GE Intelligent Platforms CP11 ® Dual Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Features The CP11 is a 6U CompactPCI CPU board (200 MHz) with enhanced ECC, four ® ™ with integrated dual core Intel Core 2 Duo or independent on-board PCI buses, system • Intel Core 2 Duo processor, 1.5 GHz and Intel Core Duo Processor and dual Gigabit host and peripheral mode support for the 2.16 GHz Ethernet PICMG 2.16 channels. The Intel CPCI backplane, two PMC interfaces (64- ® ™ • Intel Core Duo processor 1.66 GHz and dual core processor includes two optimized bit/133 MHz and 32-bit/33 MHz). Instead 2.0 GHz ™ execution cores in a single processor case. of the PMC1, a PCI Express based XMC ® • Intel Celeron M processor ULV 423, 1.06 GHz This enables execution of parallel threads interface is available on request. A high • PICMG 2.1 (Hot Swap ) compliant or applications on separate cores with level of functional integration (two Gigabit dedicated CPU resources. The CP11 supports Ethernet, one Fast Ethernet, two serial • Ultra compact, two slots a 32- and 64-bit processor architecture. interfaces (RS-232 or RS-422/485), USB 2.0, • System and non-system functionality CP11 is designed to meet the requirements integrated HDD or Flash drive) gives users • Up to 4 GB DDR2 SDRAM (200 MHz) with ECC of markets such as automation, simulation/ the freedom to use the PMC interfaces • Flash drive or local UDMA100 2.5” hard disk training, test and measurement, and military. for their application specific I/O. The VGA/ DVI interface is supported through a high • 2x SATA, RAID 0/1 capable ® Based on the Intel Core Duo Processor, the performance 2D/3D ATI video controller • Front/rear VGA up to 1280 x 1024, rear platform is designed to support processor capable of driving two displays in parallel. DVI-I up to 1280 x 1024, 32 MB RAM speeds from 1.06 GHz up to 2.0 GHz. The • Two Gigabit Ethernet ports 10/100/1000 Intel Core 2 Duo runs at 1.5 GHz and 2.16 Versions with front panel I/O are available in BaseT front or rear optional GHz. Rugged needs are addressed with an various configurations with one or two • PICMG 2.16 compliant optional extended temperature range of PMC interfaces. The PMC1 interface can be up to -40 °C to +75 °C (depends on selected ordered as an XMC interface instead. • One front Fast Ethernet port board options) and conformal coating is • Two PMC extension slots, one 64-bit/133 ® Supported operating systems are Windows , available on request. MHz and one 32-bit/33 MHz ® ® Linux and VxWorks. Integrity is available • One XMC interface on request The CP11 provides a unique feature set, on request. including up to 4 GB of DDR2 SDRAM • 2 x serial I/O with FIFOs RS-232/422/485 interface • 4 x USB 2.0 ports, two front and two on rear • Audio codec • Watchdog, temperature sensors • Optional –40 °C to +75 °C • Conformal coating on request • Customer specific, low cost assembly versions • RoHS compliant ® CP11 Dual Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor ® ™ VGA and DVI – ATI X300 Specifications • 256-bit 3D and 2D graphics accelerator Processor - µFCBGA, Low Power Design • On-chip 32 MB memory • Scalable processing power with flexible • PCI Express x4 interface processor design • Dual CRT/Simultaneous Dual Display (same or • Supports 32-bit and 64-bit processor architecture different surfaces) • 64-bit: Intel Core 2 Duo processor: 1.50 GHz • Integrated 300 MHz Palette DAC for analog VGA and 2.16 GHz monitors up to 1280 x 1024 ® • 32-bit: Intel Core Duo processor: 1.66 GHz and 2 GHz • Single channel DVI-I interface PanelLink for TFT • 32-bit: Intel Celeron M processor ULV 423: 1.06 GHz displays up to 1280 x 1024 true color (EDID displays PnP supported) • High efficiency on-board switching regulator (DC/ DC) • Fully compliant support for OpenGL for all Windows • Fanless cooling with heat sink operating systems and Linux • Versions with front or rear I/O * Contact factory for latest CPU versions Processor FSB MHz Level 2 Cache EIDE – 6300ESB Core 2 Duo 667 4 MB • Ultra ATA/100 sync. DMA mode up to 100 MB/s Core Duo 667 2 MB • PIO mode 4 and bus master IDE up to 16 MB/s Celeron M 533 1 MB • One device via on board connector and two devices via rear I/O available CompactPCI – PLX 6466 PCI-to-PCI Bridge • PICMG 2.0 R3.0 compliant CPCI local bus standard General Purpose I/O • 64-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) or • 8 GPIO (input or output) pins 5 slots (66 MHz) • Software configurable • Supports System Host and Peripheral Mode USB 2.0 – 6300ESB • J1+2, 2 mm pin and socket connectors • Two USB 2.0 channels on rear I/O (IEC-1076-4-101) • Two USB 2.0 channels on front Chipset – Intel E7520/6300ESB Keyboard, Mouse • Four parallel PCI Express connections to major components for maximum I/O throughput • Via USB • Legacy PS/2 controller emulation Memory – DDR2-400 Real-time clock • High-speed registered DDR2 SDRAM with 400 MHz • RTC 146818 compatible • 144-bit wide with enhanced error correction (ECC) • Li-battery • 32-bit CPU: up to 4 GB soldered memory (usable size depends on operating system) CMOS RAM • 64-bit CPU: up to 4 GB soldered memory • 242 bytes non-volatile CMOS RAM for BIOS use Dual Gigabit Ethernet – Intel 82571EB EEPROM • Dual Channel Ethernet Controller with PCI • 512 Kbit serial EEPROMs for non-volatile user data Express x4 interface • 10/100/1000BaseT auto-negotiation Floppy • Front and/or rear I/O • Via USB • Compliant to PICMG 2.16 Watchdog Fast Ethernet – Intel 82551QM • Intel TCO timer • Single channel Ethernet Controller • Intel 6300ESB watchdog • 10/100BaseT auto-negotiation Timer • Front I/O • Integrated in 6300ESB chipset Hard Disk or Flash Drive • Legacy PC-AT timer • Internal 2.5” UDMA100 IDE hard disk or Flash Drive • High Precision Event Timer (HPET) for extended temperature range and higher shock/ Temperature Sensors vibration immunity) • CPU die and pcb temperature software readable in PMC Extension Slots - IEEE P1386/1386.1 the range of –55 °C to +125 °C • PMC1 (64-bit/133 MHz) and PMC2 (32-bit/33 MHz), LED (not in conduction cooled style) XMC (PCIe x4) on PMC1 available on request. • Front panel ACPI System Status Indicator LED • Enhancement to processor PMC standard VITA (red/amber/green) 32-2003 (non-monarch) • CompactPCI hot swap (blue) on front panel • PMC1 signaling is 3.3 V only, PMC2 signaling is 5 V tolerant. Audio • Line In, CD In Serial I/O - RS232/422/485 • Two async. 16550 compatible full duplex serial • Headphone, SPDIF Out channels at rear I/O • AC97 link with codec • High-speed transfer up to 115.2 Kbaud with 16 byte FIFOs • User selectable RS232/422/485 interface • COM1 optionally available at front via RJ45 ® CP11 Dual Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Hot Swap - compliant to PICMG 2.1 Power Consumption - typical operating current • Peripheral mode: Full CompactPCI Hot Swap • Without keyboard, hard disk, modules, Ethernet (no link), measured at DOS prompt, no power savings. • System Host mode: CompactPCI ENUM# event 512 MB memory option. supported through ACPI or legacy driver Processor 5 V 3.3 V Total Power BIOS Features • AMI BIOS Core 8, in-system programmable Flash ROM Core 2 Duo, 2.16 GHz 4.9 8.4 52.2 • Automatic system configuration Core 2 Duo, 1.5 GHz 3.1 8.4 43.2 Core Duo, 2.00 GHz 4.0 8.4 47.7 • Integrated VGA, SATA RAID and Ethernet PXE ROM • USB Mass Storage support Core Duo, 1.66 GH 2.7 8.4 41.2 • Password protection Celeron M, 1.06 GHz 1.2 8.4 33.7 • Headless support • Without keyboard, hard disk, modules, Windows XP, • Remote console through serial port 3D graphics active. Both Gigabit Ethernet channels linked, CPU running at instruction mix for maximum Software power consumption. • The following software is supported to the extent 2 GB memory option. listed below Processor 5 V 3.3 V Total Power OS On Request Planned Available Core 2 Duo, 2.16 GHz 7.1 10.1 68.8 Windows √ Core 2 Duo, 1.5 GHz 4.1 10.1 53.8 Linux √ Core Duo, 2.00 GHz 5.8 10.1 62.3 VxWorks √ Core Duo, 1.66 GHz 3.7 10.1 51.8 Integrity √ Celeron M, 1.06 GHz 1.4 10.1 40.3 Front and Rear I/O (with transition module CTM17) Power Allowances – PMC/XMC slots • The pin outs of the transition module connectors • +5 V, +3.3 V: Total power max. 7.5 W (rear I/O) correspond to standard PC connectors • ±12 V: 100mA each (press-fit cables). Mechanical – PICMG 2.0 Function Front Rear • 6U, 2 slots wide, (233 x 160 x 40) mm with Flash Drive Style 1 / 3 J3 / J4 /J5 1, or hard disk DVI-I - √ 1, VGA √ √ Temperature 2 2 Gigabit Ethernet 1 √ √ • Note: For detailed information about the operating 2 2 Gigabit Ethernet 2 √ √ temperature behavior of the board of any style it Fast Ethernet √ - is absolutely necessary to consult the manual. Reset √ √ The processor type and speed, altitude, the use or not use of Ethernet and video, ambient condi- LEDs √ √ tions and the type of cooling influences the board USB 2.0 1-4 1-2 3-4 temperature range. IDE primary onboard IDE secondary √ Temperature SATA 1 √ • All values under typical conditions without PMC module SATA 2 √ Range Operating Storage COM 1-2 1 1, 2 Standard 0 °C to +55 °C –40 °C to +85 °C Audio √ Extended –40 °C to +75 °C –40 °C to +85 °C GPIO (8 pins) - √ PMC 1 (XMC on req.) √ √ Operating Storage PMC 2 I/O √ √ Humidity 5 – 95 % @ 40 °C 5 – 95 % @ 40 °C 1 *Rear DVI-I connector for DVI and VGA Altitude 15,000 ft. (4.5 km) 40,000 ft. (12 km) 2 * Either front or rear as an order option Shock and Vibration Styles • Designed to meet VITA47 class EAC1 and EAC3 Function Style 1 Style 3 VITA 47 Front Panel yes yes • Designed to meet VITA47 class EAC1 and EAC3 Parts Soldered yes yes Li-Battery yes yes MTBF Ext. Temperature no yes • Calculations are available in accordance with MIL-HDBK-217. Power Requirements Please contact GE Intelligent Platforms. • +5 V, +3.3 V, +12 V Required Safety • -12 V If required by mounted PMC module • Designed to meet standard UL1950, CE class A, FCC-A ® CP11 Dual Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Block Diagram Intel Core 2 Duo Core Duo Processor PCI-E DDR2 SDRAM with ECC PMC1/XMC PCI-X (4 GB) (64-bit/133 MHz) Intel PCI-E PCI-E E7520 Intel VGA/DVI 6700 PXH PCI-E PCI PCI/PCI Dual Gigabit Bridge Ethernet SATA PCI PMC2 (32-bit/33 MHz) COM Intel USB 6300ESB LPC PCI GPIO Fast Ethernet AC97 EIDE Audio Hot Swap Ordering Information Hardware Accessories CTM17: I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SCC784UE05CP11R: 7U, 19” starter cage with 5 CPCI slots, backplane, HDD, DVD, power supply Operating Systems Extensive operating systems support is available, (see page 2 of this document). Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Embedded Systems. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-851A cPCI Backplane (64-bit/66 MHz)