDR memory ◆ General Software BIOS with fast boot and industrial extensions MISC: ◆ PLCC fl ash contains BIOS ◆ AT battery port for real time clock (battery not ◆ SO–DIMM socket for 64 – 1024 MB DDRAM necessary for operation) (0 MB standard) ◆ Size 114.3 mm x 124.46 mm (4.5” x 4.9”); Micro PC ◆ 720 bytes user–available serial EEPROM form factor 16 ◆ CPU supervisor watchdog timer with 1–2 seconds ENVIRONMENTAL: timeout, software controlled ◆ –40° to +70° C operating range. Can operate up to 85° C for brief periods. Octagon does not recommend DRIVES: sustained operation at this termperature. ◆ Standard EIDE interface supports two devices (CD–ROM, hard drive, EIDE fl ash drives, ◆ Non–Octagon DDRAM may limit temperature range other EIDE devices) ◆ CompactFlash accepts Type I or II devices HW ORDERING INFORMATION ◆ USB hard drive / fl oppy support (bootable from #6755 5266 CPU Card w/0 MB DDRAM USB devices) #7764R 1 GB DDR memory module I/O: ◆ USB mouse and keyboard ◆ On–board video controller for CRT or TFT fl at panels 7403 Church Ranch Blvd. • Westminster CO 80021 • 303–430–1500 3 3 www.octagonsystems.com FUNCTIONAL DIAGRAM FLAT PANEL CRT PC SPEAKER SDRAM AC97 CODEC AUDIO PCI BUS CS5536 USB 1,2,3,4 (2.0) CPU COMPANION COMPACTFLASH & IDE LPC BUS ETHERNET BOOT FLASH DIGITAL I/O & LPT LPC BRIDGE DIGITAL I/O COM 1/2 ISA BUS COM 2: 422/485 MICRO PC 7403 Church Ranch Blvd. • Westminster CO 80021 • 303–430–1500 4 www.octagonsystems.com