GE Intelligent Platforms C2KA ® ® High Performance PICMG 2.16 6U CompactPCI Embedded Computer Features The C2KA is a rugged PICMG 2.16 compliant The C2KA features multiple I/O, including three 6U CompactPCI single board computer (SBC) Gigabit Ethernet ports, four RS-232/RS-422 ports, • PICMG 2.16 compliant featuring increased processor speeds, bus four RS-422/485 ports, two 1.5 Gbps SATA ports, • MPC7448 or MPC7447A PowerPC® G4 speeds and memory capacities make it an and three high-speed USB 2.0 ports. The host processor with 512 KB / 1 MB L2 excellent choice for advanced defense, convection model also provides one high-speed cache aerospace, and homeland security USB 2.0 port at the front panel. • MV64460 system controller (Discovery III) applications. bridge chip The C2KA includes 16 programmable GPIO ports • DDR333 SDRAM 1 GB with ECC The C2KA hosts the MPC7448 or the MPC7447A with independent interrupts. Each port can be • Soldered boot flash 256 MB with multi- PowerPC G4 processor from Freescale programmed for direction, input polarity, output level write-protection Semiconductor with core processor speeds up type, interrupt type (level or edge) and interrupt • Real-time clock with battery backup from to 1.4 GHz and 1 MB of on-board L2 cache. The mask. system processor is supported with a 167 MHz MPX • Watchdog from MV64460 System Bus. The C2KA hosts two 64-bit IEEE1386.1 PMC sites • Three 10/100/1000 Ethernets ports for expanding I/O capability. ® • Two 64-bit IEEE 1386.1 PMC extension The C2KA integrates the Marvell MV64460 slots System Controller (Discovery III) bridge chip, For increased flexibility, the PLX PCI 6254 cPCI which includes a high speed DDR333 SDRAM back plane bridge allows the C2KA to operate as • Four async RS-232 or sync/async RS-422 controller with 167 MHz interface that service a system controller or peripheral processor card. serial I/O ports (COM1, COM2, COM3, COM4) memory densities up to 1 GB. It also provides The C2KA is available in five ruggedization levels. two PCI interfaces: one 64-bit 33/66 MHz PCI • Four sync/async RS-422/485 ports bus interface shared with on-board devices (COM5–COM8) and PMC1, and one 64-bit 33/66 MHz • Three USB 2.0 ports at backplane; PCI/33/66/133 MHz PCI-X Bus interface additional port at front panel (convection- dedicated to PMC0. cooled configuration only) • Two 1.5 Gbps SATA 1.0 ports • 16 programmable GPIO ports with independent Interrupts • Dual temperature sensor • System and non-system (peripheral) mode • Ruggedization Level 1 – 5 • Non-RoHS for critical avionics applications • Temperature range (-40°C to 85°C) C2KA - High Performance PICMG 2.16 6U CompactPCI Embedded Computer Specifications Processor PMC Extension Slots - IEEE P1386/1386.1 Power Consumption • Motorola MPC7448 PowerPC G4 processor • Two VITA 30.1-2001 and ANSI/VITA 20-2001- • Tests performed with 7.5W PMC load • Core processor speeds up to 1.4 GHz compliant PMC sites +5V +3.3V • High performance, low power, 32-bit PowerPC • PMC0: 64-bit 33/66MHz PCI or 133MHz PCI-X PMC RISC architecture site on dedicated PCI bus 0 Peak: * 5.7A 4.10A • Superscalar processor • PMC1: 64-bit 33/66MHz PCI PMC site on shared PCI Inrush: 2.0A 2.0A • 32 KB L1 instruction and data caches bus 1 • 512 KB L2 on-chip cache • Both PMC sites provide 64-bit user I/O (rear I/O) BATT+: 10μA • 64-bit 167 MHz MPX system bus interface to • Both PMC sites (PCI busses) VIO configurable to Total: 42W +3.3V or +5V through on-board jumper DDR SDRAM • Soldered DDR333 SDRAM Real-Time Clock * Calculated values SDRAM controller from MV64460 system controller • • Real-time clock feature for timekeeping functions Mechanical • 64-bit (72-bit with ECC) 167 MHz memory bus Battery backup maintained through off-board • • PICMG 2.0 R3.0 and VITA 30.1 compliant • Capacity: 1 GB +3.3V supply (provided by system through • 6U, 1 slot wide backplane (BATT+) pin at cPCI_J5) Flash ROM • 233 mm x 160 mm x 20 mm • 256 flash memory Watchdog Timer Humidity (non-condensing) • Multi-level write-protection • MV64460 system controller • Operating: 5–95% @ 40°C • Programmable intervals PCI Interfaces • Storage 5–95% @ 40°C • Interrupt and board reset triggers • Two PCI bus interfaces from MV64460 system Altitude controller Temperature Sensor • Operating: 4.5 km (15,000 ft.) • PCI bus 0: 32/64-bit 33/66 MHz PCI/133 MHz PCI-X • CPU die and ambient temperature • Storage: 12 km (40,000 ft.) (dedicated to PMC0 site) • Software readable from –55°C to +125°C MTBF • PCI bus 1: 32/64-bit 33/66 MHz (shared by PMC1 Hot Swap Calculations are available in accordance with MIL- • site, USB controller, SATA controller, and PCI 6254 • PICMG2.1 Hot Swap-compliant HDBK-217. Please contact GE Intelligent Platforms PCI bridge) Power Requirements for latest values. • Both PCI buses configurable VIO (+3.3V or +5V +5V, +3.3V—required • through on-board jumpers) Safety • +12V required, -12V optional • Designed to meet standard UL1950/60950 10/100/1000 Ethernet • Battery backup for RTC (+3.3 on BATT+) Three 10/100/1000BaseT Ethernet port to rear I/O • Emissions Power Allowances - PMC slot • MACs provided by the MV64460 system controller • Designed to meet FCC Part15, SubPart A +5V, +3.3V, ±12V: Total power max. 7.5W per site • • Independent quad port PHY General-Purpose I/O • 16 programmable GPIO ports • Programmable for line direction (input, output), Environmental input polarity (inverted, non-inverted), output type (TTL, open-drain), interrupt type (edge, level Level 1 Level 2 Level 3 Level 4 Level 5 sensitive) and interrupt masking • +5V tolerant Cooling Method Convection Convection Convection Conduction Conduction • Independent interrupts for each port Conformal Coating Optional Standard Standard Standard Standard USB Ports High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C • Four USB 2.0 ports: three (USB1–USB3) to cPCI_J5 (all configurations) and one (USB4) to the front Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall panel (Convection version only) 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g /Hz** • Three speeds supported: USB1.0 (1.5 MHz), USB1.1 (12 MHz), and USB2.0 (480 MHz) Shock 20g*** 20g*** 20g*** 40g*** 40g*** cPCI Backplane Interface *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration • PCI 6254 cPCI bridge • PICMG 2.0 R3.0 compliant • 32/64-bit CompactPCI data transfers at 33/66 Input/Output MHz • Auto-detect firmware detects system slot for Front C2K-TM C2K-TM I/O J3 J4 J5 system controller or peripheral mode Panel Rear Panel On-board Serial I/O – RS-232/422 COM1, COM2 (RS-232 9 9 • Two serial ports from multi-protocol serial COM3, COM4 (RS-232) 9 9 controller (MPSC) integrated in the MV64460 system controller —COM1, COM2 COM1, COM2, COM3, COM4 (RS-422) 9 9 • Two serial ports from USARTs integrated in the COM5–COM8 (RS-422/485) 9 9 FPGA—COM3, COM4 COM1, COM2: Two independent serial ports • 10/100/1000BaseT Ethernet (ETH0, ETH1) 9 9 configurable as asynchronous RS-232 or 10/100/1000BaseT Ethernet (ETH2) 9 9 synchronous/asynchronous RS-422 available at cPCI_J5 GPIO (0–3) 9 9 • COM3, COM4: Two independent serial ports configurable as asynchronous RS-232 or 9 9 GPIO (4–15) synchronous/asynchronous RS-422 available at PMC0 I/O 9 9 cPCI_J4 • Software selectable PMC1 I/O 9 9 Serial I/O – RS-422/485 SATA1–2 9 9 • Four independently configurable USB1–3 9 9 synchronous/asynchronous RS-422/485 serial ports: COM5–COM8 available at cPCI_4 USB4 (C-style only) 9 USART integrated into FPGA • EM_BOOTSEL# / ROM_WP# 9 9 Serial ATA (SATA) • PCI-to-serial ATA host controller on PCI bus 1 C2KA - High Performance PICMG 2.16 6U CompactPCI Embedded Computer Block Diagram Ordering Information Configuration C2KA-112001: High Performance PICMG 2.16 6U CompactPCI Embedded Computer with MPC7447A processor, 1 GB DRAM, 256 MB Flash, UBOOT Boot ROM, and Level 1 ruggedization. A MPC7448 processor and ruggedization Levels 2 through 5 are available options. Hardware Accessories C2K-TM: I/O transition module for 6U backplane Operating Systems VxWorks and Linux Board Support Packages are available. For detailed information and further options, contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit defense.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at defense.ge-ip.com. defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 09.11 GFA-1832