H N G Submittal Spec Sheet Eaton Innovative Technology HS-DIN-IP Series Surge Protective Devices Mechanical and Electrical Features ● Enclosure — ABS Plastic UL94V-0 ● Connection — Wire clamping box terminals; minimum 22 AWG 2 2 (0.34 mm ) wire size – maximum 12 AWG (4.0 mm ) wire size. ● Weight — ≈.45 kg (1 lb.) ● Operating Temperature — -40°C (-40°F) to +60°C (+140°F) ● Protection Modes — Discrete All Mode L-N/Pos-Neg (normal mode), L-G/Pos-Gnd (common mode) ● Input Power Frequency — 47 – 64 Hz (ac) ● Response Time — <1 nanosecond ● Circuit Interrupt — Reference installation instructions for details Maximum EMI/RFI Attenuation — Mil-Std-220 Maximum Attenuation 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz Frequency 0dB 11dB 29dB 29dB 14dB 34dB@305kHz 3.38 (86.0) HS-DIN-IP Series 2.73 Introduction (69.3) Since 1980, Eaton’s Innovative Technology has provided Surge Protective Devices (SPDs) to power quality equipment users around the world. Whatever your electrical surge protection need may be, Eaton’s Innovative Technology has a Surge Protective Device to fill it! General Features 1.92 ● Description — 40 kA, parallel wired, terminal strip connected, (48.8) Multi-stage Hybrid Active Tracking Network (ATN ) surge 1.53 protective device (39.0) ● Application — Dedicated ac power circuits feeding a wide 0.79 variety of mission critical and general purpose individual loads (20.1) ● Warranty — Ten-Year Free Replacement ● Unit Listings — Recognized components under UL 1449 0.25 Second Edition and cUL , UL 1283 filter (6.4) Dimensions are in inches (mm) 0.49 ● Manufacturer Qualifications — ISO 9001:1994 Quality (12.4) System Certification BSI FM 30833 ANSI/IEEE C62.41-1991 Measured Limiting Voltage* Performance Data (All results peak ± 10%) UL 1449-2 PTE Models PTE Models PTE Models Suppressed A1 Ring Wave A1 Ring Wave B3/C1 Impulse Wave Voltage 2 kV, 67 A 2 kV, 67 A 6 kV, 3 kA Ratings 180° Phase Angle 90° Phase Angle 90° Phase Angle IEC 61643-1 Parameters MCOV 50/60 Hz L-N L-N L-N L-N Model (U ) L-G, N-G L-G, N-G L-G, N-G L-G, N-G I I U Class c n max p HS-DIN-120 IP 150 Vac 400 60 230 490 15 kA 40 kA < 400 2/3 400, 400 120, 60 290, 60 530, 490 HS-DIN-250-IP 320 Vac 800 60 400, 980 15 kA 40 kA < 800 2/3 900, 800 120, 70 450, 60 1070, 1040 *Test environment: all units tested at terminals. Time base = 1 ms. All measurements referenced from zero volts per NEMA LS-1. Innovative Technology is a registered service mark of Eaton Corporation. Active Tracking Network (ATN) is a registered trademark of Eaton Corporation. NEMA is the registered trademark and service mark of the National Electrical Manufacturers Association. ISO is the registered trademark and sole property of the International Organization for Standardization. UL and cUL are federally registered trademarks of Underwriters Laboratories Inc. Eaton Corporation Innovative Technology TVSS Products EXCLUSIVE I.T. 10 YEAR 1000 Cherrington Parkway Moon Township, PA 15108-4312 USA Phone: 1-800-525-2000 Web: www.itvss.com FREE REPLACEMENT ©2004–2007 Eaton Corporation All Rights Reserved Printed in USA Form No. PS01006026E / Z2990 May 2007