Manufacturers
ELECTRA ELX10
Description
Electra ELX10 Phosphor Pastes
Part Number
ELX10
Price
Request Quote
Manufacturer
ELECTRA
Lead Time
Request Quote
Category
PRODUCTS - E
Datasheet
Extracted Text
TECHNICAL DATA SHEET
ELECTRALUX
ELX10
1-COMPONENT PHOSPHOR PASTE
ELECTRO LUMINESCENT LAMP APPLICATIONS
PRODUCT DESCRIPTION
ELX10 is a range of phosphorescent pastes designed to be used with ELX80 Dielectric and ELX30 Silver
Conductor over indium tin oxide (ITO) coated polyester substrates in the construction of electro luminescent
(EL) lamps.
Recommended lamp construction:
ELX30
ELX40
Silver Rear
UV Curing
Electrode
Coverlay
3 Coats
ELX80 Dielectric
Indium Tin Oxide
Polyester Substrate
ELX30
ELX10
Silver Bus Bar LIGHT
Phosphor Paste
Figure 1 – Recommended EL lamp construction
Brightness:
1
A power supply of 100V/400Hz will give a brightness of up to 400 Lux depending on material type:
o ELX10-Or Orange 70 Lux
o ELX10-W White 95 Lux
o ELX10-G Green 400 Lux
o ELX10-B Blue 300 Lux
1
(All measurements using ISO-TECH ILM350 meter)
www.electrapolymers.com
ELX10rev5
Page 1 of 3
PROCESSING
Mixing: ELX10 may settle on storage. It is important that materials are thoroughly mixed prior to use.
Printing: Mesh: 55 - 77T polyester
Drying: 2 to 10 minutes at 110-130°C
Required time will depend on drying system (e.g. circulation and exhaust)
Note:
It may be necessary to allow a short time for de-bubbling and levelling prior to the drying stage to ensure a
smooth coating.
VISCOSITY ADJUSTMENT
All ELX10 pastes are supplied ready to print however if lower viscosities are required, ELX10 should be reduced
using ER17 Reducer. Care should be taken not to add too much reducer since this may adversely affect print
properties.
SHELF LIFE:
Minimum 12 months from date of manufacture, when stored in cool dry conditions.
CLEAN-UP:
After printing, the screen and utensils should be cleaned of residual material using Universal Screenwash
SW200.
STORAGE:
Store between 10°C – 25°C in a dry store. Avoid subjecting containers to temperatures below 5°C because of
risk of splitting.
Dense components may settle during storage. It is recommended that materials are kept on roller or similar
device when not in use.
FINAL PROPERTIES
Flexibility: 3mm mandrel PASS
Adhesion: Tape-test PASS
Hardness:
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ELX10 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods