Manufacturers
MICRO/SYS SBC5651-ET
Description
Micro/Sys SBC5651 CPU Board - i.MX515 ARM Cortex-A8 CPU, 600MHz, 256MB SDRAM, 4MB NOR Flash, Ethernet, Pico-ITX form factor, -40°C to +85°C
Part Number
SBC5651-ET
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
PRODUCTS - S
Specifications
Audio/Video I/O
Microphone input, stereo line in/line out, headphone out. 24-bit TFT flat panel display output. 24-bit LVDS flat panel display output option. TV-out.
COM1-COM3 Serial Ports
Three (3) asynchronous serial ports. 16C550-compatible. RTS and CTS modem controls (on COM1). RS232 on all channels. Optional RS485/RS232 configurations.
Controller Area Network
CAN version 2.0B, 1Mbit/sec. Standard and extended data and remote frames. Two (2) receive buffers and three (3) transmit buffers with prioritized message storage.
Development Kit
Single Board Computer. Industrial Enclosure. Complete cable set and power supply. Documentation, sample software.
Digital I/O
4-wire touchscreen interface. I2C (on StackableUSB connector). SPI (on StackableUSB connector). 1-Wire interface. Two (2) PWM outputs. 8-row x 6-column keypad.
Environmental
Operating range 0° to +70°C, with 800MHz processor. ET-version operating range -40° to +85°C, with 600MHz processor. -40° to +85°C storage. 5%-95% relative humidity, non-condensing.
Ethernet Port
10/100BASE-T Ethernet port. Standard RJ45 connector.
External Connections
50-pin header for TFT/LVDS LCD display out. 50-pin header for touch, DIO, keypad, PWM, one-wire, and TVO. 40-pin header for WEIM Bus. 20-pin header for audio. 20-pin header for CAN and Uart. One (1) SD/MMC card slot. One (1) USB Mini-AB USB connector. 2-pin locking header for reset. 2.1mm barrel power input. One (1) RJ45 jack for Ethernet.
Mechanical
Pico-ITX mounting holes. 3.9” (plus I/O region) x 2.8” x .6” . Installed Secure Digital (SD) card extends past edge of board. Ethernet connector on top side has height of .535”
Memory Expansion
One (1) SD/MMC card slot.
On-board Memory
256-512MB DDR2 Synchronous DRAM. 4MB SPI NOR flash. 1-4GB NAND flash (option).
Power Requirements
Option 1: +5v ±5% at 250mA typical, 350mA max at Pin1. Option 2: +4.8v single cell Li-Ion battery at Pin2. Option 3: Mini-AB USB OTG port. Option 4: +5v through StackableUSB connector.
Processor Core Section
Freescale i.MX515 multimedia applications processor. 800MHz or 600MHz clock rate. ARM Cortex-A8 CPU core. Hardware graphics accelerators (video, OpenGL ES 2.0 and OpenVG 1.1)
Real Time Clock
RTC with rechargeable on-board battery.
USB
One (1) Full-Speed On-The-Go USB 2.0 port providing device and limited Host functions, Mini-AB connector. Three (3) High-Speed USB 2.0 Host ports, StackableUSB connector. Transfers at High-Speed 480Mbit/sec, Full-Speed 12Mbit/sec, or 1.5Mbit/sec
Watchdog Timer
Program must refresh watchdog timer periodically, or system will be reset. Enabled through software
Features
- 10/100 Ethernet
- 512MB SDRAM, 4GB Flash, 4MB SPI NOR Flash
- ARM Cortex-A8 processor, 800MHz
- Four USB ports, three serial ports
- LCD touchscreen support
- One SD/MMC card slot
- Pico-ITX form factor
- Power Options: Power-through-USB. Single cell Li-Ion battery. StackableUSB. Terminal block.
Datasheet
Extracted Text
™ ARM Cortex-A8 StackableUSB Pico-ITX Computer SBC5651 Features 9 ARM Cortex-A8 processor, 800MHz 9 512MB SDRAM, 4GB Flash, 4MB SPI NOR Flash 9 Power Options: x Power-through-USB x Single cell Li-Ion battery x StackableUSB x Terminal block 9 LCD touchscreen support 9 Four USB ports, three serial ports 9 One SD/MMC card slot 9 10/100 Ethernet 9 Pico-ITX form factor The SBC5651 is for use in small, low-power TFT), LED back light control, keypad handheld and portable devices typical to interface, SD card slot, 4G NAND flash, medical, gaming, ticketing, and test and audio, Ethernet, USB On-The-Go, a real- measurement applications. With the Freescale time clock, watchdog timer, two PWM i.MX515 ARM Cortex-A8 multimedia processor outputs, one SD/MMC card slot, 1-Wire at its core, the SBC5651 can consume as little interface, and three serial ports. For as 1W with user-programmable speeds up to additional expansion, the StackableUSB 800MHz. The SBC5651 can be powered interface allows for rugged, reliable board-to- 2 C, and SPI. through the USB OTG connector, a standard board communication via USB, I terminal block, StackableUSB, or single cell All these features make the SBC5651 ideal Lithium Ion battery. for handheld, mobile devices or remote The SBC5651 on-board I/O feature set applications requiring rich connectivity and includes LCD touchscreen support (LVDS and low power. Software Support Compatible Hardware Mounting/Packaging Linux StackableUSB Client Devices Standoffs, STDOFFUSB Windows CE PC Hosts ENC104 VxWorks TFT FP-Kits Android LVDS FP-Kits C, compilers PSxxx, Power Supplies Secure Digital Devices RS232/RS485 Devices CAN Devices Ethernet Networks SD/MMC Reset USB Ethernet OTG Power MC13892 Power Mgmt 512 MB SDRAM i.MX515 1-4GB (ARM) Flash CPU 4MB Flash (boot) TFT/LVDS Technical Details: At the heart of the SBC5651 is the Freescale In addition to the peripherals built into the i.MX515 multimedia applications processor, i.MX515, the SBC5651 adds a Controller Area a System on Chip (SOC) offering high- Network (CAN) controller and 16 bits of performance processing optimized for the 82C55A-compatible programmable parallel I/O. lowest power consumption. The core of i.MX515 is an 800MHz ARM Cortex-A8 The SBC5651 offers three boot options: A CPU. The CPU is augmented by a floating- dedicated 4MB SPI NOR flash memory, a point coprocessor, ARM’s NEON SIMD partition of the NAND flash, and a bootable media accelerator, and OpenGL ES 2.0 and SD/MMC card slot. OpenVG 1.1 hardware accelerators for fast, power-efficient graphics operations. The SBC5651 memory subsystem provides up to 512MB of DDR2 SDRAM for application The i.MX515 SOC integrates many data. The 4MB SPI NOR flash memory holds peripherals, including an interrupt controller, the bootloader and operating system. 1-4GB watchdog timer, SDRAM and flash memory NAND flash is available for operating system controllers, three (3) High-Speed USB ports, and non-volatile user storage. one (1) Full-Speed On-The-Go USB port, one (1) 10/100 Ethernet MAC, three (3) Three (3) 16C550-compatible RS232/RS485 16C550 UARTs, 1-Wire interface, resistive serial ports allow communication with low- 24-bit flat panel display output, 4-wire speed devices. resistive touchscreen interface, an 8-row x 6- column keypad controller, an audio port, and The SBC5651 can be powered from an PWM and TV outputs. external 5 VDC source, a single cell Li-Ion battery, through an on-board mini-AB USB WEIM Bus StackableUSB Audio Touch, Keypad, DIO, TVO UART/CAN power connector, or through StackableUSB. Environmental: If external power is supplied while a battery Operating range 0° to +70°C, with is plugged in, the battery will be recharged. 800MHz processor Advanced power management is enabled by ET-version operating range -40° to the new Freescale MC13892. Through user- +85°C, with 600MHz processor programmable clock rates, the SBC5651 can -40° to +85°C storage attain sub 1W power requirements. 5%-95% relative humidity, non-condensing The SBC5651 becomes a powerful front-end Processor Core Section: processor for control applications with the Freescale i.MX515 multimedia standard StackableUSB expansion. This applications processor popular I/O channel accommodates multiple 800MHz or 600MHz clock rate stacked I/O boards without use of a hub. ARM Cortex-A8 CPU core Hardware graphics accelerators (video, For true 32-bit application development, the OpenGL ES 2.0 and OpenVG 1.1) SBC5651 supports 32-bit operating systems such as Linux, Windows CE, VxWorks, and On-board Memory: Android. All have full tool suites available, 256-512MB DDR2 Synchronous DRAM including compilers and debuggers. 4MB SPI NOR flash 1-4GB NAND flash (option) Memory Expansion: Specifications: One (1) SD/MMC card slot Mechanical: Watchdog Timer: Pico-ITX mounting holes 3.9” (plus I/O region) x 2.8” x .6” Program must refresh watchdog timer Installed Secure Digital (SD) card periodically, or system will be reset extends past edge of board Enabled through software Ethernet connector on top side has height of .535” COM1-COM3 Serial Ports: Three (3) asynchronous serial ports Power Requirements: 16C550-compatible Option 1: RTS and CTS modem controls (on +5v ±5% at 250mA typical, 350mA max COM1) at Pin1 RS232 on all channels Option 2: Optional RS485/RS232 configurations +4.8v single cell Li-Ion battery at Pin2 Option 3: Ethernet Port: Mini-AB USB OTG port 10/100BASE-T Ethernet port Option 4: Standard RJ45 connector +5v through StackableUSB connector USB: One (1) Full-Speed On-The-Go USB 2.0 Power Connector port providing device and limited Host Pin Signal functions, Mini-AB connector 1 +5V Three (3) High-Speed USB 2.0 Host 2 Battery Input ports, StackableUSB connector 3 GND Transfers at High-Speed 480Mbit/sec, Full-Speed 12Mbit/sec, or 1.5Mbit/sec Controller Area Network: Ordering Information: CAN version 2.0B, 1Mbit/sec Standard and extended data and remote OEM Single Board Computers: frames SBC5651 i.MX515 ARM Cortex-A8 Two (2) receive buffers and three (3) CPU, 800MHz, 256MB transmit buffers with prioritized message SDRAM, 4MB NOR storage Flash, Ethernet, Pico-ITX form factor Real Time Clock: SBC5651-ET i.MX515 ARM Cortex-A8 RTC with rechargeable on-board battery CPU, 600MHz, 256MB SDRAM, 4MB NOR Flash, Digital I/O: Ethernet, Pico-ITX form 4-wire touchscreen interface factor, -40°C to +85°C 2 I C (on StackableUSB connector) CS5651 Complete Cable Set SPI (on StackableUSB connector) 5651OPT1(ET) Upgrade to 512MB SDRAM 1-Wire interface 5651OPT5(ET) Upgrade to 1GB flash Two (2) PWM outputs 5651OPT6(ET) Upgrade to 2GB flash 8-row x 6-column keypad 5651OPT7(ET) Upgrade to 4GB flash 5651OPT8-x (ET) Configurable RS485 Audio/Video I/O: 5651OPT22(ET) CAN Bus Interface Microphone input, stereo line in/line out, 5651OPT28(ET) LVDS Panel Support headphone out 5651OPT45 (-ET) Audio Interface 24-bit TFT flat panel display output Related Products: 24-bit LVDS flat panel display output BA4052 50-pin high density to 50- option pin screw terminal TV-out BA4040 40-pin high density to 40- pin screw terminal External Connections: BA2020 20-pin high density to 20- 50-pin header for TFT/LVDS LCD pin screw terminal display out CA4133 RJ45 Ethernet Cable 50-pin header for touch, DIO, keypad, CA4136 Mini B to Type A USB Cable PWM, one-wire, and TVO 40-pin header for WEIM Bus 20-pin header for audio Development Board Kits* . 20-pin header for CAN and Uart One (1) SD/MMC card slot DK5651-Linux SBC5651 Linux-installed One (1) USB Mini-AB USB connector development kit 2-pin locking header for reset DK5651-WinCE SBC5651 WinCE-ready 2.1mm barrel power input development kit One (1) RJ45 jack for Ethernet DK5651-ET-Linux SBC5651-ET Linux- Development Kit: installed development kit Single Board Computer (emulating the ext temp Industrial Enclosure clock speed for eval) Complete cable set and power supply DK5651-ET-WinCE SBC5651-ET WinCE- Documentation, sample software ready development kit (emulating the ext temp Cables nominally 15”, other lengths available clock speed for eval) StackableUSB trademark Micro/sys, Inc. VxWorks trademark Wind River Android trademark Google, Inc. *See Development Kit Specifications
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SBC5651-ET have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Micro/Sys SBC1586-1-ET CPU Board. Pentium CPU | 166MHz | 64MB RAM | 1M Flash | Ethernet | -40 °C to ...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods