DISTRIBUTION AMPLIFIERS Extender Series ■ Drives VGA-QXGA signals long distances up to 250 feet (75 m) VGA-QXGA LINE DRIVERS WITH AUDIO ■ 300 MHz (-3 dB) RGB video bandwidth ■ One input, one buffered output ■ Active PC audio buffering ■ Peaking/gain control Extender AAP Extender D Extender WM AAP Extender WM The Extron Extender Series of VGA-QXGA line drivers with audio is designed to send high resolution computer-video signals up to 250 feet (75 m). Four models are available to facilitate a wide variety of architectural mounting requirements. www.extron.com FEATURES DESCRIPTION The Extron Extender Series is a family of one input, one buffered ■ Bandwidth – 300 MHz (-3 dB) RGB video bandwidth. output VGA - QXGA line drivers with audio. There are four models ■ Compatibility – Compatible with VGA-QXGA graphic cards, designed for wall or architectural mounting applications. ® monitors, and projectors, as well as Macintosh computers with Each line driver sends a high-resolution computer-video signal up to 15-pin HD outputs. 250 feet (75 meters) through high quality coax cable, such as the Extron BNC-5 Mini HR Cable. Output is on five female BNC ■ Video peaking/gain – A three-position switch provides various connectors on a 3-inch (7.6 cm) pigtail for simple and versatile levels of signal boost and high frequency equalization to maintain connections. All models ship with an external power supply. video signal integrity over long cable runs. The Extender Series products provide video amplification and peaking ■ Active PC audio buffering – Converts unbalanced PC audio to to compensate for the voltage losses and high frequency attenuation that normally occur in long cable runs. A three position dip switch balanced, line level audio, eliminating noise usually associated with lets the installer select the appropriate signal boost for various cable unbalanced audio when distributed over long cable runs. lengths, providing a more detailed image with greater contrast. ■ Power and signal present indicator – A dual color LED illuminates Extenders also restore the low level sync voltages found on many yellow to indicate power, and green to indicate that a signal is laptops (as low as two volts) to normal TTL levels. This sync present at the input. restoration prepares the signals for long cable runs and offers enhanced compatibility with a wide range of computers, display ■ External international power supply included – The devices, and cable types. autoswitchable external power supply provides worldwide power Extender Series products are compact so that when used with a wall compatibility (part # 70-055-01). box, there is ample space to make connections inside the box. The Extender WM AAP accommodates optional Extron Architectural Adaptor Plates (AAPs). There are dozens of Extron AAPs available, in a variety of A/V connector and control combinations. Extender D ® The Extender D mounts in a Decora -style wall plate (included) and can be used with or without a one-gang electrical box. Available in white. Extender WM The Extender WM can be wall-mounted in a one-gang Extender D electrical box and fits flush into a wall, podium, or table. Available in gray, black, white, and RAL9010 white. Extender WM Extender WM AAP The Extender WM AAP is like the Extender WM, but has openings for up to four optional single space AAPs. The Extender WM AAP can be wall-mounted in a three-gang box and fits flush into a wall, podium, or table. Available in gray, black, white, and RAL9010 white. Extender WM AAP Extender AAP The Extender AAP is a stand-alone, double space Architectural Adapter Plate. Available in gray, black, white, and RAL9010 white. Extender AAP SPECIFICATIONS VIDEO GENERAL Gain ............................................... 0 dB, 0.6 dB, 1.2 dB, selectable (whe n input External power supply ..................... 100 VAC to 240 VAC, 50/60 Hz, external, is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p) autoswitchable; to 12 VDC, 1 A (max.), Bandwidth ..................................... 300 MHz (-3 dB) regulated NOTE: ID bits are terminated (pins 4 and 11). Power input requirements ............... +12 VDC, 0.2 A Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / VIDEO INPUT 10% to 90%, noncondensing Operating: Number/signal type ........................ 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs +32 to +122 °F (0 to +50 °C) / 10% to 90%, Connectors .................................... (1) 15-pin HD female noncondensing Nominal level .................................. 0.7 Vp-p for RGB Rack mount Minimum/maximum levels ............. Analog: 0.3 V to 1.5 Vp-p with no offset at Extender AAP ............................... No, but wall or furniture mountable with unity gain optional AAP mounting faceplates Impedance ..................................... 75 ohms All other models ........................... No, but wall or furniture mountable in a Horizontal frequency ....................... 15 kHz to 135 kHz standard U.S. electrical wall box Vertical frequency ............................ 30 Hz to 170 Hz Enclosure type ................................. Metal Input coupling ................................ DC Enclosure dimensions Extender AAP VIDEO OUTPUT Faceplate ................................... 1.4" H x 3.5" W x 0.1" D (3.6 cm H x Number/signal type ........................ 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs 8.9 cm W x 0.3 cm D) (double space high Connectors .................................... 5 BNC female AAP plate) Nominal level .................................. 0.7 Vp-p for RGB Buffer ......................................... 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x Minimum/maximum levels ............. Analog: 0.3 V to 1.5 Vp-p with no offset at 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) unity gain Impedance ..................................... 75 ohms Extender WM DC offset ........................................ ±5 mV with input at 0 offset Faceplate ................................... 4.5" H x 2.8" W x 0.1" D (11.4 cm H x Return loss ..................................... <-35 dB @ 5 MHz 7.1 cm W x 0.3 cm D) (1 gang) Buffer ......................................... 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x SYNC 4.6 cm W x 1.9 cm D*) (*Depth excludes Input type ...................................... RGBHV, RGBS, RGsB, RsGsBs BNC connectors and cables.) Output type ................................... RGBHV, RGBS, RGsB, RsGsBs Extender WM AAP Input level ...................................... 2.0 V to 5.0 Vp-p Faceplate ................................... 4.5" H x 6.4" W x 0.1" D (11.4 cm H x Output level ................................... TTL: 5 Vp-p, unterminated 16.3 cm W x 0.3 cm D) (3 gang) Buffer ......................................... 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x Input impedance ............................ 510 ohms Output impedance ......................... 75 ohms 4.6 cm W x 1.9 cm D*) (*Depth excludes Max. propagation delay ................. 18.8 ns BNC connectors and cables.) Max. rise/fall time .......................... 4 ns Extender D Polarity ........................................... Positive or negative (follows input) Faceplate ................................... 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening AUDIO in a 1 gang Decora faceplate. *Height is Gain ............................................... Unbalanced output: 0 dB; balanced output: 3.8" [9.7 cm] including mounting tabs.) +6 dB Buffer ........................................ 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x Frequency response ....................... 20 Hz to 20 kHz, ±0.5 dB 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) THD + Noise .................................. 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level Product weight S/N ............................................... >90 dB at rated maximum output Extender AAP .............................. 0.2 lbs (0.1 kg) Extender WM ............................... 0.2 lbs (0.1 kg) Stereo channel separation ............... >75 dB @ 20 Hz to 20 kHz Extender WM AAP ........................ 0.4 lbs (0.2 kg) AUDIO INPUT Extender D ................................... 0.2 lbs (0.1 kg) Shipping weight Number/signal type ........................ 1 stereo, unbalanced Connectors .................................... (1) 3.5 mm mini stereo jack Extender AAP ............................... 2 lb (1 kg) Impedance ..................................... >10k ohms unbalanced, DC coupled All other models ........................... 3 lbs (2 kg) Nominal level .................................. -10 dBV (316 mVrms) Vibration ...................................... ISTA 1A in carton (International Safe Transit Association) Maximum level .............................. +6 dBV unbalanced at 1% THD+N Listings ............................................ UL, CUL AUDIO OUTPUT Compliances ................................... CE, FCC Class A, VCCI, AS/NZS, ICES MTBF .............................................. 30,000 hours Number/signal type ....................... 1 stereo, balanced/unbalanced Connectors Warranty ......................................... 3 years parts and labor Extender WM, Extender WM AAP, Extender D NOTE: All nominal levels are at ±10% (1) 3.5 mm direct insertion captive screw Models Part Number connector, 5 pole Extender WM (gray) ........................ 60-398-02 Extender AAP ............................... (1) 3.5 mm captive screw connector, 5 pole Extender WM (black) ...................... 60-398-12 Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced Extender WM (white) ...................... 60-398-22 Nominal level .................................. -2 dBu, balanced; -10 dBV unbalanced Extender WM (RAL9010 white) ....... 60-398-52 Maximum level (Hi-Z) ..................... +14 dBu, balanced, at 1% THD+N Extender AAP (gray) ........................ 70-147-02 Maximum level (600 ohm) .............. +6 dBm, balanced, at 1% THD+N Extender AAP (black) ....................... 70-147-12 NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu. Extender AAP (white) ...................... 70-147-22 Extender AAP (RAL9010 white) ....... 70-147-55 Extender WM AAP (gray) ................. 60-405-02 Extender WM AAP (black) ............... 60-405-12 Extender WM AAP (white) ............... 60-405-22 Extender WM AAP (RAL9010 white) .. 60-405-52 Extender D (white) .......................... 60-759-22 Specifications are subject to change without notice. e ron om xt end M Seri 02 05 im in Ci t ar i m M el ea rm l ty in www. xt .c 33-612-01 D E er W es Max um: Maximum peak g rcui a bo d Med u : id-lev p king a Faceplate No a : Uni ga APPLICATION DIAGRAMS Projector Audio Laptop w/ Audio BNC-5 Mini HR Cable Extron Extender D VGA-QXGA line driver with audio PANEL DRAWINGS Power 9-18 VDC AUDIO IN COMPUTER IN Right Ring EXTENDER WM Right Tip Sleeve (s) Left Ring Left Tip Extender WM (Front) Extender WM (Back) AUDIO IN AUDIO IN COMPUTER IN COMPUTER IN AUDIO IN COMPUTER IN EXTENDER WM AAP Extender WM AAP Extender D Extender AAP 05-05 © 2005 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. 68-1132-01 REV. A AUDIO IN COMPUTER IN Power Audio 9-18 VDC L R