Submittal Spec Sheet ® ® Eaton Innovative Technology HS-30A Models Surge Protective Devices Mechanical and Electrical Features ® Enclosure — ABS Plastic UL 94-5VA Connection — Wire clamping box terminals 2 – Minimum 18 AWG (0.8 mm ) wire size 2 – Maximum 10 AWG (5.0 mm ) wire size Weight — ≈1 lb (0.45 kg) Operating Temperature — -40°F (-40°C) to +140°F (+60°C) Circuit Description — Multi-stage hybrid network utilizing circuit encapsulation and Advanced Surge Path Technology HS-30A Model Protection Modes — All Mode: Dedicated L-N (normal mode), Dedicated L-G, N-G (common mode) Introduction Input Power Frequency — 0 – 64 Hz (ac) Since 1980, Eaton’s Innovative Technology has provided Surge Response Time — Active <1 nanosecond Protective Devices (SPDs) to power quality equipment users around the world. Whatever your electrical surge protection Maximum EMI/RFI Attenuation — Mil-Std-220 need may be, Eaton’s Innovative Technology has a Surge Protective Device to fi ll it! Maximum Attenuation 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz Frequency General Features 3 dB 21 dB 38 dB 36 dB 15 dB 47 dB @ 16 kHz Description — Series or parallel wired, terminal strip connected, Multi-stage hybrid Active Tracking Network Maximum Continuous Operating Current — 30 Amps rms up ® (ATN ) enhanced sine wave tracking surge protective device to 250 volts Application — Dedicated ac power circuits, ≤30 amps, Short Circuit Current Rating — 200 kAIC when protected by feeding variable speed drives, process controllers, PLCs, Class R, 30 Amp fuse power supplies, microprocessor-based loads, CNCs and a wide variety of other mission-critical and general-purpose individual loads Warranty — 10-Year Free Replacement ® Unit Listings — Recognized components under UL 1449 ® Second Edition, UL 1283 ® Manufacturer Qualifi cations — ISO 9001:1994 Quality System Certifi cation BSI FM 30833 3.19 (81.0) 2.25 (57.2) 5.77 (146.6) 5.25 Dimensions are in (133.4) Inches (mm) 4.61 (117.1) 3.23 (82.0) Optional DIN Rail Mounting Kit (#420-9100) Performance Data ANSI/IEEE C62.41-1991 Mesured Limiting Voltage* UL SVR A1 A3 B3/C1 UL 1449-2 Ring Wave Ring Wave Impulse Wave Suppressed 2 kV, 67 A 6 kV, 200 A 6 kV, 3 kA Voltage Peak Nominal 180° Phase Angle 90° Phase Angle 90° Phase Angle Ratings Surge System Available Current Voltage L-N L-N L-N L-N Models Phase/Mode (ac-Vrms, dc-Vpk) L-G, N-G L-G, N-G L-G, N-G L-G, N-G HS-120-30A 80 kA/40 kA 48 – 150 Vac 30 240 430 400 48 – 200 Vdc 70, 50 340, 140 420, 430 400, 400 HS-250-30A 80 kA/40 kA 120 – 275 Vac 60 400 760 800 120 – 300 Vdc 90, 50 520, 140 790, 770 800, 800 * Test environment: Positive polarity. Tested with ac power applied. All units tested at terminals, time base = 1 ms. ® All measurements referenced from zero volts per NEMA LS-1. Innovative technology is a registered service mark of Eaton Corporation. Active Tracking Network (ATN) is a registered trademark of Eaton Corporation. UL is a federally registered trademark of Underwriters Laboratories Inc. ISO is the registered trademark and sole property of the International Organization for Standardization. NEMA is the registered trademark and service mark of the National Electrical Manufacturers Association. Eaton Corporation EXCLUSIVE Innovative Technology TVSS Products I.T. 10 YEAR 1000 Cherrington Parkway Moon Township, PA 15108-4312 USA Phone: 1-800-647-8877 Web: www.eatonelectrical.com/itvss FREE REPLACEMENT © 2004–2007 Eaton Corporation All Rights Reserved Printed in USA Form No. PS01006042E / Z2990 February 2007