Elite.Parts

Description

EVOC CPC-1631CVD2NA Motorola Power PC CompactPCI Boards with VGA, CF, 2x LAN, Audio, 512MB SDRAM, PICMG 2.0-2.5 compliant, Selectable 6U Rear I/O board

Part Number

CPC-1631CVD2NA

Price

Request Quote

Manufacturer

EVOC

Lead Time

Request Quote

Category

PRODUCTS - C

Specifications

Audio

CPC-1631CVD2NA - N/A; CPC-RP602 - Onboard ALC650 audio controller, with Line-out, Mic-in, Line-in

Board Type

CompactPCI 6U

Supports 1 x CF Socket Type I/II via IDE independent channel

Dimensions

CPC-1631CLD2NA - 233mm x 160 mm x 4HP(1-slot width); CPC-RP602 - 233mm x 80mm x 4HP(1-slot width)

Display Chipset

Onboard SM712GF4 graphics controller

Display Memory

Supports up to 16MB independent memory(optional)

Embedded OS

Linux/VxWorks

Ethernet Chipset

CPC-1631CVD2NA - 2 x Realtek RTL8139DL, Supporting 2 x10/100Mbps Ethernet interface based on PCI bus; CPC-RP602 - N/A

Ethernet Connector

CPC-1631CVD2NA - 2 x RJ45; CPC-RP602 - 2 x RJ45(optional)

Hardware Monitor

Monitors system status, voltage, temperature and fan speed etc.

IDE

1 x IDE interface, available interface of 44-pin header onboard

KB/MS

CPC-1631CVD2NA - N/A; CPC-RP602 - 1 x PS/2(KB/MS) Port

Operating Humidity

5%-95%, non-condensing

Operating Temperature

-15C ~ 55C

Parallel Port

CPC-1631CVD2NA - N/A; CPC-RP602 - 1 x parallel port

PMC

CPC-1631CVD2NA - 1 x PMC connector with 32-bit PCI bus; CPC-RP602 - N/A

Power Consumption

Typical 11.55W(processor - Motorola 8245, System Memory - 512M SDRAM)

Power Supply

Supports CPCI power supply

Processor

Motorola MPC8245
Onboard Motorola 8245 350MHz processor

Resolution

VGA mode up to 1280 x 1024@75Hz

Serial Port

CPC-1631CVD2NA - 1 x RS-232(COM1, RJ45 port), 1x RS-232 (COM3, 10-pin header onboard); CPC-RP602 - 1 x RS232/422/485 (COM2,DB9 port)

Standard

PICMG2.0, PICMG2.1 R2.0(hot swap), PICMG2.11 R1.0,PICMG2.3 R1.0, PICMG2.5 R1.0 H.110, IPVMI 1.5

Storage Temperature

-20C ~ 75C

System Chipset

VT82C686

System Memory

Onboard 512MB SDRAM, 8MB flash, and 1M boot BIOS for optional

USB

CPC-1631CVD2NA - 2 x USB2.0 port; CPC-RP602 - 2 x USB2.0 port

Watchdog Timer

1~255 sec./min. timer system reset or interrupt, setup by software

Features

Onboard 512MB SDRAM, 8MB flash, and 1M boot BIOS(optional)
Onboard Motorola 8245 350MHz processor, with 133MHz FSB
PICMG 2.0 R3.0 CompactPCI specification compliant
PICMG 2.1 R2.0 Hot Swap specification compliant
PICMG 2.3 PMC I/O specification compliant
PICMG 2.5 R1.0 H.110 CompactPCI Computer Telephony Specification compliant
Selectable 6U rear I/O board: CPC-RP602
Supports 1 x VGA port via SM712GF4 graphics controller
Supports 2 x 10/100Mbps Ethernet interface

Datasheet

EVOC-CPC-1631CVD2NA-datasheet.pdf

1416 KiB

Download

Extracted Text

CPCI Platforms CPCI Platforms 6U CompactPCI Boards 6U CompactPCI Boards Board Diagram Dimensions CPC- 1631CVD2NA Flash ROM Motorola Power PC CompactPCI Boards with VGA/CF/2LAN/Audio Local Bus PMC 44-pin IDE Onboard 512MB SDRAM JTAG MPC8245 Buffers Processor PCI Bus PCI-CPCI PMC SM712 2 x RTL8139D Bridge Interface VT82686B Ethernet controller CF socket VGA COM Port J1/J2 J3 2 x USB COM 2xRJ45 Connector Connector ports 1 1 Full-Size/Half-Size Full-Size/Half-Size Slot CPU Cards Slot CPU Cards J5 Connector LPT/COM2 IDE 1-2 USB1- COM1 USB3-4 Interface 2 2 LAN2 2 LAN1 LPT Audio 2 x USB COM1 SBC/Motherboard/ SBC/Motherboard/ Modules Modules Available Accessories 3 3 Name Description Qty. Embedded Part Number Embedded Box PC Box PC VGA LAN2 LAN1 1 N/A User Manual/RoHS CPC-1631CVD2NA Features 1 N/A Operating system driver CD/VCD/RoHS CPC-1631CVD2NA/LINUX trial version/V2.0 Onboard Motorola 8245 350MHz processor, with 133MHz FSB 1 4 2330-000011 Jumper/RoHS Pitch: 2.0mm, black, sealed tail 4 Onboard 512MB SDRAM, 8MB flash, and 1M boot BIOS(optional) Network Application Network Application Wide 1 Computers0C 2360-007961 HDD flat cable/RoHS 44P/2.0mm pitch dual punching/gray/length: 30mm Computers Supports 2 x 10/100Mbps Ethernet interface Memory 2.5 On Board Supports 1 x VGA port via SM712GF4 graphics controller Temperature 2 2373-001980 Sponge washer 270x225x8 PICMG 2.5 R1.0 H.110 CompactPCI Computer Telephony Specification compliant 1 2390-000471 Spring piece/RoHS PMC spring piece/R-931048050004152 SUS/301/1/2H PICMG 2.3 PMC I/O specification compliant 5 5 PICMG 2.1 R2.0 Hot Swap specification compliant Industrial PC Industrial PC PICMG 2.0 R3.0 CompactPCI specification compliant Related Product Selectable 6U rear I/O board: CPC-RP602 Item Typical Recommendation Specifications 6 6 CPCI Chassis HMI CPC-8202, CPC-8203, CPC-8402, CPC-8403, CPC-8404 HMI System Display Rear I/O Board CPC-RP602 Display port 1 x VGA port Processor Onboard Motorola 8245 350MHz processor Chipset Onboard SM712GF4 graphics PMC Expansion PMC-2LAN Chipset VT82C686 controller Memory onboard 512MB SDRAM, 8MB flash, and 1M boot BIOS for optional 7 7 EVOC Rugged Memory Supports up to 16MB independent EVOC Rugged Hardware Monitor Monitors system status, voltage, temperature and fan speed etc. Series Series memory(optional) Watchdog Timer 1~255 sec./min. timer system reset or interrupt, setup by software Resolution VGA mode up to 1280 x 1024@75Hz Standard PICMG2.0, PICMG2.1 R2.0(hot swap), PICMG2.11 R1.0, Ordering Information Dual Display N/A PICMG2.3 R1.0, PICMG2.5 R1.0 H.110, IPVMI 1.5 8 Mechanical and Environmental 8 Storage Interface Model Number Part Number Description MCC Series MCC Series Dimensions CPC-1631CLD2NA: 233mm x 160 mm CPC-1631CVD2NA CPC-RP602 0030-003230 CPC-1631CVD2NA Motherboard x 4HP(1-slot width) Serial ATA N/A N/A 0030-003231 CPC-1631CVD2NA Motherboard/RoHS CPC-RP602: 233mm x 80mm x 4HP(1- IDE 1 x IDE interface, available interface of N/A slot width) 44-pin header onboard 0060-001200 CPC-RP602 Rear I/O Board 9 9 Operating Temperature -15 ~55 CF Supports 1 x CF Socket Type I/II via IDE N/A Chassis Chassis 0060-002360 CPC-RP602/ conformal coating Rear I/O Board Storage Temperature -20 ~75 independent channel Operating Humidity 5%-95%, non-condensing I/O Interface Power USB 2 x USB2.0 port 2 x USB2.0 port Power Supply Supports CPCI power supply 10 10 Serial Port 1 x RS-232(COM1, RJ45 port),1x RS-232 1 x RS232/422/485 (COM2,DB9 Power Consumption Typical 11.55W(processor: Motorola 8245, Data Acquisition Data Acquisition (COM3, 10-pin header onboard) port) Boards & Modules Boards & Modules system memory: 512M SDRAM) Parallel Port N/A 1 x parallel port Operating System PMC 1 x PMC connector with 32-bit PCI bus N/A Windows OS N/A Audio N/A Onboard ALC650 audio controller, Embedded OS Linux/VxWorks 11 11 with Line-out, Mic-in, Line-in Accessories Accessories KB/MS N/A 1 x PS/2(KB/MS) Port Ethernet Chipset 2 x Realtek RTL8139DL, Supporting 2 x N/A 10/100Mbps Ethernet interface based on PCI bus Connector 2 x RJ45 2 x RJ45(optional) 2-197 2-198 The images are for reference only, and all product specifications are subject to change without notice. The images are for reference only, and all product specifications are subject to change without notice.

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products