AVIONICS COMMUNICATION MODULE M4KH009 The M4KH009 is an intelligent, double-size, H009 interface module for the multimode, multiprotocol, Excalibur 4000 family of carrier boards. The M4KH009 provides a complete solution for developing and testing H009 interfaces and performing system simulation of the H009 bus, according to the standard H009 protocol. Each module of the M4KH009 contains 32K x 16 dual-port RAM for Data Blocks, control registers, and Look-up tables. In addition the module contains another 32K x 16 dual-port RAM for a Concurrent Monitor. All Data Blocks and control registers are memory mapped, and may be accessed in real-time. Each of the independent, dual-redundant M4KH009 modules may be programmed to operate in one of three modes of operation: Central Control Complex (CCC) mode with Concurrent Peripheral Unit operation (1–16 PUs), Peripheral Unit mode (Multiple – up to 16 PUs) and Bus Monitor mode. In addition, the module can simultaneously operate as an independent Internal Concurrent Monitor in CCC, Multiple PU or CCC/Concurrent PU modes. General Features ♦♦ 32K x 16 dual-port RAM for CCC/PU/Bus Monitor modes ♦ 32K x 16 dual port RAM for Concurrent Monitor mode ♦ ♦♦ Operates as CCC, Multiple PU or CCC/Concurrent PU ♦♦ Programmable Interrupts ♦♦ Error injection: Word Count, Bit Count, Parity & Gap Time ♦♦ Error detection: No clock on active bus, Manchester error, Parity error, Bit Count High, Bit Count Low, Word Count High, Word Count Low ♦♦ Variable amplitude transceivers for Clock and Data ♦♦ Programmable Time Tag resolution (PU & MON) CCC Mode Operation Environment ♦ Programmable Intermessage Gap ♦ Temperature: 0°–70°C standard temperature ♦ ♦ -40° to +85°C extended ♦♦ Programmable Frame Time temperature (optional) ♦ Programmable Retries ♦ ♦♦ Loop and Single Shot modes ♦♦ Humidity: 5%–90% noncondensing ♦ Adjustable skew between Clock and Data ♦ MTBF: 330,350 hours at 25°C, G ♦ ♦ F Host Interface ♦♦ Can simulate CCC and up to 16 PUs simultaneously ♦ 4000 family of carrier boards ♦ PU Mode ♦♦ Power: 5V @ 1.2 amp +/-12v@ 400 mA ♦ Simulates up to 16 Peripheral Units ♦ Software Support ♦♦ 32 bit Time Tag ♦ 1024 entry message stack ♦ C drivers with source code ♦ ♦ ♦♦ Adjustable skew between Clock and Data ♦♦ Exalt Plus: Excalibur Analysis Laboratory Tools (optional) Monitor Mode ♦ Hold 1184 messages in a circular buffer ♦ Additional software may be available on our ♦ ♦ website ♦♦ Monitor can run concurrently with other modes ♦ Filter messages based on PU/CI/CF/TR fields Ordering Information ♦ ♦♦ Interrupts based on PU/CI/CF/TR fields ♦♦ M4KH009 Standard temperature module ♦ 32 bit Time Tag ♦ Additional Options: ♦ ♦ -E Extended temperature module ♦♦ Adjustable skew between Clock and Data -001 With conformal coating Physical Characteristics Note: When ordering this module with a 4000 family ♦♦ Dimensions: 67mm x 93mm carrier board, use the module code specified ♦ Weight: 60g ♦ in the Module Ordering Information on our website, or in the User’s Manual of the carrier board. January 2008, Rev A-1 These specifications are subject to change without notification 311 Meacham Ave ♦ Elmont NY 11003 Tel [516] 327-000 / Fax: [516] 327-4645 e-mail: excalibur@mil-1553.com website: www.mil-1553.com