Motherboard with 80486 SX CPU, 4/16 MByte DRAM, keyboard-controller, real time clock and 16 MByte IDE ţ ash disk DIMM-PC/486-I Technical Data CPU 486SX - 33 or 66 MHz 68 mm (2.7“) Memory up to 16 MByte onboard 16 MByte IDE compatible ţ ash disk Two serial ports COM1 and COM2 with TTL signals Floppy interface IDE harddisk interface Real time clock READY FOR One parallel port LPT1 with EPP support Keyboard controller EEPROM for CMOS-SETUP 5V only power supply Picture in original size! DP144-interface Programmable /CS output Dimensions: 68x40 mm (2.7x1.6”) Temperature: Description operation: 0° to 65°C storage: -10° to 85°C The DIMM-PC/486-I integrates the complete functiona- the Latchable adressbus LA(17..23) and the signals Max. humidity: lity of an 80486 SX motherboard with CPU, System of DMA 1,3,4 and 8 are not connected to the DIMM- operation: 10% to 90% ® BIOS, 16 MByte DRAM, keyboard controller and real PC -bus. IRQ 5, 9, 11, 15 and DMA-channels 5 storage: 5% to 95% (do not allow condensing) time clock. The DIMM-PC/486-I has a 16 MByte IDE and 7 are not available on the DIMM-PC/486-I. The compatible ţ ash-harddisk onboard. Over the connector, 80486SX-solution is designed with a highly integrated ® integrated on the board, it offers additional peripheral CPU-chip from AMD. The DIMM-PC modules are functions like COM1, COM2, LPT1, ţ oppy interface especially equipped for embedded applications with and IDE harddisk interface. The system runs with CPU industrial BIOS extensions like setup-date in EEPROM clock speeds of 33 MHz or 66 MHz. The pinout of the as well as a remote control-function, allowing the DIMM-Bus connector corresponds to the pinout of the operation with an external PC as terminal (software ISA bus connector. Therefore the two PC systems with JRC-1). different form factors are electrically compatible. Only Ordering Information Article Part.-No. Description DIMM-PC/486-I 08007-1616-66-0 with 16 MByte DRAM and 16 MByte IDE compatible ţ ash disk DIMM-PC/486-I 08007-1600-66-0 with 16 MByte DRAM and 0 MByte IDE compatible ţ ash disk DIMM-PC/486-I 08007-0400-66-0 with 4 MByte DRAM and 0 MByte IDE compatible ţ ash disk Accessories Article Part.-No. Description ® DIMM-PC/KIT-2 08005-0000-00-3 Starter Kit for DIMM-PC with PC/104 interface DIMM-PC/VGA1 and with cable for FDD/2.54 ® IDE/2.54 and manuals (without DIMM-PC ) DIMM-PC/VGA1 08006-0000-00-0 VGA controller for CRT and LCD ţ atpanel DIMM-PC/ETN1 08006-0000-01-0 Ethernetcontroller DIMM-PC/COM1 08006-0000-02-0 Two serial interfaces DIMM-PC/COMBO1 08006-0000-03-0 VGA, Ethernet and two serial interfaces ® DIMM-PC/Socket-CPU SPCDIMM Socket for DIMM-PC , 144 Pin (90 pcs. packed) ® DIMM-PC/Socket-I/O SIODIMM Socket for DIMM-PC I/O module 144 Pin (90 pcs. packed) JRC1 96047-0000-00-0 Remote Control Software with serial cable (License charge once to pay!) ® JUMPtec Industrielle Computertechnik AG +++ Brunnwiesenstr. 16 +++ 94469 Deggendorf +++ Phone +49 (0) 991-37024-0 +++ Fax 37024-102 +++ www.jumptec.de +++ 2-7 40 mm (1.6“)